HCM 200D
ZONING MANAGER
PRODUCT DATA
GENERAL
The Zoning Manager HCM 200D is designed to provide home
automation control. HCM 200D includes both, the 433 MHZ
and 868 MHZ transceiver. This provides backward compatibility to all 433 MHz components within the Hometronic family
and capabilities to control radiator controllers such as HR 80
and further products based on 868 MHZ technology. Due to
the modular design and architecture, the HCM 200D can be
configured and upgraded according to individual customer
requirements. It covers a wide range of applications in terms
of:
• Comfort
Individual room temperature control for radiators and
under floor heating.
• Convenience
Shutter, lighting control, appliance and cooling control.
• Security and safety
Presence simulation, alarm messages, and sensor contact
detection.
Remote access is possible via phone (internet on request).
The HCM 200D user interface is the same as the
HCM 200. The programming philosophy combined with the
operation keys makes this product easy to program and use.
FEATURES
• Usable for upgrading CM Zone applications to expand
individual room temperature control for up to 16 zones
• 433 MHZ and 868 MHZ reliable RF communication
utilizing 868 MHZ band with 1% duty cycle limit to
minimize communication disturbance
• High performance:
- Up to 1600 switching points
- 16 lifestyles with 400 actions
- 32 modules for shutter, lighting and appliance control
- Up to 16 allocatable sensors
- Upgradeable software via download
• User friendly interface:
- backlit display (4 lines, 20 characters)
- dial button (turn/press)
- ECO and Auto/Manu button
- dedicated life style buttons
• Individual room temperature control for up to 16
different zones (rooms) with radiator and under floor
heating control
• Heating/Cooling functionality
• Full integration of HR80 functionalities:
- Local operation lock disables manual overwrite HR 80
optimization
- Set point limit min.
- Set point limit max.
• Window function (set point will be changed if the window
is open/closed)
• Boiler feedback dependent on the set point and on the
valve position (HR80 only)
• Analog output for boiler feedback
(MCR36/40/200/ZGxx)
• Individual shutter and awning control dependent on
the time program, brightness and room/outside
temperature
• Individual lighting control dimming function
• Security and safety functions:
- Presence simulation
- Detection of sensor contact (water leakage)
- Alarm messages sending via phone
• Appliance control switch ON/OFF electrical devices
• Water stop control
EN0H-0482GE51 R1004
HCM 200D
SPECIFICATIONS
Operating voltage 2 V AC/DC
Power consumption 4 VA
Batteries 3 x size AA, Micro 1.5 V
Battery replacement Program retained in EEPROM
Dimensions (HxWD) 170 x 127 x 40 mm
Display Backlit ( 4 lines, 20 characters
per line)
Operating temperature to 40 °C
Shipping and storing
Temperature -20 to +70 °C
Humidity 5 to 93 %, non condensing
IP class IP30
Safety class 2
Approval CE, countries outside EU
require country specific RF
approval
RF communication range max. 30 m in a residential
building environment rage
RF operation band LPD (868.0 – 868.6) MHZ,
1 % duty cycle
ISM 433 MHZ (433.150 –
434,700) 10 % duty cycle
Receiver Class 2
APPLICATION EXAMPLES
Application overview for Heating, Convenience and Communication
based on 868MHZ and 433MHZ
433MHZ
Telecom
Network
Communication
HCI300
Internet
HR50
HCU30
433MHZ
HCW22
HCF22
HCE60
HCM200D
Heating Control
• HCM200D includes transceiver
868MHZ + 433MHZ
• HCM200 D is communicating with
HR80 and future 868MHZ devices.
• Backward compatible with all 433MHZ
devices within the 433MHZ Hometronic
family.
