Honeywell FS24X Installation Manual

2018 Product Guide Americas
Industrial Fixed Flame Detection
Issue: 1V0
Page
1.

Table Of Contents

Table of Contents
FSX Detectors: Quick Reference Chart..........................................................................................
2.
FSX Detectors Applications Chart..................................................................................................
3.
Model FS24X.................................................................................................................................
4.
Model FS20X.................................................................................................................................
5.
FS10 Fire Detection Systems.........................................................................................................
6.
FS7 Flame Detector.......................................................................................................................
7.
SS Series Flame Detectors: Quick Reference Chart........................................................................
8.
SS4-A2, AS, & AUV Series..............................................................................................................
9.
SS2-AM Series...............................................................................................................................
FSL100 Flame Detector.................................................................................................................
10.
Honeywell Analytics Service.......................................................................................................... 26
11.
10
13
16
18
19
24
25
FS24X-2
FS24X-9
FS20X
FS10
1.
FSX Detectors
3
Quick Reference Chart
Ultraviolet Band (0.18 – 0.26 µ) Visible Band (0.4 – 0.7 µ) NearBand IR (0.7 µ – 1.1 µ)
WideBand IR1 (1.1 – 3 µ)
SPECTRAL
SENSITIVITY
WideBand IR1 (1.1 – 3.5 µ)
SENSITIVITY
WideBand IR2 (3.0 – 5.0 µ)
Very High 200+ 200+ 200+
High 150 150 150 45
(feet)*
Medium 100 100 100 30
Low 50 50 50 15
Fireball / Quick Response Option (< 500 mS)
Acetylene Long Range Option
RESPONSEOTHERENCLOSURES
Field of View (conical) 110° 90° 90° 90°
TEST
HART Option
Modbus Built-In
Aluminum Class I, Div. 1
316 Stainless Steel Class I, Div. 1
FM cFM ATEX IECEx INMETRO
APPROVALS
GOST-R SIL 2 Compliant TL-2055 TL-1055
LAMPS
FS-846-B
SM4
MOUNT
*Detection distance for a one sq. ft.
reference heptane pan fire
Recommended Suitable Not Recommended
2.
FSX Detectors
4
Applications Chart
Aerosol Filling Facilities
Automotive Paint Lines
Curing Ovens
General Finishing
Liquid Paint Spray Line
FINISHINGGENERALOIL, GAS and PETROCHEMICALSGENERAL
Paint and Solvent Storage
Powder Coating Booths
Aircraft Hangars
Airport Terminals
Cold Storage Warehouses
Engine Test Cells
General Warehouse
Lumber Storage
Marine Engine Rooms
Marine Terminals
PowerPlants
Acetylene Processing and Storage
Chemical Storage Cogeneration Plants Crude and Product Tank Farms
Ethanol Production and Storage
Gas Collection Facilities Gas Compressor Buildings Gas Processing Plants Gas Turbine Enclosures Gasoline Loading Terminals Isopropanol (IPA) Production and Storage
LNG Storage/Distribution
LPG Storage/Distribution
Methanol Production and Storage
Natural Gas and CNG Plants
Offshore Drilling Platforms
Offshore Production Platforms Petrochemical Plants
Petroleum Product Pipelines Petroleum Product Pumping Stations
Rail and Truck Loading/Unloading
Refineries
Clean Rooms
Gas Cabinets
Hydrogen Gas Cabinets
Hydrogen Plants
Hydrogen Storage
IPA Stations
Silane Gas Cabinets
Silane Gas Manufacturing
Silane Gas Storage
FS24X-2 FS24X-9 FS20X FS10
3.
5

