Honeywell W7215B Catalog Page
Economizer Logic Modules
70-6910 405
Commercial
Components
PC Interface Module
Digital economizer controller for programming and remote fault
detection and diagnostics
Dimensions, Approximate: 4.98 in. high x 6.3 in. wide x 1.34 in. deep
(126.4 mm high x 160 mm wide x 34mm deep)
Voltag e: 12-30 VAC
(powered by Jade controller)
Frequency: 60 Hz/50Hz
Operating Temperature Range: -40 F to -150 F (-40 C to +65 C)
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Approvals
Federal Communications Commission: Compliant
Underwriters Laboratories, Inc: Flammability Rating UL94V-5V
Other Agencies: Complies with California Title 24
W7215B Enhanced Economizer Logic Modules
Use with C7400A, or C7660 and C7150B or C7046 Sensors; Demand
Control Ventilation (DCV) sensor C7232 C02 sensor (2-10 Vdc); and
Honeywell Series 72 actuators to proportion outdoor and return air
dampers for economizer and ventilation control in commercial HVAC
equipment. (See below)
• Input from DCV C02 sensor provides optimum ventilation
based on occupancy
• Includes air change and shutdown
• Demand control ventilation economizer provides comfort,
energy savings, reliability, air quality compliance and
flex bility in heating, cooling and ventilating applications
• Combines enthalpy or dry bu b changeover control, minimum and maximum
damper position potentiometer and DCV setpoint functions
• Optional differential enthalpy control (enthalpy setpoint D with two C7400A
sensors) provides greater economizer savings and maximum comfort over
single enthalpy control
• Enthalpy setpoint (A-D) on economizer module controls the combination of
air temperature and humidity that is suitable for free cooling
• LEDs indicates when economizer is in free cooling and DCV modes
• Provides for input from an outdoor air quality sensor
Dimensions, Approximate: 8 11/16 in. high x 5 13/16 in. wide x 1 11/16 in.
deep (221 mm high x 147 mm wide x 43 mm deep)
Contact Ratings: 1.5 A Run @ 30 Vac; 3.5 A Inrush @ 30 Vac
Voltag e: 24 Vac
Frequency: 50 Hz; 60 Hz
Operating Temperature Range: -25 F to +125 F (-32 C to +52 C)
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Used With: Honeywell Series 72 actuators
Approvals
CE: CE Report: GV02-003
C-Tick: Approved
Underwriters Laboratories, Inc: UL Listed File: E4436, Guide: XAPX,
Meets UL873 plenum requirements
Other Agencies: Complies with California Title 24
Accessories:
4074EJM-1.2K ohm checkout resistor, 620 ohm resistor, and jumper
S963B1128-Manual Potentiometer (135 ohm)
Product Number Input Output Color Description
W7220-PCMOD/U Sylk bus communication
to JADE (W7220A1000)
USB connection to a
personal computer
Gray W7220-PCMOD interface module used with
JADE (W7220A1000) and Personal Computer
Product Number Input Output Use with Sensor Comments
W7215B1004/U Discharge Air Temperature
sensor: C7150 or C7046;
Air Quality Sensor
2-10 Vdc to
actuator
C7232; C7400A;
C7150; C7046;
C7660
Can accept remote minimum position damper position potentiometer
and/or analog input from two carbon dioxide sensors for indoor and
outdoor air.Economizer Logic Module operates Series 72 actuators
Loading...