Honeywell EXCEL 100C SPECIFICATION DATA

Excel 100C
CONTROLLER
HONEYWELL EXCEL 5000 OPEN SYSTEM
GENERAL
The Excel 100C Controller is a direct-digital control, microprocessor-based, programmable controller for managing building functions.
The Excel 100C monitors and commands HVAC equipment controls for buildings (industrial, retail, hotel, school, health care buildings, etc.). It can operate as a stand-alone unit or as an integral part of a higher-order system.
The Excel 100C easily accommodates expansion via a sophisticated peer-to-peer Communication Bus (C-Bus). Up to 30 devices such as Excel Building Supervisors (XBS), other controllers, interfaces to 3 connected to the C-Bus. Long-distance communication to a remote XBS is supported via modem or ISDN.
The Excel 100C is easily handled using the XI582 Operator Terminal (supports bus-wide access) or the PC-based XL­Online tool for easy start-up of the controller (e.g. down­loading applications, implementing on-site adjustments, etc.). A PC-based Excel Building Supervisor workstation provides a graphic operator interface for managing a network of controllers.
Control applications are generated using CARE, a PC-based graphic tool which simplifies the engineering process. Once the control applications have been engineered, they can be simulated and adjusted in CARE, which also assists in the startup and troubleshooting of the application programs.
rd
part systems etc. can be
DESCRIPTION
Excel 100C supports twelve universal inputs, twelve universal outputs, and twelve digital inputs. This enables the Excel 100C to handle a wide variety of small to medium-sized applications.
The capabilities of the Excel 100C can be enhanced with additional controllers connected to the same C-Bus.
The controllers on the C-Bus are able to exchange and share data.
Remote service and maintenance is supported via an integrated interface for modem or ISDN communication.
Download of firmware and applications into the flash memory of the Excel 100C is possible from the PC-based XL-Online tool as well as from the building manager XBS. This func­tionality is used to upgrade the firmware or the applications.
The memory and the real-time clock are backed up by a gold capacitor. This prevents problems related to the disposal of dead batteries, environmental problems, etc.
FEATURES
Stand-alone or integrated networked operation via
C-Bus
Integrated communication interfaces: Remote via Modem / ISDN
Freely programmable applications
36 inputs / outputs:
12 universal inputs 12 universal outputs 12 digital inputs
Multiple operator interface options
Program for wiring test included
LED indicators
RAM back-up via gold capacitor (no battery needed)
Flash EPROM for application and firmware
download
® U.S. Registered Trademark Copyright © 2008 Honeywell Inc. All Rights Reserved EN1R-0143GE51 R0308
EXCEL 100C CONTROLLER
SPECIFICATIONS
Housing Material:
Plastic
Dimensions: (H x W x D) 9-1/4 x 7-1/2 x 2-7/8 in. (235 x 192 x 72 mm)
Weight:
2.6 lbs, 1.2 kg per controller.
Mounting Options:
Cabinet mounted on DIN-rail, or wall.
I/O Terminal Options:
Wiring sub-base with screw terminals.
Protection Class:
IP30 (with cover mounted).
Environmental Limits:
Temperature:
Operating: 0
Storage: -20 Humidity (operating or storage): 5…90% rh non-condensing
Supply voltage:
24 Vac ± 20%, 50…60 Hz 24 Vdc +20%, -10% Wiring sub-base with screw terminals.
Power Consumption:
Max. 25 VA
Memory / real time clock back up:
72 hours via gold capacitor.
Approvals:
UL864 (XL100CUUKL)
UL916 (XL100CU)
...+
50 °C (vertically mounted)
...+
60 °C
I/O Point Characteristics:
type characteristics
12 universal inputs
12 digital inputs
12 universal outputs
All inputs and outputs protected against over-voltage up to 24 Vac.