Model F24X QuadBand™

Triple IR Fire and Flame Detector (IR/IR/IR/Visible)
The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the FS24X is a quantum leap in flame and fire detection. Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection.
110° field of view with a detection range greater than 200 ft.
Features
• Patented* WideBand IR™ Technology
• Patented* Electronic Frequency Analysis™
• Visible Sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Field-of-View: 110° cone-of-vision (90° cone-of-vision model also available)
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ — pre-fire event data storage
• Event log with date and time stamp
• RS-485 Modbus communication
• Non-Isolated 4-20 mA Analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic optical path and electronic selftest
• Widest operating temperature range
• Patented* Electronics Module for components protection with easy plug-in terminations and field installation
• Two 3/4 in. NPT OR 25 mm conduit entries
• Low Power Consumption
• High RFI and EMI immunity
Benefits
• Detects hydrocarbon and non-hydrocarbon fires in all environmental conditions
• User selectable outputs
• Optimal false alarm rejection for all environmental conditions
• Minimal maintenance for trouble-free operation
• PC software and Interface Module (FSIM) for fault diagnostics, real-time graphics (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications
• Easy electronics module replacement
• Test lamps for manual testing
Certifications
• FM: Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2, Groups E, F, & G Class III
• ATEX: II 2 G D Ex d IIC T4 (Ta: -60 to +110ºC), T5 (Ta: -60 to +90ºC), T6 (Ta: -60 to +75ºC)
• CE: Complies with EN6000-6-4, EN50130-4, & EN54-10:2002 + A1:2005
• SIL Rating: FMEDA meets IEC 61508 safety requirements
3.
Description
QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &
6
Model F24X QuadBand™
Triple IR Fire and Flame Detector (IR/IR/IR/Visible)
3.1 FS24X-211 Series with 110° Field of View, Standard Temp Range -40° to 85°C
FS24X-211 Series with 110° field of view, standard temp range -40° to 85°C Part Number Description
FS24X-211-21-1
ATEX approved
FS24X-211-22-1
FS24X-211-23-1
FS24X-211-24-1
FS24X-211-21-4
FS24X-211-22-4
FS24X-211-23-4
FS24X-211-24-4
3.2 FS24X-212 Series
FS24X-211 Kits Part Number
FS24X-212-21-1
FS24X-212-22-1
FS24X-212-23-1
FS24X-212-24-1
FS24X-212-21-4
FS24X-212-22-4
FS24X-212-23-4
FS24X-212-24-4
QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ detector, 110° field of view, copper-free aluminum encl., (2) 3/4 in. NPT entries INMETRO approved QuadBand™ IR3+ detector, 110° field of view, 316 stainless steel encl., (2) 3/4 in. NPT entries INMETRO approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved
FS24X-211-21-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-22-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-23-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-23-1 QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. FS24X-211-24-1 QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.
3.
QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &
QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &
7
Model F24X QuadBand™
Triple IR Fire and Flame Detector (IR/IR/IR/Visible)
3.3 FS24X-911 Series with 90° field of view, standard temp range -60° to 85°C
FS24X-911 Series with 90° field of view, standard temp range -60° to 85°C Part Number Description
FS24X-911-21-1
ATEX approved
FS24X-911-22-1
FS24X-911-23-1
FS24X-911-24-1
FS24X-911-21-5
FS24X-911-22-5
FS24X-911-23-5
FS24X-911-24-5
FS24X-911-21-6
FS24X-911-22-6
FS24X-911-23-6
FS24X-911-24-6
QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, 316 Stainless Steel encl., (2) 3/4 in. NPT entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, for High Background IR Applications QuadBand™ IR3+ Detector, 316 Stainless Steel encl., (2) M25 entries FM, for High Background IR Applications
ATEX and EN54-10 approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX and EN54-10 approved QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx, ATEX and EN54-10 approved QuadBand™ IR3+ Detector, 316 Stainless Steel Encl. (2) M25 entries FM, cFM, IECEx & ATEX and EN54-10 approved
3.
FS24X-911-10
FS24X-912-10
Part Number
Description
SM4
TL-2055
TL-1055
SH-001
FSX-A014R
Detectors Factory installed.
QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) ¾”NPT entries FM, cFM, IECEx &
8
Model F24X QuadBand™
Triple IR Fire and Flame Detector (IR/IR/IR/Visible)
3.4 FS24X-912 Series (HART)
FS24X-912 Series Part Number Description
FS24X-912-21-1
ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.
FS24X-912-22-1
FS24X-912-23-1
FS24X-912-24-1
FS24X-912-21-4
QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) ¾” NPT entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) M25 entries FM, cFM, IECEx & ATEX approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ detector, 90° field of view, copper-free aluminum encl., (2) 3/4 in. NPT entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X
FS24X-912-22-4
FS24X-912-23-4
FS24X-912-24-4
QuadBand™ IR3+ detector, 90° field of view, 316 stainless steel encl., (2) 3/4 in. NPT entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, Copper-Free Aluminum Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed. QuadBand™ IR3+ Detector, 316 Stainless Steel Encl., (2) M25 entries INMETRO approved with FSX-A014R Optional Registered HART Module for FS24X Detectors Factory installed.
3.5 Replacement Detector Modules FS24X
Replacement Detector Modules FS24X Part Number Description
FS24X Replacement Module - standard temp range FS24X Replacement Module w/HART - standard temp range
3.6 Accessories FS24X
Accessories
Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors
PSU-12
Universal charger for Fire Sentry Test Lamps and Interface Kits. For 110-240 VAC with international plugs
IR Test lamp for testing FSX detectors, explosion proof version. Incl universal charger IR Test lamp for testing FSX detectors, non-explosion proof version. Incl universal charger Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Optional Registered HART Module for FS24X Detectors
3.
Part Number
Description
FSX-A009
FSX-A010
FSX-A006
PW-3123-0005
9
Model F24X QuadBand™
Triple IR Fire and Flame Detector (IR/IR/IR/Visible)
20.7 Spare Parts FS24X
Spare Parts
Stainless Steel Grill Kit for FS24X-2 Detectors, for -5 version only Stainless Steel Grill Kit for FS24X-9 Detectors, for -5 version only Replacement IR Bulb TL1055/TL2055 Battery Pack for FT-2145/TL-1055/TL-2055 Test Lamp
4.

