• Pre-Configured Kit means the room unit HCW80 and
relay module HC60NG are already teached-in
(bounded)
• Easy installation plug and play because the pre-
configuration
• Room unit HCW80 with simple analogue user interface
with absolute setpoint temperature scale 10-30°C and
frost protection symbol * 5°C
• HCW80 simulates mechanical thermostat function by
LED indication (ON/OFF)
• Limitation of adjustment range mechanical stop
• Indication of battery status LED flashing before
battery power is lost
• No programming
• Simple binding operation to reduce installation time
and costs only if single products are used
• RF communication check
GENERAL
The room unit HCW80 is used for intelligent room temperature
control in combination with the relay module HC60NG. It can be
used to control gas and oil boilers, variety of valves and
actuators or electrical heating systems. No wiring to the room
unit HCW80 is required.
Because of the simple HCW80 analogue user interface with
absolute setpoint temperature scale the room setpoint
temperature can be easily adjusted.
Reliable RF communication technology is used in the
868MHZ frequency band.
The HCW80 and HC60NG are already teached-in (pounded).
It is provided as Pre-Configured Kit for fast installation
plug and play.
SPECIFICATIONS HC60NG
ELECTRICAL
Electrical voltage supply : 230V ~ , 50HZ, +10%, -15%
Switch type : SPDT potential free
Output rating : 24-230V~, 10A, resistive,
inductive 0,6pf.
Wiring : Cable terminals for mains and
relay wiring for max. 2,5mm² wire
RF Communication
Frequency : 868,3 MHz Receiver
Receiver class : 2
RF communication range : 30m in a residential building
environment
RF communication : short, high rate transmission to
Technology minimize air time and avoid
collisions
ENVIRONMENTAL and STANDARDS
Storage temperature : -20 … +55 ºC
Operating temperature : 0 … +40 ºC when relay load <8A
0….+30 °C when relay load >8A
Dimensions (HxWxD) : 97 x 131 x 36 mm
Humidity : max. 0 … 90 % non condensing
IP class : IP30
Approval : CE
EN0B0553GE51R1205
SPECIFICATIONS HCW80
ELECTRICAL
Battery : 1,5 VDC, type LR06 AA
RF Communication
Frequency : 868,3 MHz Transmitter
RF communication range : 30m in a residential building
environment
RF communication : short, high rate transmission to
Technology minimize air time and avoid
collisions
ENVIRONMENTAL and STANDARDS
Storage temperature : -20 … +70 ºC
Operating temperature : 0 … +50
Dimensions (HxWxD) : 99 x 98 x 99 mm
Humidity : max. 5 … 90 % non condensing
IP class : IP30
Approval : CE
Application EXAMPLES
Application A
Boiler direct Control
Boiler direct Control
Zone 1
Zone 1
HCW80
HCW80
HCW80
HC60NG
HC60NG
HC60NG
Zone1 controls e.g. gas boiler
Zone1 controls e.g. gas boiler
Zone1 controls e.g. gas boiler
Boiler
Boiler
Boiler
Zone 1
Floor 2
Floor 2
Floor 2
Radiator
Radiator
Radiator
Control
Control
Control
Floor 1
Floor 1
Floor 1
Under Floor
Under Floor
Under Floor
Heating
Heating
Heating
The room unit HCW80 is sending the room
The room unit HCW80 is sending the room
temperature and room temperature setpoint
temperature and room temperature setpoint
to the relay module HC60NG.
to the relay module HC60NG.
Depending on the deviation of the room
Depending on the deviation of the room
temperature and room set point temperature
temperature and room set point temperature
the boiler will be switched On/Off.
the boiler will be switched On/Off.
Only one zone can be controlled with HCW80
Only one zone can be controlled with HCW80
without time program.
without time program.
EN0B0553GE51R1205
Application B
Underfloor Heating Control
HCW80
HCW80
HC60NG
HC60NG
Zone 1
Zone 1
Boiler
Boiler
Application C
Underfloor Heating and Radiator Control
Underfloor Heating and Radiator Control
Zone 2
Zone 2
Zone 2
HCW80
HCW80
HCW80
HCW80
HCW80
HCW80
Boiler
Boiler
Boiler
HC60NG
HC60NG
HC60NG
HC60NG
HC60NG
HC60NG
Zone 1
Zone 1
Zone 1
Floor 2
Floor 2
Radiator
Radiator
Control
Control
Floor 1
Floor 1
Under Floor
Under Floor
Heating
Heating
Floor 2
Floor 2
Floor 2
Radiator
Radiator
Radiator
Control
Control
Control
Floor 1
Floor 1
Floor 1
Under Floor Heating
Under Floor Heating
Under Floor Heating
Application for underfloor Heating control.
The room unit HCW80 is sending the room
temperature and room temperature setpoint
to the relay module HC60NG.
Depending on the deviation of the room
temperature and room set point temperature
the valve will be switched On/Off.
Only one zone can be controlled with HCW80
without time program.
Mixed application for radiator
Mixed application for radiator
Mixed application for radiator
and underfloor heating control.
and underfloor heating control.
and underfloor heating control.
The room unit HCW80 is sending
The room unit HCW80 is sending
The room unit HCW80 is sending
the room temperature and room
the room temperature and room
the room temperature and room
temperature setpoint
temperature setpoint
temperature setpoint
to the relay module HC60NG.
to the relay module HC60NG.
to the relay module HC60NG.
Depending on the deviation of the
Depending on the deviation of the
Depending on the deviation of the
room temperature and room set
room temperature and room set
room temperature and room set
point temperature valve will be
point temperature valve will be
point temperature valve will be
switched On/Off.
switched On/Off.
switched On/Off.
Only one zone can be controlled
Only one zone can be controlled
Only one zone can be controlled
without time program.
without time program.
without time program.
Each zone requires its own
Each zone requires its own
Each zone requires its own
HCW80
HCW80
HCW80
EN0B0553GE51R1205
Application D
Electrical Heating Control
Electrical Heating Control
Zone 1
HCW80
HCW80
Zone 1Zone 1
Zone 1Zone 1
Zone 1Zone 1
HC60NG
HC60NG
HC60NG
HC60NG
HC60NG
HC60NG
Heating device
Heating device
The room unit HCW80 is sending the room
The room unit HCW80 is sending the room
temperature and room temperature setpoint
temperature and room temperature setpoint
to the relay module HC60NG.
to the relay module HC60NG.
Depending on the deviation of the room
Depending on the deviation of the room
temperature and room set point temperature
temperature and room set point temperature
the relay will be switched On/Off.
the relay will be switched On/Off.
Only one zone can be controlled with
Only one zone can be controlled with
HCW80 without time program.
HCW80 without time program.
Zone1 controls several elect r i cal
Zone1 controls several elect r i cal
Heating devices