Pneumatic Valves
VP527 Pneumatic Water Valve
Dimensions in inches (millimeters)
AIR CONNECTION |
|
|
|
FOR 1/4 IN. (6 MM) |
2-1/4 (57) DIA. |
1 |
|
O.D. PLASTIC TUBING |
|||
|
|
||
|
|
1-1/2 |
|
|
|
(38) |
|
|
|
3-13/16 |
|
|
|
(97) |
|
|
|
1-5/8 |
|
|
|
(41) |
|
|
1-3/8 |
|
|
|
(35) |
|
|
2 |
3-1/8 (79) |
2 |
1/2 IN. (12MM) X 45 SAE FLARED TUBE CONNECTION - 2 (NOT FURNISHED)
1ALLOW 1-1/2 IN. (38 MM) MINIMUM CLEARANCE TO SERVICE VALVE, 2-1/2 IN. (63 MM) CLEARANCE TO CONNECT TUBING STRAIGHT TO CONNECTOR. IF CLEARANCE IS LESS THAN 2-1/2 IN. (63 MM),
USE AN ELBOW CONNECTOR.
2ALLOW 1-3/8 IN. (35 MM) MINIMUM CLEARANCE TO REMOVE VALVE.
M18348A
Normally open, single-seated, high pressure valve provides proportional control of hot and/or cold water in unit air conditioners and fan coil units. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell devices.
•Small size permits installation where space is limited.
•Forged brass, straight-through body with end connections threaded for 45 degrees SAE flare fitting nuts.
•Spring-loaded, self-adjusting, Buna-N “V”-ring packing is replaceable without shutting system down.
•High-temperature rolling diaphragm actuator (aluminum cover) and high-temperature plastic diaphragm retaining cup with integral air connection for 1/4 in. (6 mm) O.D. plastic tubing.
•Integral seat and brass plug with removable composition disc provides equal percentage flow.
•Stainless steel stem, 3/16 in. (5 mm) diameter.
Valve Type: Unitary Body Pattern: Two-way
Body Pressure: 250 psi (1724 kPa)
Air Connections: Push on for 1/4 in. O.D. plastic tubing Valve Action: Proportional Normally Open
Controlled Medium: Water
Type of End Connection: 45 degree. SAE flare Operating Humidity Range (% RH): 5 to 95% RH
Temperature Range: 35 F to 250 F (2 C to 121 C)
Maximum Safe Actuator Diaphragm Temperature: 230 F (110 C) Maximum Diaphragm Pressure: 30 psi (205 kPa)
Accessories:
14003648-001-Vandalism Resistant Assembly, Cover assembly with 1/8 in NPT air Connection and push-in retainer to replace standard Cover 14004932-001-Pneumatic Valve Adapter (M6410/M7410 linkage and a
green main spring to allow to retrofit an electric actuator)
Replacement Parts:
14001046-004-Cover fastener for VP525A,C; VP526A; VP527A; or VP531A,C
14003102-001-Replacement top assembly
14003297-001-Valve repack kit for VP526A, VP527A, or VP531A valves with 3/16 inch stem
14003475-001-Valve Rebuild Kit for 1/2 in. valve with 0.4 or 0.63 Cv 14003476-001-Valve Rebuild Kit for 1/2 in. valve with 1 or 1.6 Cv 315917-Diaphragm
|
|
|
|
|
|
|
|
|
End Connection Size |
Capacity |
|
Close-off Ratings at |
Spring Range |
|
|
|
|
|
|
|
Branch Line |
|
|
Product Number |
(inch) |
(mm) |
(Cv) |
(Kv) |
Pressure |
(psi) |
(kPa) |
|
|
|
|
|
|
|
|
VP527A1018/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
0.63 Cv |
0.54 Kv |
130 psid at 13 psi |
3 psi to 10 psi |
21 kPa to 69 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
VP527A1026/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
1.0 Cv |
0.86 Kv |
45 psid at 13 psi |
3 psi to 10 psi |
21 kPa to 69 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
VP527A1034/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
1.6 Cv |
1.38 Kv |
45 psid at 13 psi |
3 psi to 10 psi |
21 kPa to 69 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
VP527A1059/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
0.63 Cv |
0.54 Kv |
130 psid at 8 psi |
2 psi to 5 psi |
14 kPa to 34 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
VP527A1067/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
1.0 Cv |
0.86 Kv |
45 psid at 8 psi |
2 psi to 5 psi |
14 kPa to 34 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
VP527A1075/U |
O.D.: 1/2 in.; |
O.D.: 12.7 mm; |
1.6 Cv |
1.38 Kv |
45 psid at 8 psi |
2 psi to 5 psi |
14 kPa to 34 kPa |
|
Nominal: 3/8 in. |
Nominal: 9.5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
722 |
customer.honeywell.com |
70-6910 |