Model FS20X

Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS
10
The FS20X is the latest generation high technology Multi-Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame Detectors. Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a fire and flame detector with a proven UV solar-blind Sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.
Solar blind 90° field of view and detection range greater than 200 ft.
Features
• Patented* WideBand IR™ Infrared combined with Ultraviolet
• Detection range greater than 200 ft. to 1 sq. ft. heptane fire
• Patented* Electronic Frequency Analysis
• Visible Sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Solar blind 90° coneof-vision
• Dual Microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ — Up to 6 pre-fire event data storage
• Event log — Up to 200 events with date and time stamp
• Built-in RS-485 Modbus Communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic Optical Path and Electronic Self-Test
• Widest operating temperature range
• Patented* Electronics Module for components protection with plug-in terminations for easy field installation
• Two 3/4 in. NPT or 25 mm conduit entries
• Low Power Consumption
• High RFI and EMI immunity
• FM, ATEX, CE mark approvals
• Meets SIL 2 requirements
Benefits
• Detects hydrocarbon and nonhydrocarbon fuel fires in all environmental conditions
• Arc welding immunity
• False alarm rejection for all environmental conditions
• Minimal maintenance for trouble-free operation
• PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications
Certifications
• FM: Class I, Div. 1 & 2, Groups B, C, & D; Class II, Div. 1 & 2, Groups E, F, & G; Class III
• ATEX: II 2 G D; Ex d IIC T4 (Ta: -40 to +110ºC), T5 (Ta: -40 to +75ºC), T6 (Ta: -40 to +60ºC)
• CE: Complies with EN6100-6-4 & EN50130-4, EN54-10:2002 + A1:2005
4.
Model FS20X
Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS
FS20X-211-21-4
FS20X-211-22-4
FS20X-211-23-4
FS20X-211-24-4
Part Number
Description
FSX-A014
FVR-01
PSU-12
SH-001
SM4
TL-1055
TL-2055
11
4.1 FS20X-211 Series, standard temp range -40° to 85°C
FS20X-211 Series, standard temp range -40° to 85°C Part Number Description
FS20X-211-21-2
FS20X-211-22-2
FS20X-211-23-3
FS20X-211-24-3
4.2 FS20X-212 Series w/HART, standard temp range -40° to 85°C
FS20X-212 Series, standard temp range -40° to 85°C Part Number Description
FS20X-212-21-2
FS20X-212-22-2
FS20X-212-23-3
FS20X-212-24-3
FS20X-212-21-4
FS20X-212-22-4
FS20X-212-23-4
FS20X-212-24-4
DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) ¾” NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) ¾”NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III
DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 Dual IR/UV Detector Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, INMETRO Dual IR/UV Detector 316 Stainless Steel Encl. with (2) 3/4 in. NPT entries, INMETRO DUAL IR/UV Detector Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO DUAL IR/UV Detector 316 Stainless Steel Encl. with (2) M25 entries, INMETRO
Dual IR/UV copper-free aluminum encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed Dual IR/UV copper-free aluminum encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed Dual IR/UV copper-free aluminum encl. with (2) 3/4 in. NPT entries, INMETRO. HART Module factory installed Dual IR/UV stainless steel encl. with (2) 3/4 in. NPT entries, INMETRO. HART Module factory installed Dual IR/UV copper-free aluminum encl. with (2) M25 entries, INMETRO, HART module factory installed Dual IR/UV 316 stainless steel encl. with (2) M25 entries, INMETRO, HART module factory installed
4.3 Accessories FS20X
FS20X Accessories
Optional HART Module for FS20X Detectors Field of View Restrictor Universal charger for Fire Sentry Test Lamps and Interface Kits. For 110-240 VAC with international plugs Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors IR Test lamp for testing FSX detectors, non-explosion proof version. Incl universal charger IR Test lamp for testing FSX detectors, explosion proof version. Incl universal charger
4.
Model FS20X
Multi-Spectrum Fire and Flame Detector UV/Dual IR/VIS
FS20X-211-10
FS20X-212-10
Part Number
Description
FSX-A006
FSX-A011
PW-3123-0005
12
4.4 Replacement Detector Module for FS20X
Replacement Detector Module for FS20X Part Number Description
FS20X Replacement Detector Module FS20X Replacement Detector Module w/HART
4.5 Spare Parts FS20X
Spare Parts
Replacement IR Bulb for TL1055 and TL2055 Grill Kit for the FS20X Battery Pack for FT-2145/TL-1055/TL-2055 Test Lamp
- Explosion-Proof; Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2,

