Honeywell HCF82 PRODUCT DATA

HCF82

WIRELESS ROOM TEMPRATURE SENSOR

PRODUCT DATA

FEATURES

• Individual room temperature control. The HCF82 is

communicating with the underfloor heating controller
e.g. HCE80 to keep the room temperature constant.
The room setpoint will be sent e.g. from the CM67z or
HCM200D

• Simple binding operation to reduce installation time

• Battery powered

• Remote access to the radiator controller HR 80 with

HCM200D. The measured room temperature of the
HCF82 will be communicated to the HCM200D and
used for the room temperature control with HR80

• HCF82 used for room thermostat application with

HCM200D. The relays HS20/HS30 are switched
ON/OFF depending on the room temperature. The
room setpoint is assigned by the HCM200D

• Room temperature control combined with the shading
function for shutter control with HCM200D

• Frost protection. Depending on the measured room
temperature the relay modules HS20/HS30 are
switched ON/OFF. The HCM200 triggers the boiler
request

GENERAL

The room temperature sensor HCF 82 measures only the
current room temperature and send it to the assigned devices
e.g. underfloor heating controller HCE80 , Home tronic Manager
HCM200D. The HCF82 can be used for different applications
heating control, in combination with shutter control and frost
protection.

SPECIFICATIONS

ELECTRICAL

Operating Voltage : With 2 x AAA Alkaline Batteries

(included) or external 3 ± 10%

voltage, min. current 25 mA

RF Communication

RF band : 868,3 MHz Transmitter
Receiver class : 2
RF communication range : 30m in a residential building

RF communication : short, high rate transmission to
Technology minimize air time and avoid

collissions

ENVIRONMENTAL and STANDARDS

Storage temperature : -20 … +70 ºC
Operating temperature : 0 … +40 ºC
Temperature sensing

element : NTC 20 kΩ
Dimensions (HxWxD) : 103 x 99x 30 mm
Humidity : max. 5 … 93 %
IP class : IP30
Compatible products : HCE80, HCE80R, HCC80,

HCC80R, HCM200D
Approval : CE

environment

EN0B0547GE51 R0805

HCF82

APPLICATION EXAMPLES

Application A

Underfloor heating with and without time
program .
The room unit CM67z can control up to 2
zones with individual time program. Only the
zone 1 of the CM67z includes the room sensor
for zone 2 the HCF82 must be additional
allocated for the room temperature
measurement to the same zone of the
underfloor heating controller. The HCW82 is
sending the room temperature and setpoint
offset to the allocated zones without time
program.
Communication 868,3 MHZ

CM67z

Pump control

Pump control

Pump control

Up to 8 zones

Underfloor heating controller

Underfloor heating controller
HCE80/HCE80R/HCC80/HCC80R

HCE80/HCE80R/HCC80/HCC80R

HRA80

HRA80

HRA80

HCW 82HCF 82

Antenna for

Antenna for
HCE80

HCE80
HCE80R

HCE80R

EN0B0547GE51 R0805