The Impact range of portable multi-gas
monitors is able to monitor and display
up to four gases simultaneously
Lumidor Impact & Impact Pro
The Impact range of portable multi-gas
monitors is able to monitor and display up
to four gases simultaneously. Using high
specification flammable, oxygen and
patented Surecell™ toxic sensors, our
unique cartridge technology ensures safe,
accurate and reliable measurements are
always made.
Available in two configurations, the Impact and
Impact Pro accepts either disposable and/or
serviceable cartridges respectively, all of which are
pre-calibrated and can be replaced in under one
minute, so simplifying maintenance and minimizing
cost wherever possible. Compact and rugged
these monitors are designed for tough working
environments while being small, lightweight and
unobtrusive, making them ideal for use in confined
spaces where entry and exit may be difficult.
Designed to work how you want to; gas checks
prior to entering a confined space can be carried
out using a drop line, hand aspirator or via an
optional built-in pump (supplied as standard on
the Impact Pro) that turns on and off automatically
when the sampling tube is connected.
Ultra-bright alarm lights and a powerful audible
alarm, coupled with a periodic green flash and
bleep provide user confidence that monitoring is
always in operation and alarms are never missed.
For noisy environments a vibrating alarm is included
as standard on the Impact Pro. A large, multilingual, backlit display, with intuitive menu system
simplifies use and minimizes operator training.
Available for use with a wide range of accessories
including the unique Enforcer calibration system
and compliance friendly Safelink communication
system, you can be sure that the Impact range of
portable multi-gas monitors will be ready to protect
you when most needed.
Reliable Operation
• Pre-calibrated plug-in sensor cartridge
• High specification sensors
• Patented Surecell™ toxic sensors
• Stable and accurate
Easy to Use
• One button on/off
• Multi-lingual, intuitive menu system
• On screen prompts guide user
• Built-in correction factors for flammable gases
• Minimal training required
Easy to Maintain
• Plug-in operation for all serviceable parts
• Cartridge replacement in less than one minute
• Re-calibration in less than two minutes when
using Enforcer
• Minimized cost of ownership
Durable Housing
• Waterproof to IP67
• Rugged and impact resistant
• Built for everyday use
Alarm Indication
• 3 levels of instantaneous alarm, time weighted
average alarms on toxic
• Periodic confidence flash and bleep
• Increasingly rapid flashing, ultra-bright alarm LEDs
• Powerful two tone audible alarm
• Vibrating alarm for noisy environments*
• Safelink communications*
User Friendly Pre-entry Check
• Peak hold function and drop line
• Hand aspiration
• Built-in automatic pump*
• Totally flexible
*Impact Pro model only
Impact
Personal multi-gas monitors
IP67
RATED
General Specification
General Specification
Use Portable multi-gas monitor for the protection of personnel from up to four hazardous gases in the working environment.
Available to detect# Flammable, Oxygen, Carbon Monoxide, Hydrogen Sulfide, Sulfur Dioxide, Chlorine, Nitrogen Dioxide, Ammonia, Carbon Dioxide.
User interface Ultra clear, backlit, alphanumeric display. Intuitive push button menu system with user selectable operation in English, French,
Configuration and data download Supplied configured, ready to use including black box data-logging as standard. Configurable via optional PC software and base
Construction Impact resistant plastic, anti-static to EN50014.
Dimensions 49mm x 84mm x 136mm (1.9" x 3.3" x 5.3").
Weight Maximum 520g (18oz) including rechargeable battery and optional pump.
IP rating Instrument IP67 (NEMA 4 & 6).
Operating temperature# -20°C to +55°C (-4°F to +131°F).
Storage temperature# Instrument -40°C to +80°C (-40°F to +176°F).
Humidity range# Continuous 20 to 90%RH. Intermittent 0-99%RH non-condensing.
Alarms 3 levels of instantaneous alarm per channel. Time weighted average alarms on toxic channels.
Audible alarm Periodic confidence bleep with differing dual tone for fault, gas alarm and warning rated 85dBA at 1m (90dBA at 1ft).
Visual alarm Green confidence flash with rapid red flashing for fault, gas alarm and warning indication.
Battery performance Ni-MH rechargeable, operating life > 10 hours (Charging time 7 hours). Dry cell disposable > 17 hours. Nominal reduction of
Optional pump Supplied as standard with Impact Pro. Typical flow rate 0.3l/min.
Approvals USA: Class 1, Div 1, Groups A, B, C, D (UL).
Canada: Class 1, Div 1, Groups A, B, C, D (CSA).