FS10 Fire Detection Systems

For Liquid Paint Spray and Electrostatic Powder Coating
A high-speed microprocessor based fire detection and process control system specially
13
5.
designed for liquid and powder coating applications, the FS System 10 quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite.
The FS System 10 is the only system that provides a two for spray gun "fireball" type fires and if the fire continues, a FIRE ALARM is declared in 4-5 seconds.
90° field of view and detection range of 15 ft.
Features
- Multi-Spectral digital electro-optical infrared fire Detector
- Meets requirements of NFPA 33
- Unique two-stage ALERT and FIRE ALARM response
- Immune to false alarms caused by arcs or corona discharges
- Built-in automatic “through the lens” self-test
- Not sensitive to background radiant energy sources such as paint heaters
- Not affected by absorbing smoke or paint solvent mist in liquid pant spray booths
- Sees through paint, powder or oil residue on Detector’s lens
- Digital communications with RS-485 interface
stage response: an ALERT
Certifications
Groups E, F, & G, Class III
- FM, CE
5.1 Card Controller with FS10 Electro-Optical Fire Detector
FS10 fire Detector with card controller. Incl PC software and manual. Note: Requires backplane card and 24 Vdc.
Card Controller with FS10 Electro-Optical Fire Detector
Part Number Description
-2FL
Option
Option-2GF
Option-2WE
Option-2WL
Option-2GE
BP-1 Backplane for 1 card controller
BP-2 Backplane for 2 card controllers
BP-4-L9 Backplane for 4 card controllers
2FL system: liquid paint spray line applications with two (2) fire signal relay levels
2GF system: general finishing applications with process control and fire alarm signal relays
2WE system: powder coating and paint spray line applications with two (2) fire signal relay levels
2WL system: paint spray line applications with three (3) fire signal relay levels
2GE system: powder coating and paint spray line applications with two (2) fire signal relay levels
FS10 Fire Detection Systems
For Liquid Paint Spray and Electrostatic Powder Coating
14
5.
5.2 Spare Parts - FS10 Wall Mount Controller and Card Controller
Spare Parts - FS10 Wall Mount Controller and Card Controller
Part Number Description
SW-5143-001
FS10-CARD-2FL
FS10-CARD-2GE
FS10-CARD-2GF
FS10-CARD-2WL
FS10-Detector
FS10-DET-MODULE
Replacement keypad for FS10 wallmount
Liquid paint spray line applications with two (2) fire signal relay levels
Powder coating and paint spray line applications with two (2) fire signal relay levels
General finishing applications with process control and fire alarm signal relays
Paint spray line applications with three (3) fire signal relay levels
Model FS10 fire Detector for use with wall mount controller or card controller
Replacement electronics module for fire detector for the above systems
5.3 Detector Cables
Card Controller with FS10 Electro-Optical Fire Detector
Part Number Description
CAB-50
CAB-100
50 ft. card controller cable. Connects fire detector to controller 100 ft. card controller cable. Connects fire detector to controller
5.4 FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Includes ALARM and FAULT relays. 24 Vdc input. Temperature range (-40°C to +85°C). Approvals: FM, cFM, CSFM for Class I, Div. 2,
Groups B, C, & D.
FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Part Number Description
FS10-R30
FS10-R30-SS
FS10-R30-EC
FS10-R45 FS10-R45-SS
FS10-RN30
FS10-RN30-SS
FS10-RN45
FS10-RN45-SS
Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays) 316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays) Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays), Normally Energized with Normally Closed Contacts Copper-free aluminum housing 45 ft. sensitivity (latching alarm relays)
316 stainless steel housing 45 ft. sensitivity (latching alarm relays) Copper-free aluminum housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non-latching alert and
alarm relays)
316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non relays)
Copper-free aluminum hsg 45 ft. sensitivity (non-latching alarm relays) 316 Stainless steel housing 45 ft. sensitivity (non-latching alarm relays)
latching alert and alarm
FS10 Fire Detection Systems
For Liquid Paint Spray and Electrostatic Powder Coating
15
5.
5.5 Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Part Number Description
FS10-R30-MOD
FS10-R30-EC-MOD
FS10-R45-MOD
FS10-RN30-MOD
FS10-RN45-MOD
Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays)
Replacement electronics module for Model FS10-R30 stand alone fire Detector (latching alert and alarm relays), Normally Energized with Normally Closed Contacts
Replacement electronics module for Model FS10-R45 stand alone fire Detector (latching alarm relay)
Replacement electronics module for Model FS10-RN30 stand alone fire Detector (non-latching alert and alarm relays)
Replacement electronics module for Model FS10-RN45 stand alone fire Detector (non-latching alarm relay)
5.6 Spare Parts - FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Card Controller with FS10 Electro-Optical Fire Detector
Part Number Description
FS10R-GR-Kit
RS-232 Cable
PSU-12
Stainless steel grill Kit for FS10-R and FS10-CS Detectors (Killark housing) Kit includes: (1) SS grill, (2) SS brackets, and (2) SS screws
RS232 computer Cable for connection from FS7-130-SX, S7-2175, option-1 or option-2 controllers or interface box to PC
110/220 Vac, 50-60 HZ input /15 Vdc output : universal Charger for interface box or DD Series, FT Series and TL Series test lamps
5.7 Accessories - FS10 Stand Alone (Unitized) and Controller Based Electro-Optical
Fire Detectors
FS10 Stand Alone (Unitized) Electro-Optical Fire Detectors
Part Number Description
SM4
FS-846-B
EXPL-1
DPC-12
DASA1-P
DASA6-N
Stainless steel swivel mount allows Detector to be pointed in any direction
Test lamp Battery operated for testing FS10 fire Detectors up to 10 ft. EXTENSION POLE FOR DPC-12 Extension Pole for placing and removing Disposable Protective Covers on FS10
Detectors Disposable protective covers keeps powder or paint off the window lens of the FS10 fire Detector (12 per bag) (for use
with FS10 only)
Air shield for powder applications protects FS10 fire Detector window lens from powder build-up. Supplied with fitting for 1/4 in. tubing (can also be used with FS24X, FS20X, SS4, and SS2)
Air shield for powder applications protects FS10 Fire Detector window lens from powder build-up. Supplied with fitting for 6 mm tubing
Description
FS7-2173
FS7-2173-2RP
FS7-2173-2RP-K
FS7-2173-KALO
6.