HRD20
HS20
HA70
HR80
868MHZ
HC60NG
Convenience
433MHZ
HA30
HD30
HS30
HX10
HB05
HB15
HWS40
EN0H-0482GE51 R1004
2
HCM 200D
Heating application for Under Floor Heating
and Radiator Control based on 868MHZ and 433MHZ
Zoning Manager
HCM 200D
868MHZ / 433MHZ
HR 50
433MHZ
HR 80
868MHZ
Under floor heating
controller HCE 60
Remote set point
HCW 22
Remote set point
Remote set point HCU 30
with time program
HCW 23
Room sensor
HCF 22
Antenna
HRA 1
Optional Boiler feedback with boiler relay and analogue output (TW)
CM Zone mixed applications for Under Floor Heating
and Radiator Control based on 868MHZ
Floor xx
Radiator
Control
Floor 2
Radiator
Control
Floor 1
Under Floor Heating
Optional
HC60NG
CM67z
HR80
HR80
HC60NG
Zone 1
Boiler feedback signal
HCM200D
Zone 1 to 16
a
n
o
i
t
c
e
r
i
d
i
B
R
H
n
e
e
w
t
e
B
Zone 2
m
m
o
c
l
d
n
a
0
8
c
i
n
u
C
H
HCM200D
868MHZ
n
o
i
t
a
D
0
0
2
M
l
a
n
g
i
s
k
c
a
b
d
e
e
f
r
e
l
i
o
B
433MHZ
Mixed application for underfloor
heating control and enhanced
radiator applications with
D
0
0
zoning manager HCM200D up to
2
M
16 zones.
C
H
The underfloor can be controlled
only with the zone 1 of CM67z
because it includes the room
sensor and controls HC60NG for
Zone1. Zone 2 controls HR80
but alternatively it can be also
controlled from HCM200D. The
boiler inter lock signal is generated
by the CM67z for the zone1 and
for zone 2 zone from each radiator
controller HR80. However the
boiler demand signal is also
generated by the HCM200D
depending on the heating request
of each installed room (zone). The
boiler relay HC60NG is controlled
by the CM67z and HCM200D
based on heating demand of the
individual zones.
Zone 1 can be controlled only
with CM67z because PWM
control of the HC60NG
3 EN0H-0482GE51 R1004
HCM 200D
Enhancement of existing applications
HCM200D
for Radiator Control based on 868MHZ
Floor xx
Radiator
Control
Floor 2
Radiator
Control
Floor 1
Radiator
Control
optional
HC60NG
CM67z
HR80
HR80
HR80
Boiler feedback signal
HCM200D
Zone 16
Zone 3
Zone 2
Zone 1
l
a
.
.
n
g
i
s
k
c
a
b
d
e
e
f
r
e
l
i
o
B
868MHZ
433MHZ
Enhancement of existing CM Zone
applications with zoning manager
HCM200D for radiator control.
D
CM67z will be replaced with
0
0
2
HCM200D. Up to 16 zones can be
M
C
controlled individual. The boiler
H
inter lock signal is generated by
the HCM200D. Depending on the
heating request of each zone the
boiler will be controlled via the
relay module HC60NG.
Up to 4 HCM200D can send their
heating demand signal to the
HC60NG.
However it can be also a mix
between HCM200D and CM67z
where the boiler demand signal will
be sent to one HC60NG. The
limitation is max. 4 controller can
communicate to one boiler relay.
Radiator control with product mix existing HR50
and HR80 based on 868MHZ and 433MHZ
Floor xx
Radiator
Control
Floor 2
Radiator
Control
Floor 1
Radiator
Control
optional
HC60NG
HR80
HR50
HR50
Boiler feedback signal
HCM200D
Zone 16
.
.
Zone 3
Zone 2
Zone 1
HCM200D
868MHZ
433MHZ
l
a
n
g
i
s
Enhancement of existing
k
c
applications for radiator control
a
b
d
with HR50 and HR80.
D
e
0
e
0
f
The HCM200D can control still
2
r
e
M
l
HR50 and the application can be
i
C
o
H
mixed up with HR80.
B
The boiler inter lock signal is
generated by the HCM200D.
However the HC60NG will be
controlled depending on the valve
position (HR80 only).
The boiler feed back for the HR50
is based on the set points and can
control the relay module HS30 or
HS20.
Recommendation: If HR50 and
HR80 is used in one application
and boiler feed back is required
than it should be a separate
heating circuit for the HR50 and
HR80. In case only one heating
circuit is available for both devices
than the boiler feed back should be
requested by the HR80 because
the boiler is controlled based on
the valve position and provides a
perfect solution.
EN0H-0482GE51 R1004 4
HCM 200D
5 EN0H-0482GE51 R1004
HCM 200D
Honeywell GmbH
71101 Schönaich
Böblinger Straße 17
Telephone (+49) (0) 7031 637-01
The right is reserved to make modifications This company is certificated to
Honeywell Inc. hereby declares that this device complies with the basic requirements and other relevant regulations of guideline 1999/5/EC. The
declaration of conformity of the product can be requested from the manufacturer.
Note to non-EU countries: This product may only be used if operation in the 433 MHz and 868 MHz frequency band is permissible.
EN0H-0482GE51 R1004
Loading...