Honeywell T7526, T7525 User Manual
T7525/T7526 Thermostat Touchpad
User Guide
Total H me
RC24
®
PERFECT
CLIMATE
Copyright © 1995 Honeywell Inc. • All Rights Reserved
69-0860-1
T7525/T7526 THERMOSTAT TOUCHPAD
69-0860—1
T7525/T7526 THERMOSTAT TOUCHPAD
CONTENTS
What You Can Do
Using the Touchpad ........................................................................................................................... 1
Touchpad Screens ........................................................................................................................... 1
Temperature Control Functions ........................................................................................................................... 3
Temporarily Change the Setpoint Temperature Using
T7525A/T7526A Thermostat Touchpads (Manual Changeover) ..................... 3
Temporarily Change the Setpoint Temperature Using
T7525C/T7526C Thermostat Touchpads (Auto Changeover)......................... 4
Hold the Temperature ......................................................................................... 5
Cancel the Temperature Hold ............................................................................. 5
Change the Program Setpoint Temperatures...................................................... 6
Change the Time a Period Starts........................................................................ 7
Change the Operating Mode of Heating/Cooling Equipment ............................... 8
Change the Operating Mode of Ventilation Equipment........................................ 9
Change the Time and Day.................................................................................. 10
i
69-0860—1
T7525/T7526 THERMOSTAT TOUCHPAD
69-0860—1
TOUCHPAD SCREENS
T7525/T7526 THERMOSTAT TOUCHPAD
WHAT YOU CAN DO USING THE TOUCHPAD
Using the T7525/T7526 Thermostat Touchpad, you can easily adjust your energy
management heating/cooling system to keep your home comfortable, and at the same
time, conserve energy and lower your utility bills. Do this by using the following Easy-to
use™ functions programmed into the Touchpad:
• Hold Temperature—you can maintain a temperature until you manually cancel it.
• Settings and Schedules—you can:
— Change the setpoint temperature.
— Change the daily schedules.
• Heat/Cool Equipment—you can:
— Switch the system to HEAT, COOL, or OFF.
— Switch the fan to ON or AUTO.
•Ventilation—you can switch the fan to ON or AUTO.
• Present Time/Day—you can change the time and day.
TOUCHPAD SCREENS
o
Set: C: 80
Actual: 80
Rate: NORMAL
12:25PM Mon
o
SOFT KEYS
Options
Hold Temperature
C = COOLING SETPOINT
H = HEATING SETPOINT
Warmer
Cooler
Options
Next
More
TEXT DETERMINED
BY UTILITY
Select
Back
UTILITY OPTIONS LINES
Select
Back
M4467
M4468
The Base screen displays automatically after two minutes of inactivity at the Touchpad.
Backlighting is activated by pressing any key on the Touchpad. See the Backlighting
section for more information on backlighting.
Other screens display depending on which keys are pressed (Select, Back, or soft
keys).
The Touchpad will notify you when certain faults occur in your heating and cooling
system through messages displayed on the first line of the screen. Once the fault is
corrected, the fault message is automatically removed and the programmed text is
restored on the first line of the screen.
If the Touchpad is connected to a gateway utility, programmed utility options are
displayed on the top two lines of the first Options menu.
1
69-0860—1
Loading...