Honeywell M6284, M6294 Catalog Page
Modutrol IV Motors
M6284; M6294 Floating Modutrol IV™ Series 2 Motors,
for Slaving Applications only
These Series 62 Modutrol IV™ Motors non-spring return floating
control motors are used with controllers that provide a switched
spdt or floating output to operate dampers or valves. These motors
also have an internal electrically isolated feedback potentiometer
that provides indication of the motor shaft position. Some models
can be used for slaving Series 90 Motors.
• Integral junction box provides NEMA 3 weather protection
if motor is mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard--screw terminal adapter is available
• Adapter bracket for matching shaft height of older motors is available
• Motors have field adjustable stroke (90 to 160 degrees)
• Integral auxiliary switches are available factory mounted, or can be field added
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
• Motors are designed for either normally open or
normally closed valves and dampers
• Include electrically isolated feedback potentiometer that
provides shaft position indication
• -S models with non-linear feedback are for slaving applications only
Application Type: Electric
Dimensions, Approximate: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Fail Safe Mode: Non-Spring Return
Control Signal: Floating
Feedback: Ye s
Frequency: 50 Hz; 60 Hz
External Auxiliary Switches Available: Ye s
Auxiliary Switch Ratings AFL - 120 Vac: 7.2A
Auxiliary Switch Ratings ALR - 120 Vac: 43.2A
Auxiliary Switch Ratings AFL - 240 Vac: 3.6A
Auxiliary Switch Ratings ALR - 240 Vac: 21.6A
Mounting: Foot-mounted; Dual-ended shaft
Motor Shafts: Dual-ended shaft
Shaft Shape: square
Shaft Dimensions: 0.375 in. (10 mm)
Shaft Rotation (upon control signal increase): Dependent on wiring
(normally closed)
Deadweight Load on Shaft (Either End): 200 lbs.
Deadweight Load (Combined on both Shafts): 300 lbs.
Ambient Temperature Range: -40 F to +150 F (-40 C to +60 C)
Weight: 7.5 lb
Comments:
non-linear feedback, for slaving applications only
Approvals
CE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Underwriters Laboratories, Inc: Listed: File No. E4436, Guide No.
XAPX for USA and Canada
Accessories:
4074ERU-Weatherproofing kit. Protects motor from driving rain when
mounted in any position
220736A-Internal Auxiliary Switch Assembly - 1 Switch
220736B-Internal Auxiliary Switch Assembly - 2 Switches
220738A-Adapter Bracket. Adjusts shaft height to match Modutrol III motors
220741A2-62-Screw Terminal Adapter Kit for Series 62 Series Modutrol IV
Series 2 motors- Converts quick-connect terminals to screw terminals
221455A-Infinitely adjustable Motor Crank Arm
50017460-001-24/120/230 Vac Internal Transformers for Series 2 and 3
Motors
50017460-003-120 Vac Internal Transformers for Series 2 and 3 Motors
Torque/Force
Product Number
M6284A1055-S/U 150 lb-in. 17 Nm 120V 30-60 sec Quick-connect
M6284A1071-S/U 150 lb-in. 17 Nm 120V 30-60 sec Screw terminals 0 90
* M6284D1000-S/U 150 lb-in. 17 Nm 24V 30-60 sec Quick-connect
* M6284D1026-S/U 150 lb-in. 17 Nm 24V 30-60 sec Quick-connect
* M6284D4004-S/U 150 lb-in. 17 Nm 24V 30-60 sec Quick-connect
M6284F1013-S/U 150 lb-in. 17 Nm 24V 30-60 sec Quick-connect
* M6294D1008-S/U 300 lb-in. 34 Nm 24V 120-240
* TRADELINE models • SUPER TRADELINE models
Vo lt ag e
Nominal
Timing
(sec)
sec
Electrical
Connections
terminals
terminals
terminals
terminals
terminals
Quick-connect
terminals
Internal
Auxiliary
Switch
0 90
0 160
0 90
0 160
2 160
0 160
Factory
Stroke
Setting Stroke Includes
degrees
degrees
degrees
degrees
degrees
degrees
degrees
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees, Symmetrical
Adjustable; 90 to 160
degrees
Transformer 50004263-003
Transformer 50004263-002
Slave with Series
90 Motors
220741A2-62
Screw Terminal
Adapter Kit
— None
— None
— None
Internal
Transformerlb-in., lb Nm, N
None
None
420 customer.honeywell.com 70-6910
Loading...