HP 3500-48G-PoE+ yl, J9311A, J9310A, J8693A, J8692A Specification

HP 3500-24G-PoE yl Switch HP 3500-48G-PoE yl Switch

Models

HP 3500-48G-PoE+ yl Switch

J9311A

HP 3500-24G-PoE+ yl Switch

J9310A

HP 3500-48G-PoE yl Switch

J8693A

HP 3500-24G-PoE yl Switch

J8692A

HP 3500-48-PoE Switch

J9473A

HP 3500-24-PoE Switch

J9471A

HP 3500-48 Switch

J9472A

HP 3500-24 Switch

J9470A

Key features

Advanced access layer and small distribution
Enterprise-class performance and security
Intelligent edge feature set with L2 to L4 support
Scalable 10/100/1000 PoE+ and 10/100 PoE
Unified core-to-edge HP ProVision software

Product overview

The HP 3500 Switch Series consists of advanced intelligent-edge switches, available in 24-port and 48-port fixed-port models. The
foundation for these switches is a purpose-built, programmable HP ProVision ASIC that allows the most demanding networking
features, such as quality of service (QoS) and security, to be implemented in a scalable yet granular fashion. With a variety of Gigabit
Ethernet and 10/100 interfaces; integrated PoE+, PoE, and non-PoE options; and versatile 10GbE connectivity (CX4, X2, and SFP+) on
Gigabit Ethernet switches, the 3500 Switch Series offers excellent investment protection, flexibility, and scalability, as well as ease of
deployment, operation, and maintenance.

Features and Benefits

Software-defined networking

NEW

OpenFlow

supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths

Quality of Service (QoS)

Advanced classifier-based QoS

classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority
level and rate limit to selected traffic on a per-port or per-VLAN basis

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 1

Layer 4 prioritization

enables prioritization based on TCP/UDP port numbers

Traffic prioritization

allows real-time traffic classification into eight priority levels mapped to eight queues

Bandwidth shaping

Port-based rate limiting

provides per-port ingress-/egress-enforced increased bandwidth

Classifier-based rate limiting

uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port

Reduced bandwidth

provides per-port, per-queue egress-based reduced bandwidth

Class of Service (CoS)

sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ

Management

Remote intelligent mirroring

mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl,
5400 zl, or 3500 Switch anywhere on the network

RMON, XRMON, and sFlow v5

provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications

Uni-Directional Link Detection (UDLD)

monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional
link into a unidirectional one; this prevents network problems such as loops

Management simplicity

common software features and CLI implementation across all ProVision-based switches (including the zl and yl switches)

Command authorization

leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents
activity

Friendly port names

allow assignment of descriptive names to ports

Dual flash images

provide independent primary and secondary operating system files for backup while upgrading

Multiple configuration files

stores easily to the flash image

Comware CLI

Comware-compatible CLI

bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI

Display and fundamental Comware CLI commands

are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and
fundamental commands provide a Comware-familiar initial switch setup

Configuration Comware CLI commands

when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI comman

Connectivity

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 2

IEEE 802.3af Power over Ethernet (PoE)

provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras

IEEE 802.3at Power over Ethernet Plus (PoE+)

provides up to 30 W per port to IEEE 802.3 for devices that use PoE/PoE+, such as video IP phones, IEEE 802.11n wireless access
points, and advanced pan/zoom/tilt security cameras

Prestandard PoE support

detects and provides power to prestandard PoE devices; see list of supported devices in the product FAQs at

www.hp.com/networking

Jumbo frames

on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery
services

Auto-MDIX

provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

IPv6

IPv6 host

enables switches to be managed in an IPv6 network

Dual stack (IPv4 and IPv6)

transitions from IPv4 to IPv6, supporting connectivity for both protocols

MLD snooping

forwards IPv6 multicast traffic to the appropriate interface

IPv6 ACL/QoS

supports ACL and QoS for IPv6 network traffic

IPv6 routing

supports static and OSPFv3 routing protocols

6in4 tunneling

supports encapsulation of IPv6 traffic in IPv4 packets

Performance

High-speed/capacity architecture

up to 153.6 Gbps crossbar switching fabric provides intra- and inter-module switching with up to 111.5 million pps throughput
on the purpose-built ProVision ASICs

Selectable queue configurations

allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications

Resiliency and high availability

NEW Virtual Router Redundancy Protocol (requires Premium License)

allows groups of two routers to dynamically back each other up to create highly available routed environments