FS7

Multi-Spectrum Fire and Flame Detector
16
The Fire Sentry FS7 Flame Detector provides and intelligent two-stage response to semiconductor wet bench fires:
Stage 1: Alert. This is the first-stage response to a small fire with a heat energy output of 3 kW (the equivalent of a 4-inch diameter polypropylene pool fire). This fire may self­extinguish.
Stage 2: Alarm. If the fire does not self-extinguish, and grows to the Factory Mutual specified heat energy threshold of 13 kW (the equivalent of an 8-inch diameter polypropylene pool fire), the second stage response is activated.
The Fire Sentry FS7-2173 is used with Fire Sentry FS7-130-SX Controller. Controller supplies power to detectors monitors the status of all detectors and communicates with the detectors via the digital RS-485 communication channel. Fire Sentry FS7-2173 is supplied with a standard 20 ft. cable connector. Detectors are connected to the controller using the self-locking connectors and Fire Sentry junction boxes. This allows for fast and easy connections eliminating wiring problems. Each detector can store up to six time and date stamped FirePics™ (pre-event multi-spectral sensor array data) in non-volatile memory. Controller can also store event history table in the non-volatile memory, which contains the time and date stamped alert, alarm and fault histories. FirePics™ and event histories can be retrieved from the controller.
6.1 Detectors
FS7 - Detectors Part Number
Additional Features and Benefits
• Multi-Spectral digital electro-optical radiant energy infrared fire detector
• Unique two-stage fire detection response
• Immune to false alarm sources
• NOT affected by absorbing smoke, gasses or chemical vapors
• NOT sensitive to background radiant energy from electric heaters and ovens
• Detects hydrocarbon and non-hydrocarbon fires
Viton O-ring. For use with FS7-130-SX Controller Non-Latching Alert and Alarm relays. Viton O-ring. Non-Latching Alert and Alarm relays. Kal-rez O-ring. Kal-rez O-ring. For use with FS7-130-SX Controller
• Rugged leak-proof, heat-sealed, acidresistant, injection-molded polypropylene housing
• Wide 120° field-of-view
• Digital communication with RS-485 interface
• FirePic™; time and date-stamped digital fire signatures
• Built-in detector automatic self test
• Unitized model design for stand-alone operation
Description
FS-746-B
FT-S7
CBMM-5
CBMM-10
Description
PW-3123-0002
6.2 Controller Systems
17
Controller Systems FS7
Part Number Description
FS7-130-SX
Multi-Zone Compact Controller, designed to be installed in Fire Panels, which monitors up to 12 Model FS7-2173 Fire Detectors. Programmable for up to 4 zones with relay outputs for ALERT and ALARM. Requires 24 VDC. Approvals: FM & CSFM
6.3 Accessories
FS7 - Accessories Part Number
Test Lamp. Battery operated for testing FS7 Fire Detectors up to 10 ft. distance. Test Lamp. Battery operated for testing FS7 Fire Detectors up to 2 ft. distance.
FS7-2179
Junction Box for connecting Model FS7-2173 Fire Detectors in a daisy chain or star configuration. Complete with (4) Lemo female connectors. Required for Model FS7­130-SX applications.
6.4 Interconnection Cables
FS7 - Interconnection Cables Part Number Description
5 ft. cable with Male/Male Lemo connectors, (Junction Box to Junction Box). 10 ft. cable with Male/Male Lemo connectors, (Junction Box to Junction Box).
CBMO-20
CBMO-50
20 ft. cable with Male Lemo connector/open pigtail, (Junction Box to Model FS7-130­SX Controller or Model S7-2175 Control Panel). 50 ft. cable with Male Lemo connector/open pigtail, (Junction Box to Model FS7-130­SX Controller or Model S7-2175 Control Panel).
6.5 Spare Parts
Spare Parts Part Number
PSU-12
110/220 VAC, 50-60 HZ Input /15 VDC Output : Universal Charger for Interface Box or DD Series, FT Series and TL Series Test Lamps Replacement Battery for FT-S7 Tester (1 required)
7.
SS Series of UV and UV/IR Fire and Flame Detectors
18
Quick Reference Chart
Ultraviolet Band (0.18 - 0.26 µ)
Visible Band (0.4 - 0.7 µ)
SPECTRAL
SENSITIVITY
WideBand IR (0.7 - 3.5 µ)
Very High 60 60 60 60
High 45 45 45
(feet)*
Medium 30 30 30
SENSITIVITY
Low 15 15 15
Ultra High-Speed Response (Munitions)
Optimized Response (H4Si, H2, Alcohols, CH4)
RESPONSEOTHERENCLOSURES
Standard Response
Field of View 120° 120° 120° 120°
SS4-A SS4-AS SS4-AUV SS2-AM
HART Option
Modbus Option
4-20 mA Option
Aluminum Class I, Div. 1
316 Stainless Steel Class I, Div. 1
FM cFM ATEX IECEx INMETRO
APPROVALS
GOST-R SIL 2 Compliant FT-2145 (Explosion Proof)
DD85001 (Short Range) - Discontinued 85001- Discontinued
SOURCE
TEST LAMPS/
TS2 - Discontinued
SM4
188424
MOUNT
*Detection distance for a one sq. ft.
reference heptane pan fire
SS4-A2 / AS2
SS4-AUV2
8.
120° field of view with range up to 60 ft.
• Class III
120° field of view with range up to 60 ft.
19