Marine: Marine Equipment Directive MED 96/98/EC.
German, Italian, Spanish and Dutch. Other languages available upon request.
station for control of logging functions and data download.
Supplied pre-set (user configurable via optional PC software and base station).
10% when used with pump.
Automatic start/stop feature with auto-test on start-up and flow fail alarm.
Standard supply Each instrument is supplied complete with quick start guide, multi-lingual operating instructions on CD, dry cell battery holders
and batteries, belt clip and flow adaptor. Fully configured and ready to accept either disposable or serviceable sensor cartridges
the key considerations in selecting either the Impact or Impact Pro are highlighted below.
Impact Impact Pro
Cartridge type# Disposable only Disposable or Serviceable
Integral pump/pump adaptor No Yes
Vibrating alarm No Yes
Safelink No Yes
Ordering information
e.g. 2302B2000 9 U E = 2302B20009UE
TYPE
8 Impact
9 Impact Pro
CERTIFICATION
U USA UL
Canada CSA
Disposable or serviceable sensor cartridge
must be ordered separately#.
Optional accessories A wide range of optional accessories are available including:
Base station and Impact Configuration Utility (required for data download and configuration).
Rechargeable NiMH batteries for use with base station or offline charger.
Enforcer calibration system.
Safelink communication system.
Pre-entry sample probes including hand aspirator, 1m probe, tubing and ball float.
Body harness and harness clip offering alternate mounting arrangements.
Field case for housing of all accessories as required.
#
Refer to cartridge datasheet for gas specific data.
LANGUAGE
E English*
F French
G German
I Italian
S Spanish
D Dutch
*Default
* Oxygen detection products must only be used to detect oxygen depletion in air.
H_IMPRO-DS_Rev 1
09/05
© 2005 Honeywell Analytics
As World leaders in gas detection solutions, Honeywell Analytics’
Lumidor range is best placed to provide the most efficient, practical
and cost-effective equipment. Wherever personal protection
is required, you can rely on our equipment to provide practical
solutions and to help keep your business running safely.
MicroMAX Pro MicroMAX + MicroMAX PID Minimax XT Minimax XP Minimax X4
The Lumidor range of portable gas detection
MicroMAX range
With lifetime warranties*, the MicroMAX range offers the most robust microprocessor
controlled multi-gas monitors available. Providing all the personal gas protection features
you require, MicroMAX monitors can handle the very toughest working conditions.
*
Lifetime warranty excludes sensors, batteries and pump.
Minimax range
The Minimax range provides personal single and multi-gas protection and operational compliance
in industrial environments. They are ideal for people working in areas that are not easily accessible
and/or where fixed detection systems are not installed or not practical.
Impact and Impact Pro are ideal for providing personal protection against gases in tough environments,
especially in confined spaces where entry and exit may be difficult. The Impact range provides easy
and economical means of personal gas detection to meet compliance requirements. The Safelink
Entrant/Attendant function ensures safe working practices are followed.
Impact and Impact Pro
Safelink adds an extra safety
dimension, enabling two-way
communication in difficult areas.
Easy to use, the system links two
Impact Pro multi-gas monitors
together, allowing a co-worker
in a confined space to be
monitored remotely, as well
as providing a way of
exchanging messages.
The Enforcer helps you to
easily (and cost-effectively)
comply with regulations
requiring the regular testing
of instruments. Because it can
calibrate Impact multi-gas
monitors within less than two
minutes, the instruments are
always ready for use. It also
reduces cost by avoiding the
need for specialist knowledge
and equipment,
or sub-contracting to
expensive third parties,
which also adds delays.
Enforcer Safelink
10722
Find out more
www.honeywellanalytics.com
Customer business centre
Europe and the rest of the world
Honeywell Analytics AG
Wilstrasse 11-U11
CH-8610 Uster
Switzerland
Tel: +41 (0)44 943 4300
Fax: +41 (0)44 943 4398
sales@zelana.co.uk
Customer business center
A
mericas
Honeywell Analytics Distribution, Inc.
400 Sawgrass Corporate Pkwy
Suite 100
Sunrise, FL 33325
USA
Tel: +1 954 514 2700
Toll free: +1 800 538 0363
Fax: +1 954 514 2784
sales@zelana.com
www.honeywell.com
Please Note:
While every effort has been made to ensure
accuracy in this publication, no responsibility
can be accepted for errors or omissions.
Data may change, as well as legislation, and you
are strongly advised to obtain copies of the most
recently issued regulations, standards, and guidelines.
This publication is not intended to form the
basis of a contract.
© 2005 Honeywell Analytics
Loading...