IEEE 802.1s multiple Spanning Tree Protocols

provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D
Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking

support up to 144 trunks, each with up to eight links (ports) per trunk

Distributed trunking

enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect
to two switches using one logical trunk for redundancy and load sharing

Uplink Failure Detection

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 3

provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming

NEW SmartLink

provides easy-to-configure link redundancy of active and standby link

Layer 2 switching

IEEE 802.1ad Q-in-Q (requires Premium License)

increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed
campus or metro network

HP switch meshing

dynamically load balances across multiple active redundant links to increase available aggregate bandwidth

VLAN support and tagging

supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously

IEEE 802.1v protocol VLANs

isolate select non-IPv4 protocols automatically into their own VLANs

GARP VLAN Registration Protocol

allows automatic learning and dynamic assignment of VLANs

Rapid Per-VLAN Spanning Tree (RPVST+)

allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

Layer 3 services

User Datagram Protocol (UDP) helper function

allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP

Loopback interface address

defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability

Route maps

provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

Static IP routing

provides manually configured routing for both IPv4 and IPv6 networks

Routing Information Protocol (RIP)

provides RIPv1 and RIPv2 routing

OSPF (requires Premium License)

provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing

Border Gateway Routing Protocol (requires Premium License)

provides IPv4 Border Gateway Routing Protocol that is scalable, robust, and flexible

Security

Access control lists

(ACLs)
provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a
per-VLAN or per-port basis

Multiple user authentication methods

IEEE 802.1X users per port

provides authentication of multiple IEEE 802.1X users per port

Web-based authentication

authenticates from Web browser for clients that do not support IEEE 802.1X supplicant

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 4

MAC-based authentication

client is authenticated with the RADIUS server based on client's MAC authentication

Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port

switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications

Virus throttling

detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the
routed VLANs or bridged interfaces without requiring external appliances

DHCP protection

blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks

Secure management access

delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3

USB Secure Autorun (requires HP PCM+)

deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering

Switch CPU protection

provides automatic protection against malicious network traffic trying to shut down the switch

ICMP throttling

defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic

Identity-driven ACL

enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each
authenticated network user

STP BPDU port protection

blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

Dynamic IP lockdown

works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

Dynamic ARP protection

blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data

STP Root Guard

protects the root bridge from malicious attacks or configuration mistakes

Detection of malicious attacks

monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks
is detected

Port security

allows access only to specified MAC addresses, which can be learned or specified by the administrator

MAC address lockout

prevents particular configured MAC addresses from connecting to the network

Source-port filtering

allows only specified ports to communicate with each other

RADIUS/TACACS+

eases switch management security administration by using a password authentication server

Secure Shell

encrypts all transmitted data for secure remote CLI access over IP networks

Secure Sockets Layer (SSL)

encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

Secure FTP

allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file

Management Interface Wizard

helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level

Switch management logon security

helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 5

Security banner

displays a customized security policy when users log in to the switch

Convergence

IP multicast routing (requires Premium License)

includes PIM Sparse and Dense modes to route IP multicast traffic

IP multicast snooping (data-driven IGMP)

prevents flooding of IP multicast traf

LLDP-MED (Media Endpoint Discovery)

defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones

PoE allocations

support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient
energy savings

Auto VLAN configuration for voice

RADIUS VLAN

uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones

CDPv2

uses CDPv2 to configure legacy IP phones

NEW Local MAC Authentication

assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Warranty and support

Lifetime Warranty 2.0

advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†

Electronic and telephone support (for Lifetime Warranty 2.0)

limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to

www.hp.com/networking/contact-support

; for details on the duration of support provided with your product purchase, refer

to

www.hp.com/networking/warrantysummary

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software

releases available with your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to
the Software license and hardware warranty statements at:

www.hp.com/networking/warranty

.

QuickSpecs

HP 3500 and 3500 yl Switch Series

Overview

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 6

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP 3500-24 Switch

J9470A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9470A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9470A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24-PoE Switch

J9471A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9471A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9471A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24G-PoE Yl Switch

J8692A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J8692A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J8692A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24G-PoE+ yl Switch

J9310A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 7

PDU Cable NA/MEX/TW/JP

J9310A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9310A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48 Switch

J9472A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9472A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9472A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48-PoE Switch

J9473A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9473A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9473A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48G-PoE yl Switch

J8693A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J8693A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J8693A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48G-PoE+ yl Switch

J9311A

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 8

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9311A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9311A#B2C

C15 PDU Jumper Cord (ROW)

Configuration Rules:

Note 1

The following Transceivers install into this Switch:
HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

Note 2

Localization required on orders without #B2B or #B2C options.

