Hotpoint OS 897D P IX-HP, OS 897D P-HP User Manual

Operating Instructions

OVEN

English,1

OS 897D P/HP OS 897D P IX/HP

Contents

Installation, 2-3

Positioning Electrical connection Technical data

Description of the appliance, 4

Overall view Control panel Display

Oven structure, 5

Start-up and use, 6-13

Setting the clock Setting the timer ExtraLarge Space Small Space Main Space Using the Small Space and Main Space at the same time Programming cooking Practical cooking advice Cooking advice table for ovens with the ExtraLarge Space feature Cooking advice table for the Small Space feature Cooking advice table for the Main Space feature Cooking advice table for using the Small Space and Main Space at the same time

Precautions and tips, 14

General safety Disposal Respecting and conserving the environment

Care and maintenance, 15-16

Switching the appliance off Cleaning the appliance Cleaning the oven door Replacing the light bulb Automatic cleaning with the FAST CLEAN function

Guarantee, 19

After Sales Service, 20

Installation

560 mm.

45 mm.

! Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.

! Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance.

Positioning

! Keep all packaging material out of reach of children. It may present a choking or suffocation hazard (

see Precautions and tips

! The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.

Built-in appliance

Use a suitable cabinet to ensure that the appliance functions properly.

• The panels adjacent to the oven must be made of heat-resistant material.

• Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.

• To install the oven under the counter (

diagram

) or in a kitchen unit, the cabinet must

have the following dimensions:

see

Ventilation

To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (

see diagrams

Centring and fixing

Position the 4 tabs on the side of the oven so that they are aligned with the 4 holes on the outer frame. Adjust the tabs in accordance with the thickness of the cabinet side panel, as shown below:

20 mm thick: take off the removable part of the tab (

diagram

see

in.

547 mm. m

576 mm.

45 mm.

558 mm.

593 mm.

23 mm.

595 mm.

5 mm.

595 mm.

545 mm.

24 mm.

! The appliance must not come into contact with electrical parts once it has been installed. The indications for consumption given on the data plate have been calculated for this type of installation.

18 mm thick: use the first groove, which has already been set in the factory (

diagram

see

16 mm thick: use the second groove (

see diagram

Secure the appliance to the cabinet by opening the oven door and inserting 4 screws into the 4 holes on the outer frame.

! All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

Electrical connection

! Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (

Fitting the power supply cable

1. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover

see diagram

(

2. Install the power supply cable by

loosening the cable clamp screw and the three wire contact screws L-NConnect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire to the terminal

(

marked

3. Secure the cable by fastening the clamp screw.

4. Close the cover of the terminal board.

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate ( The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

! The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations. Before connecting the appliance to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with the law.

see diagram

see table

see below

• The socket can withstand the maximum power of the appliance, which is indicated on the data

see below

plate (

• The voltage is in the range between the values

indicated on the data plate (

• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced

by authorised technicians only (

The manufacturer declines any liability shouldThe manufacturer declines any liability should

The manufacturer declines any liability should

The manufacturer declines any liability shouldThe manufacturer declines any liability should

these safety measures not be observed.these safety measures not be observed.

these safety measures not be observed.

these safety measures not be observed.these safety measures not be observed.

see below

see Assistance

APPLIAN CE SPECI FI CATIONS

width 43. 4 cm

Dimensions

height 39.5 cm depth 40. 8 cm

olume 70 l

El ectrical connections

vol tage: 230 - 240 V~ 50Hz maximum power absorbed 3400-3 600W (see d ata pl ate)

Directiv e 200 2/40/ EC on th e label of electric ovens.

ENERGY LABEL

Standard EN 50304 Declared energy consumption fo r Forced convecti on Class – heati ng mode: Grati n.

Thi s appli anc e conforms to the

foll owing European Economic Communi ty di rectives : 2006/95/ EEC dated 12/12/06 (Low V olt age) and subsequent amendments – 2 004/ 108/EEC dated 15/ 12/04 (Electromagnetic Compatibility) and subsequent amendments 93/68/ EEC dated 22/ 07/93 and sub seq uent amendments. 2002/96/ EEC and subsequent amendments. 1275/200 8 Stand-by/ off mode

Description of the appliance

Overall view

DRIPPING PAN shelf

Control panel

DIVIDER shelf

RACK shelf

SMALL SPACE FUNCTION

knob

DISPLAY

SET TIMER

button

GUIDE RAILS

for the sliding racks

position 7 position 6 Divider "D" position

position 5 position 4

position 3 position 2 position 1

EXTRALARGE SPACE FUNCTION

knob

Display

MAIN SPACE

FUNCTION

knob

RECESS

SELECTED

TEMPERATURE and

TIME numerical digits

icon

¡•OC

•• ••

SELECT RECESS

button

¡•OC

•• ••

DURATION

icon

SET TEMPERATURE/TIMER

knob

DOOR LOCK

icon

TIMER icon

END OF COOKING

icon

Oven structure

The Openspace oven has a capacity of 70 litres and offers users the option of cooking on 4 shelves at the same time or cooking large quantities, which would not necessarily be possible in a traditional oven.