Digital Output (Relays):
MCE 3: Two spdt (changeover contact) relays (K1, K2),
MCD 3: Two (normally-open contact) relays (K1, K2) for
Alarm Relay: (Optional). Audible signal transmitter for con-
Sensor: NTC 20 k at 25 °C
PT1000 at 0 °C
-58...302 °F (-50...+150 °C)
Voltage: 0…10 V (software controlled
switches for low / high impedance)
Current: 0 (4) to 20 mA (by using external
500 Ω resistor) Resolution: 12 Bit For dry contacts or input signals up to 24 Vac/dc. By using as totalizer or counter inputs digital inputs 1 and 2 (pin 13, 14) max. frequency: 15 Hz
min. pulse duration: 20 ms min. pulse break: 33 ms
max. chatter time: 5 ms digital inputs 3 to 12 (pin 15-18; 49-54) max. frequency: 0.4 Hz min. pulse duration: 1.25 s min. pulse break: 1.25 s max. chatter time: 50 ms universal outputs (Analog or Digital):
0...10 Vdc, 20 mA max. (max.
load 500 Ω)
one spst (normally-open contact) relay (K3). K1, K2, and K3 rated max. 240 V, 2 A.
floating control and one spdt (changeover contact) relay (K3). K1 and K2 rated 240 V,
0.2 A and K3 rated max. 240 V, 2 A.
trollers watchdog timer. Optional silence switch with controller return-to-normal audible alarm available.
EN1R-0143GE51 R0308 2
EXCEL 100C CONTROLLER
Logic Levels: Logic 1 from 5 V or higher with a hysteresis of 2.5 V, digital signal must fall below 2.5 V for Logic 0.
Man-Machine-Interface XI582 (Optional)
Keypad:
8 function keys.
Display:
Backlit LCD, 6 lines, 34 characters per line, adjustable contrast.
Bus and Port Connections
C-Bus:
Up to 76.8 Kbps, switch provided for selectable termination.
Controller Serial Port:
9-pin Sub-D connector, RS 232 for external MMI XI582 and XL-Online PC MMI, or modem / ISDN terminal adapter.
XI582 Operator Interface
Buswide MMI functionality.
Assignment Overview for Excel 100C
AI 1 xx0101
AI 2 xx0102
AI 3 xx0103
AI 4 xx0104
AI 5 xx0105
AI 6 xx0106
AI 7 xx0107
AI 8 xx0108
AI 9 xx0201
AI 10 xx0202
AI 11 xx0203
AI 12 xx0204
DI 1 xx0301
DI 2 xx0302
DI 3 xx0303
DI 4 xx0304
DI 5 xx0305
DI 5 xx0305
shield T x D R x D +5 V (Xi582), RTS (modem)
CTS not used GND DTR DCD not used
reserved
C+
system bus
C-
Output voltage 24 V / 300 mA is protected against short-circuiting. After short-circuiting, it takes time (approx. 60 sec.) for voltage to recover.
(MCD3/MCE3, only!)
analog
input
digital
input
1 2 3 4 5 6 7 8 9
10
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
NOTE: Terminals 65 and 66 provide a pulsed 24 Vdc output, and can be used only to connect relay modules MCD3/MCE3. Do not connect relays to these terminals!
AO 1 xx0401
AO 2 xx0402
AO 3 xx0403
AO 4 xx0404
AO 5 xx0405
AO 6 xx0406
AO 7 xx0407
AO 8 xx0408
AO 9 xx0501
AO 10 xx0502
AO 11 xx0503
AO 12 xx0504
DI 7 xx0307
DI 8 xx0308
DI 9 xx0309
DI 10 xx0310
DI 11 xx 0 311
DI 12 xx0312
24V relay module
REF.
alarm
(not used)
transformer
common
{
{
37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72
analog
input
digital
input
­24 V_
300 mA
+
+
10 V
10 mA
+
24 Vac +/-20%
3 EN1R-0143GE51 R0308
EXCEL 100C CONTROLLER
DIMENSIONS
192 mm (7.56 in.)
36 mm
(1.42 in.)
235 mm (9.25 in.)
124 mm (4.88 in.)
40 mm
(1.57 in.)
WIRING SUB-BASE
96 mm (3.78 in.)96 mm (3.78 in.)
8 mm
(0.32 in.)
216 mm (8.5 in.)
168 mm (6.61 in.)
72 mm
(2.83 in.)
12 mm
(0.47 in.)
MCD 3 - MCE 3
48 mm
93 mm (3.66 in.)
95 mm (3.74 in.)
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH Böblinger Straße 17 D-71101 Schönaich Phone: (49) 7031 63701 Fax: (49) 7031 637493 http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
EN1R-0143GE51 R0308
MDE 3
(1.89 in.)
MCE 3
42 mm
(1.65 in.)
1 _ s n e
m i
D
Loading...