Remarks:

Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)

Factory Racked Models

HP 3500-48G-PoE+ yl Switch

J9311A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9311A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9311A#B2C

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 9

C15 PDU Jumper Cord (ROW)

HP 3500-24G-PoE+ yl Switch

J9310A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9310A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9310A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48G-PoE yl Switch

J8693A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J8693A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J8693A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24G-PoE Yl Switch

J8692A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 open module slot
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J8692A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J8692A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48-PoE Switch

J9473A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 10

PDU Cable NA/MEX/TW/JP

J9473A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9473A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24-PoE Switch

J9471A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9471A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9471A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-48 Switch

J9472A

44 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9472A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9472A#B2C

C15 PDU Jumper Cord (ROW)

HP 3500-24 Switch

J9470A

20 autosensing 10/100/1000 port
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1U - Height

See Configuration Note:1,

2

PDU Cable NA/MEX/TW/JP

J9470A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9470A#B2C

C15 PDU Jumper Cord (ROW)

Configuration Rules

Note 1

The following Transceivers install into this Module (Max=4):
HP X111 100M SFP LC FX Transceiver

J9054C

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 11

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

Note 2

If this switch is factory installed in HP Universal Racks, Then the J9583A or J9583A#0D1 is required.

EMEA then J9583A is required.
APD, Japan and China then J9583A#0D1 is required.

CLIC Only - Allow the J9583AZ in all regions.

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Modules

J9311A, J9310A, J8693A and J8692A only - System (std 0 // max=1) User Selection (min 0 / max=1) per
Chassis

HP 10 GbE 2-port X2 / 2-port CX4 yl Module

J8694A

min=0 \ max=2 X2 Transceivers

See Configuration Note:1

HP 10GbE 2-port SFP+/2-port CX4 yl Mod

J9312A

min=0 \ max=2 SFP+ Transceivers

See Configuration Note:2

Configuration Rules:

Note 1

The following Transceivers install into this Module:
HP X131 10G X2 SC SR Transceiver

J8436A

HP X131 10G X2 SC LR Transceiver

J8437A

HP X131 10G X2 SC ER Transceiver

J8438A

HP X131 10G X2 SC LRM Transceiver

J9144A

Note 2

The following Transceivers install into this Module:
HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 12

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

HP X242 SFP+ 10m DAC Cable

J9286B

HP X242 SFP+ 15m DAC Cable

J9287B

Transceivers

SFP Transceivers

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

SFP+ Transceivers

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 10G SFP+ SFP+ 1m DAC Cable

J9281B

HP X242 10G SFP+ SFP+ 3m DAC Cable

J9283B

HP X242 10G SFP+ SFP+ 7m DAC Cable

J9285B

HP X244 10G XFP SFP+ 1m DAC Cable

J9300A

HP X244 10G XFP SFP+ 3m DAC Cable

J9301A

HP X244 10G XFP SFP+ 5m DAC Cable

J9302A

HP X242 10G SFP+ 10m DAC Cable

J9286B

HP X242 10G SFP+ 15m DAC Cable

J9287B

X2 Transceivers

HP X131 10G X2 SC ER Transceiver

J8438A

HP X131 10G X2 SC LR Transceiver

J8437A

HP X131 10G X2 SC LRM Transceiver

J9144A

HP X131 10G X2 SC SR Transceiver

J8436A

Cables

Multi-Mode Cables

HP .5m Multi-mode OM3 LC/LC FC Cable

AJ833A

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 13

HP 1m Multi-mode OM3 LC/LC FC Cable

AJ834A

HP 2 m Multimode OM3 LC/LC FC Cable

AJ835A

HP 5 m Multimode OM3 LC/LC FC Cable

AJ836A

HP 15 m Multimode OM3 LC/LC FC Cable

AJ837A

HP 30 m Multimode OM3 LC/LC FC Cable

AJ838A

HP 50 m Multimode OM3 LC/LC FC Cable

AJ839A

HP Premier Flex LC/LC OM4 2f 1m Cbl

QK732A

HP Premier Flex LC/LC OM4 2f 2m Cbl

QK733A

HP Premier Flex LC/LC OM4 2f 5m Cbl

QK734A

HP Premier Flex LC/LC OM4 2f 15m Cbl

QK735A

HP Premier Flex LC/LC OM4 2f 30m Cbl

QK736A

HP Premier Flex LC/LC OM4 2f 50m Cbl

QK737A

Switch Enclosure Options

Rack Mount kits

HP X410 1U Univ 4-post Rack Mnt Kit

J9583A

See Configuration Note:1,

2

Rack Shelf

AB469A

See Configuration Note:3

Configuration Rules:

Note 1

Default with switch.