Thanks to the ExtraLarge Space, Openspace offers 10 cooking functions, 6 of which are universal and suitable for any type of cooking, while the remaining 4 are automatic programmes which can be used to achieve perfect results for any recipe. Openspace also offers maximum comfort for all requirements, with 4 different operating options: the oven is one large compartment but can be divided into separate spaces of various sizes, each with its

ExtraLarge Space: cooking on 4 shelf levels

RACK

EXTRALARGE

SPACE

RACK

RACK DRIPPING PAN

own independent temperature and duration controls. This is made possible thanks to the heat-insulating DIVIDER, which divides the whole ExtraLarge Space into two different-sized spaces: the Main Space and the Small Space. The two Main and Small Space compartments may be used at the same time to cook different dishes more quickly, or they may be used separately so that only the space necessary is used. When the two compartments are used at the same time, the cooking temperature of each may be adjusted to a value between 50° and 250°. There may be a difference in temperature of 100° between the two zones, which means it is possible to cook very different dishes without any flavours or aromas intermingling.

Main and Small Space: simultaneous operation

SMALL SPACE

MAIN

SPACE

RACK or DRIPPING PAN Divider "D" (fixed position)

RACK (cooking on 3 shelves) RACK (cooking on 3 shelves) DRIPPING PAN (cooking on 3 shelves)

Cooking using the Small Space only

SMALL SPACE

MAIN

SPACE

RACK or DRIPPING PAN Divider "D"

(fixed position)

The table below lists the possible temperature values which may be set. The intelligent display will

Temperature in the first cavity

(Main or Small Space)

Cooking using the Main Space only: cooking on 3 shelf levels

SMALL SPACE

MAIN

SPACE

Divider "D" (fixed position) RACK (cooking on 3 shelves) RACK (cooking on 3 shelves) DRIPPING PAN (cooking on 3 shelves)

guide you through the correct procedure used to adjust the temperature of the two recesses.

Temperature in the second cavity

(Small or Main Space)

Between 40°C and 150°C The temperature difference i n relati on to the first recess

sel ected is no greater than 50°C

For example: if you set one recess to 90°C,

ou may set a value of between 40 °C (90°C-50°C) and 140°C (90°C+50°C) for the other.

Between 155°C and 200°C The temperature difference i n relati on to the first recess

sel ected is no greater than 70°C

For example: if you set one recess to 180°C,

you may set a value of betw een 110°C (180°C-70°C) and 250 °C (180°C+70°C) for the other.

Between 205°C and 250°C The temperature difference i n relati on to the first recess

sel ected is no greater than 100°C

For example: if you set one recess to 210°C,

you may set a value of betw een 110°C (21 0°C-100°C) and 25 0°C (maximum tempera tur e sett ing) for the other.

To cancel any of the settings, simply turn the Small Space or Main Space function knob to the "0" position.

Start-up and use

! The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away. ! Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

! Always place cookware on the racks provided. ! During use, we suggest removing any crockery or

delicate foodstuffs from the recesses not in function. ! We suggest not opening the door when cooking foodstuffs which require leavening, so as to not compromise cooking results. ! If the door is subject to repeated jerking, the divider may come out of its housing. If this happens, the time will appear on the display. Make sure that the divider is correctly installed then restart cooking.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door. ! Once cooking is completed, the cooling fan activates and deactivates automatically until the oven has cooled down sufficiently.

Oven light

When the oven is not in operation, the lamp can be switched on at any time by opening the oven door.

Setting the clock

! This may only be set while the oven is switched off.

1. Press the button until the first numerical digit

flashes on the display and the , and icons are switched off.

2. Turn the TIMER KNOB towards “+” and “-” to adjust the hour value.

3. Press the numerical digits on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value.

5. Press the

button again so that the other two

button again to confirm.

Setting the timer

This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed.

1. Press the digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards “+” and “-” to adjust the minute value.

3. Press the The display will then show the time as it counts down. When this period of time has elapsed the buzzer will be activated.

button until the icon and the three

button again to confirm.

ExtraLarge Space

Starting the oven

1. Select the desired cooking function by turning the

EXTRALARGE SPACE FUNCTION knob. If the icon on the display is lit, this indicates that the ExtraLarge Space has been selected and therefore that only the settings corresponding to the ExtraLarge Space may be used.

2. The oven will begin its preheating stage. The temperature may be changed by turning the

TEMPERATURE knob. The during the pre-heating stage.

3. Once the pre-heating stage is completed, the icon stops flashing (becomes fixed) and a buzzer sounds. It is now possible to introduce foodstuffs into the oven.

4. During cooking it is always possible to:

- Change the cooking function by turning the EXTRALARGE SPACE FUNCTION knob.

- Adjust the temperature using the TEMPERATURE knob (for the universal cooking functions only).

- Set a duration (for universal cooking functions only) and the cooking end time.

- Stop cooking by turning the EXTRALARGE SPACE FUNCTION knob to the “0” position.

5. If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking function from the point at which it was interrupted, as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed.

indicator light flashes

+ 14 hidden pages