SS4 Series

Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)
The SS4 is a hazardous area certified flame detector for the detection of hydrocarbon (SS4­A2) and nonhydrocarbon fires (SS4-AS2). This multispectrum detector senses radiant energy in the ultraviolet (UV), visible and wideband infrared (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence. The field of view is the widest in the industry with 120° field of view with a range of 60 ft. This means more hazard can be covered by each detector.
Features
• Multi-Spectrum™: senses ultraviolet, visible and Wide Band Infrared™
• Built-in test for optical “through the lens” testing
• False alarm immunity
• Detects hydrocarbon and nonhydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
While retaining all the features of the standard SS4-A2, the SS4-AS2 is optimized for the detection of ethanol, methanol, hydrogen and natural gas with a range up to 60 ft. range and a field of view of 120°, the UV only Version, SS4-AUV2, is for indoor applications where UV sources such as welding are not present.
Features
• Senses solar-blind ultraviolet band
• Built-in test for optical “through the lens” testing
• Utilizes long-life, ruggedized UV Sensors
• Detects hydrocarbon and nonhydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable Detector sensitivity
• Microcomputer based algorithms: FirePic™, Snapshot™ and UV Plot
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
• FM, ATEX mark approvals
Certifications
• Explosion-proof
• Class I, Div. 1 & 2, Groups B, C and D
• Class II, Div. 1 & 2, Groups E, F and G
8.
20
SS4 Series
Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)
8.1 SS4 Series
SS4-A2, SS4-AS2, & SS4-AUV2 FM Certification Part Number Description
SS4-A2
SS4-A2-SS
SS4-AS2
SS4-AS2-SS
SS4-AUV2
SS4-AUV2-SS
SS4-A2-M
SS4-A2-SS-M
SS4-AS2-M
SS4-AS2-SS-M
Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT
Stainless Steel UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT
Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non­latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non­latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT
SS4-A2 Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.
SS4-A2-SS Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.
SS4-AS2 Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AS2-SS Stainless Steel UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.
8.
21
SS4 Series
Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)
SS4-AUV2-M
SS4-AUV2-SS-M
SS4-A2-H
SS4-A2-SS-H
SS4-AS2-H
SS4-AUV2-H
SS4-AUV2-SS-H
SS4-A2, SS4-AS2, & SS4-AUV2 ATEX Certification
SS4-A2-C-E
SS4-A2-CSS-E
SS4-AS2-C-E
SS4-AS2-CSS-E
SS4-A2-C-E-M
SS4-A2-CSS-E-M
SS4-AUV2 Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with MA420­4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-SS Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-A2 Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.
SS4-A2-SS Stainless Steel UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.
SS4-AS2 Aluminum UV/IR, FM, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non-latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AUV2 Aluminum UV, FM, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with SS4­FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-SS Stainless Steel UV, FM Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, CSFM for C1, D1, Groups B,C,D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART Factory installed.
Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25
Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25
SS4-A2-C-E Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.
SS4-A2-CSS-E Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed.
8.
FT-2145
FVR-01
MA420-4
SH-001
SM4
SS4-FSCHCOM
22
SS4 Series
Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)
SS4-AS2-C-E-M
SS4-AS2-CSS-E-M
SS4-AUV2-C-E-M
SS4-AUV2-CSS-E-M
SS4-A2-C-E-H
SS4-A2-CSS-E-H
SS4-AS2-C-E-H
SS4-AS2-CSS-E-H
SS4-AUV2-C-E-H
SS4-AUV2-CSS-E-H
SS4-AS2-C-E Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AS2-CSS-E Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-C-E Aluminum UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, ATEX, IECEx Zone 1 (2) M25 with MA420­4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-AUV2-CSS-E Stainless Steel UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED FM, cFM, ATEX, IECEx Zone 1 (2) M25 with MA420-4 4-20 mA Module for SS4 Detectors New version Factory installed. SS4-A2-C-E Aluminum UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.
SS4-A2-CSS-E Stainless Steel UV/IR, ATEX, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx FOR Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.
SS4-AS2-C-E Aluminum UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AS2-CSS-E Stainless Steel UV/IR, ATEX, optimised for Non-Hydrocarbons and Silane, Ethanol, Methanol, Hydrogen & Natural Gas Fires, Non Latching Alarm LED, FM, cFM, ATEX, IECEx for Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-C-E Aluminum UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED, FM, cFM, ATEX, IECEx Zone 1 (2) M25 with SS4­FSCHCOM SS4 Module HART Factory installed. SS4-AUV2-CSS-E Stainless Steel UV, FM, ATEX, Hydrocarbon & Non-Hydrocarbon Fires, indoor applications, Non-latching Alarm LED FM, cFM, ATEX, IECEx Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART Factory installed.
8.2 Accessories SS4-AS, SS4-AS2, & SS4-AUV2
Accessories SS4-AS, SS4-AS2, & SS4-AUV2 Part Number Description
UV/IR Test Lamp with universal charger (FM & ATEX approval) Field of view restrictor 4-20 mA Module for SS4 Detectors New version Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Stainless Steel Swivel mounting assembly for FS24X, FS20X and SS4 detectors SS4 Module HART
8.
SS4-MOD-A2
SS4-MOD-AS2
SS4-MOD-AUV2
SS4-MOD-A2-M
SS4-MOD-AS2-M
SS4-MOD-A2-H
SS4-MOD-AS2-H
SS4-MOD-AUV2-H
H200
LAMP-3135-0002
LAMP-3125-0002
TN2-MOD-PIL
PW-3123-0005
interface Kits. For 110-240 Vac with international plugs
23
SS4 Series
Multi-Spectrum™ Electro-Optical Digital Fire & Flame Detector (UV/IR & UV)
8.3 Spares SS4-A, SS4-A, & SS4-AUV2
SS2-A and SS4-AS Part Number Description
Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED with 4-20mA Output Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED with 4-20mA Output
SS4-MOD-AUV2-M
PSU-12 Power supply for use with FT-2145 and FT-2145-2; PSU-12 is a Universal Charger for Fire Sentry test lamps and
Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED with 4-20mA Output
Replacement Electronics Module for SS4-A2 (UV/IR) Detectors. Module only, non-latching LED with HART Output Replacement Electronics Module for SS4-AS2 (UV/IR) Detectors. Module only, non-latching LED with HART Output Replacement Electronics Module for SS4-AUV2 (UV) Detectors. Module only, non-latching LED with HART Output UV Test Source Module for SS4 Detectors IR Test Lamp Bulb (FT-2145) Replacement lamp for FT-2145 UV Test Lamp Bulb (FT-2145) + Fixture Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps
Description
Part Number
Description
SM4
FT-2145
SH-001
FVR-01
Description
SS2-MOD-AM
SS2-MOD-AML
LAMP-3135-0002
TN2-MOD-PIL
PW-3123-0005
9.
120° field of view with range up to 60 ft.
24