Note 2

If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount kit
must be ordered as BTO using supplier 8OCZ."

Note 3

This has existing rules that say 1 per 20 if 1U and 1 per 10 if its 3U or more. This rule is fine for ProCurve.

NOTE:

Both parts above are required to ship the 62xx Series Switches installed in a rack. Exceptions- The
Shelf Kit (AB469A) may be removed if the Switch is supported underneath by a full depth Server of 3U height
or greater mounted on fixed rails

Software

HP 3500 yl Premium License

J8993A

External Power supplies

HP 620 Redundant/External Power Supply

J8696A

Height = 1U

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 14

HP 630 Red and/or External Power Supply

J9443A

Height = 1U

See Configuration Note:1

Configuration Rules:

Note 1

See HPN Rack Menu for integration details.

QuickSpecs

HP 3500 and 3500 yl Switch Series

Configuration

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 15

HP 3500-48G-PoE+ yl
Switch

(J9311A)

I/O ports and slots

1 open module slot
44 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE-

T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

1 RJ-45 serial console port
4 dual-personality ports; each port can be used as either an RJ-45

10/100/1000 port (IEEE 802.3 Type 10BASE-T; IEEE 802.3u Type 100BASE­TX; IEEE 802.3ab 1000BASE-T Gigabit Ethernet) with PoE or an open
mini-GBIC slot (for use with mini-GBIC transceivers)

Supports a maximum of 4 10GbE ports, with optional module

Physical characteristics

Dimensions

17.44(w) x 16.93(d) x 1.73(h) in (44.3 x 43.0 x 4.4
cm) (1U height)

Weight

15.54 lb (7.05 kg)

Memory and processor

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM

Management Module

Stackable memory and processor: Freescale
PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB
compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only

Performance

1000 Mb Latency

< 3.4 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 111.5 million pps

Routing/Switching
capacity

149.8 Gb/s

Switch fabric speed

153.6 Gb/s

Routing table size

10000 entries (IPv4)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 32°F to 104°F (40°C)
when used with any SFP+ 10-GbE

Operating relative
humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 15,000 ft (4.6 km)

Acoustic

Power: 58.0 dB, Pressure: 42.0 dB ISO 7779, ISO
9296

Electrical characteristics

Frequency

50/60 Hz

Description

The switch automatically adjusts to any voltage
between 100-127 and 200-240 V with either 50 or
60 Hz.

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 16

Maximum heat
dissipation

1144 BTU/hr (1206.9 kJ/hr)

AC voltage

100-127/200-240 VAC

Current

7.3/3.3 A

Idle power

132 W

Maximum power rating

638 W

PoE power

398 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal
line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency
magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and
interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)

Notes

J8177B Gigabit 1000BASE-T mini-GBIC is not supported on the 3500 series
switches.
Supported 1G SFP transceivers are revision "B" or later (product number ends
with the letter "B" or later, for example, J9142B, J8177C).

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6319E)
3-year, 24x7 SW phone support, software updates (UE264E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR894E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR895E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR886E)
4-year, 24x7 SW phone support, software updates (UR887E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 17

(UR890E)
5-year, 24x7 SW phone support, software updates (UR891E)
3 Yr 6 hr Call-to-Repair Onsite (UW365E)
4 Yr 6 hr Call-to-Repair Onsite (UW366E)
5 Yr 6 hr Call-to-Repair Onsite (UW367E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR898E)
1-year, 24x7 software phone support, software updates (HR897E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR896E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS618E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS619E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS620E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS621E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS622E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS623E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS624E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS625E)

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP 3500-24G-PoE+ yl
Switch

(J9310A)

I/O ports and slots

20 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE­T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

1 RJ-45 serial console port
4 dual-personality ports; each port can be used as either an RJ-45

10/100/1000 port (IEEE 802.3 Type 10BASE-T; IEEE 802.3u Type 100BASE­TX; IEEE 802.3ab 1000BASE-T Gigabit Ethernet) with PoE or an open
mini-GBIC slot (for use with mini-GBIC transceivers)