SS2-AM Series

Ultra-High Speed Digital Fire and Flame Detector (UV/IR)
The Model SS2-AM, (non-latching Fire Alarm relay), and SS2-AML (latching Fire Alarm relay), represent the world´s pre-eminent Ultra-High Speed UV/IR technology for Electro­Optical Fire and Flame Detectors, with thousands successfully operating in a multitude of installations worldwide. This detector senses radiant energy in the Ultraviolet (UV), Visible and WideBand Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence. 120° field of view with range up to 60 ft.
Features
• Multi-Spectrum senses energy in the UV, Vis and WideBand IR™
• False alarm immunity
• Detects hydrocarbon and nonhydrocarbon fires
• Microprocessor based algorithms: FirePic™ and Tri-Mode Plot™
• Wide field of view and solar blind
• Wide temperature range of operation
• Explosion-proof housing
• FS2000™ System compatible or stand-alone operation
• Compatible with approved fire alarm panels
• FM, ATEX mark approvals
9.1 SS2-AM Series
SS2-AM Series
Part Number
SS2-AM
SS2-AML
Copper-Free Aluminum Housing UV/IR/VIS High-Speed Electro-Optical Flame Detector, Non­Latching Alarm Relay, ALARM & FAULT Relays, Class I, Division 1, Groups B, C, & D, FM, CSFM, & cFM Approved, 3/4 NPT
Copper-Free Aluminum Housing UV/IR/VIS High-Speed Electro-Optical Flame Detector, Latching Alarm Relay, ALARM & FAULT Relays, Class I, Division 1, Groups B, C, & D, FM, CSFM, & cFM Approved, 3/4 NPT
9.2 Accessories SS2-AM
Accessories SS2-AM
Stainless Steel Swivel mounting assembly for FS24X, FS20X, SS4, SS2 detectors UV/IR Test Lamp with universal charger, (FM & ATEX approval) Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel Field of View Restrictor
9.3 Spares SS2-AM
Spares SS2-AM
Part Number
SS2-AM Replacement Electronics Module SS2-AML Replacement Electronics Module IR Test Lamp Bulb (FT-2145) UV Test Lamp Bulb (FT-2145) + Fixture Battery Pack for Model FT-2145/Tl-1055/TL-2055 Test Lamps
Description
FSL100-SM21
FSL100-TL
FSL100-TLX
* Please contact Honeywell representative
Description
FSL100-TLBT
FSL100-TLBU
FSL100–TLCH
10.
25

Series FSL100 Flame Detectors

10.1 UV (Ultraviolet) Flame Detector
UV (Ultraviolet) Flame Detector Part Number Description
FSL100-UV
FSL100-UV-W
UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing UV flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing.
10.2 UVIR (Ultraviolet & Infrared) Flame Detector
UVIR (Ultraviolet & Infrared) Flame Detector Part Number Description
FSL100-UVIR
FSL100-UVIR-W
UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing. UV/IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate FM3260 approval. White Housing.
The new FSL100 series is the latest generation range of Mid market Flame Detectors from Honeywell Analytics. The range consists of UV, UVIR and IR3 flame detectors. All utilize sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms. The FSL100 may be small and lightweight for easy installation but they are designed to work in tough environments both in and out of doors as well as potentially explosive atmospheres. With a large field of view they can detect a range of different types of fire including hydrocarbon and non hydrocarbon sources.
Note: A swivel mount should be ordered with each Flame Detector.
10.3 IR3 (3 Infrared bands) Flame Detector
IR3 (3 Infrared bands) Flame Detector Part Number Description
FSL100-IR3
FSL100-IR3-W
Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. Red Housing. Triple IR flame detector. Suitable for ATEX zone 2/22; FM 3611 Class 1,2&3 Div2 EN54-10 (HIGH sensitivity) certificate. FM3260 approval. White Housing.
10.4 Accessories
Accessories Part Number
FSL100 Optional swivel mount FSL100 test lamp, incl. universal charger and carrying case; non EX FSL100 test lamp, incl. carrying case; intrinsically safe (Pending *)
10.5 Spare Parts
Accessories
Part Number
12 Vdc battery for FSL-TL test lamp H3 light bulb for FSL-TL test lamp Universal charger kit for FSL-TL test lamp
- Instrument calibration equipment certified to national/regional standards
- Site surveys
- Stock surveys
11.

Honeywell Analytics Service

Lincolnshire, IL 60069
26
Honeywell Analytics Service contact information:
USA Service Workshop Honeywell Analytics 405 Barclay Blvd.
USA Tel: 800-538-0363 (option #5) E-mail: ha.us.service@honeywell.com
Calgary Service Department Honeywell Analytics Suite 110, 4411 – 6 Street SE Calgary AB T2G 4E8 Canada Tel: 1-800-563-2967 Email: haservice.canada@honeywell.com
Honeywell Analytics’ global standing for portable, fixed and low level toxic gas detection is backed up with a dedicated team of professionals that takes service and support to a whole new level.
It’s your choice... Whatever industry you’re in, we have the levels of support that are right for your business.
It’s your business. It’s your industry. And no matter whether you’re managing personnel for confined space entry, or securing your plant against gas risks, the process has to keep moving. The alternative is downtime, or even total shutdown, and then the risks to your business are far greater.
Honeywell provides service levels that make it easy to choose the right kind of support to keep your plant and people safe; to keep your business up and running - because that’s our job!
Choose from:
Installation and Commissioning Con
- Installation, configuration and commissioning
- Functional tests - On-site/workshop repair and calibration
- Start-up
- Staff training
- Bump testing
tract Maintenance
Service and Repair
- Modification and conVersion
Calibration and Surveys
11.
Honeywell Analytics Service
27
Field Service: We have a global network of fully qualified and highly skilled Technical Support Resources and Field Service Specialists ready to support your business. Honeywell Analytics is ready to support you 24 hours a day / 7 days a week in the United States & Canada.
For Monday thru Friday Daytime support please contact Honeywell Analytics and follow the voice prompts. In the US please dial 1­800-538-0363. Technical Support is currently Option 4 then Option 3. In Canada please dial 1-800-563-2967 Option 1 English, Option 2 French. Tech Support is currently Option 2.
For Afterhours and weekend support please contact Honeywell Analytics at 1-847-634-2842. Phone support rates will apply.
www.honeywell.com
Contact Honeywell Analytics
Find out more - www.honeywellanalytics.com
USA
Honeywell Analytics, Inc.
405 Barclay Blvd. Lincolnshire, IL 60069 USA analytics.industrial.sales@Honeywell.com
USA Technical Services
Tel: 888-955-2585
haservice.workshop.us@honeywell.com
Canada Technical Services
Tel: 800-538-0363 (Pre-Sales: Option 2, Post-Sales: Option 3)
ha.us.service@honeywell.com
Canada
2840 2nd Ave SE
Calgary, Alberta, Canada T2A 7X9 3580 Rue Isabelle Unit 100 Brossard, Quebec, Canada
J4Y 2R3
Industrial Fixed
Toll free: 1-800-538-0363
Fax: 1-847-955-8210
HA_CustomerService@honeywell.com is.gas.techsupport@honeywell.com
Europe, Middle East, Africa
Life Safety Distribution AG
Javastrasse 2
8604 Hegnau Switzerland Tel: +41 (0) 44 943 4300 Fax: +41 (0) 44 943 4398
gasdetection@honeywell.com
Asia Pacific
Honeywell Analytics, Asia Pacific #701 Kolon Science Valley (1)
43 Digital-Ro 34-Gil, Guro-Gu Seoul 152-729 Korea
Tel: +82 2 6909 0300
Fax:+82 2 2025 0388 analytics.ap@honeywell.com
Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract.
HA Fixed Product Guide 2018_1V0_AMERICAS 02/18 © 2018 Honeywell Analytics
Loading...