1 open module slot
Supports a maximum of 4 10-GbE ports

Physical characteristics

Dimensions

17.44(w) x 15.43(d) x 1.73(h) in (44.3 x 39.2 x 4.4
cm) (1U height)

Weight

13.86 lb (6.29 kg)

Memory and processor

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM

Management Module

Stackable memory and processor: Freescale
PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB
compact flash, 256 MB DDR SDRAM

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 18

Mounting and enclosure

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only

Performance

1000 Mb Latency

< 3.4 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 75.7 million pps

Routing/Switching
capacity

101.8 Gb/s

Switch fabric speed

105.6 Gb/s

Routing table size

10000 entries (IPv4)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 32°F to 104°F (40°C)
when used with any X2 10-GbE

Operating relative
humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 90% @ 149°F (65°C), noncondensing

Altitude

up to 15,000 ft. (4.6 km)

Acoustic

Power: 57.0 dB, Pressure: 40.5 dB ISO 7779, ISO
9296

Electrical characteristics

Frequency

50 / 60 Hz

Description

The switch automatically adjusts to any voltage
between 100-127 and 200-240 V with either 50 or
60 Hz.

Maximum heat
dissipation

865 BTU/hr (912.9 kJ/hr)

AC voltage

100-127/200-240 VAC

Current

6.6 / 3.0 A

Idle power

94 W

Maximum power rating

616 W

PoE power

398 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal
line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 19

Power frequency
magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and
interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)

Notes

J8177B Gigabit 1000BASE-T mini-GBIC is not supported on the 3500 series
switches.
Supported 1G SFP transceivers are revision "B" or later (product number ends
with the letter "B" or later, for example, J9142B, J8177C).

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6304E)
3-year, 24x7 SW phone support, software updates (UE262E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR889E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR890E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR891E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR870E)
4-year, 24x7 SW phone support, software updates (UR871E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR874E)
5-year, 24x7 SW phone support, software updates (UR875E)
3 Yr 6 hr Call-to-Repair Onsite (UW356E)
4 Yr 6 hr Call-to-Repair Onsite (UW357E)
5 Yr 6 hr Call-to-Repair Onsite (UW358E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR893E)
1-year, 24x7 software phone support, software updates (HR892E)
1-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS610E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS611E)
3-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS612E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS613E)
4-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS614E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 20

Exchange (HS615E)
5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS616E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS617E)

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP 3500-48G-PoE yl
Switch

(J8693A)

I/O ports and slots

44 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE­T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10BASE-T; IEEE 802.3u Type 100BASE­TX; IEEE 802.3ab 1000BASE-T Gigabit Ethernet) with PoE or an open mini-GBIC
slot (for use with mini-GBIC transceivers)

1 open module slot
Supports a maximum of 4 10GbE ports, with optional module

Physical characteristics

Dimensions

17.44(w) x 16.93(d) x 1.73(h) in (44.3 x 43.0 x 4.4
cm) (1U height)

Weight

16.09 lb (7.3 kg)

Memory and processor

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM

Management Module

Stackable memory and processor: Freescale
PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB
compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only

Performance

1000 Mb Latency

< 3.4 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 111.5 million pps

Routing/Switching
capacity

149.8 Gb/s

Switch fabric speed

153.6 Gb/s

Routing table size

10000 entries (IPv4)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 32°F to 104°F (40°C)
when used with any X2 10-GbE

Operating relative
humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 21

Nonoperating/Storage
relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 15,000 ft (4.6 km)

Acoustic

Power: 55.6 dB, Pressure: 45.3 dB ISO 7779, ISO
9296

Electrical characteristics

Achieved Miercom Certified Green Award

Frequency

50/60 Hz

Description

The switch automatically adjusts to any voltage
between 100-127 and 200-240 V with either 50 or
60 Hz.

Maximum heat
dissipation

1144 BTU/hr (1206.9 kJ/hr)

AC voltage

100-127/200-240 VAC

Current

10.0/5.0 A

Idle power

142 W

Maximum power rating

705 W

PoE power

398 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal
line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency
magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and
interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)

Notes

J8177B Gigabit 1000BASE-T mini-GBIC is not supported on the 3500 series
switches.
Supported 1G SFP transceivers are revision "B" or later (product number ends
with the letter "B" or later, for example, J9142B, J8177C).

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (U6319E)
3-year, 24x7 SW phone support, software updates (UE264E)

QuickSpecs

HP 3500 and 3500 yl Switch Series

Technical Specifications

DA - 13282 Worldwide — Version 19 — December 9, 2013

Page 22