COMP230-xxx-20 / COMP400-xxx-20
SMARTDRIVE COMPACT INVERTERS
PRODUCT DATA
SPECIFICATIONS
Mains Connection
|
|
Input voltage Uin |
208…240 Vac (-15…+10%), 1~ |
|
|
|
|
380…480 Vac (-15…+10%), 3~ |
|
|
|
Input frequency |
45…66 Hz |
|
|
|
Connection to mains |
Once per minute or less |
|
|
|
Brake chopper |
Integrated as standard in |
|
|
|
|
380…480 Vac products from |
|
|
|
|
1.5 kW and up |
|
|
|
Motor Connection |
|
|
GENERAL |
Output voltage |
0 - Uin, 3~ |
||
|
with max. +50 °C ambient |
|||
|
|
Output current |
IN: Continuous output current |
|
These variable frequency drives provide step less speed |
|
temperature, overloadability |
||
control for various applications: |
|
1.5 x IN (1min/10min) |
||
|
Pumps |
Starting current |
2 x IN 2s/20s |
|
|
Fans |
Output frequency |
0…320 Hz |
|
|
Compressors |
|||
Frequency resolution |
0.01 Hz |
|||
|
Conveyors, etc. |
|||
|
|
FEATURES
Compact size
Flexible side-by-side mounting with screws or DIN-rail as standard
Single rating suitable for both pump and fan or machine applications
Maximum ambient temperature: +50 °C
Integrated RFI-filters
Wide Input and Output connection possibilities
Configurable inputs and outputs
30s Start-Up Wizard
Easy “keypad – remote” change with 1 button
Parameter upload/download even without powering the inverter with COMP-LOADER accessory
Silent motor operation with 4 kHz switching frequency
Overtemperature ride-through
Power ride-through
Automatic restart
Integrated PI controller
Control Characteristics
Control method |
Frequency Control U/f |
|
Open Loop Sensorless Vector |
|
Control |
Switching frequency |
1.5...16 kHz; |
|
default 4 kHz |
Field weakening point |
30…320 Hz |
Acceleration time |
0.1…3000 sec |
Deceleration time |
0.1…3000 sec |
Braking torque |
DC-brake: 30%*TN (without |
|
brake resistor) |
Ambient Conditions |
|
Operating temperature |
-10 °C (no frost)…+50 °C |
|
ambient: rated loadability IN |
|
NOTE: Two models with max. |
|
operating temperature of +40 °C. |
|
See table on page 3. |
Storage temperature |
-40 °C…+70 °C |
® U.S. Registered Trademark |
EN0B-0638GE51 R1009 |
Copyright © 2009 Honeywell Inc. • All rights reserved |
|
SmartDrive COMPACT VARIABLE FREQUENCY DRIVES
Air quality |
|
Chemical vapors |
IEC 721-3-3, unit in operation, |
|
class 3C2 |
Mechanical particles |
IEC 721-3-3, unit in operation, |
|
class 3S2 |
Altitude |
100% load capacity (no derating) |
|
up to 1000 m |
|
1% derating for each 100 m |
|
above 1000 m; max. 2000 m |
Relative humidity |
0…95% RH, non-condensing, |
|
non-corrosive, no dripping water |
Vibration |
3...150 Hz |
EN50178, EN60068-2-6 |
Displacement amplitude 1(peak) |
|
mm at 3...15.8 Hz |
|
Max acceleration amplitude 1 g |
|
at 15.8...150 Hz |
Shock |
UPS Drop Test (for applicable |
EN50178, IEC 68-2-27 |
UPS weights) |
|
Storage and shipping: max 15 g, |
|
11 ms (in package) |
Enclosure class |
IP20 |
Electro Magnetic Compatibility (EMC) |
|
Immunity |
Complies with EN50082-1, -2, |
|
EN61800-3 |
Emissions |
|
Standard product |
EN 61800-3 Category C2 (EMC- |
|
level H) |
With external RFI-filter |
EN 61800-3 Category C1 (EMC- |
|
level C) |
Safety |
|
EN60204-1, EN 61800-5 |
CE |
UL508C |
UL, cUL |
(see unit nameplate for more detailed approvals) |
|
Control connections |
|
Analog input voltage |
0...+10V, Ri = 200kΩ (min), |
|
Resolution 10 bit, accuracy ±1%, |
|
electrically isolated |
Analog input current |
0(4)…20 mA, Ri = 200Ω |
|
differential resolution 0.1%, |
|
accuracy ±1%, electrically |
|
isolated |
Digital inputs |
6 positive logic; 0…+30 VDC |
Voltage output for |
+24V, ±20%, max. load 50 mA |
digital inputs |
|
Output reference voltage |
+10V, +3%, max. load 10 mA |
Analog output |
0(4)…20 mA; RL max. 500 Ω; |
|
resolution 16 bit; accuracy ±1% |
Digital outputs |
|
Relays |
2 programmable relay outputs (1 |
|
NO/NC and 1 NO), |
|
Max.switching load: 250 Vac/2 A |
|
or 250 Vdc/0.4 A |
Open collector |
1 open collector output with max. |
|
load 48 V/50 mA |
Protections
Overvoltage protection |
875VDC in COMP400-xxx-20 |
|
437VDC in COMP230-xxx-20 |
Undervoltage protection |
333VDC in COMP400-xxx-20 |
|
160VDC in COMP230-xxx-20 |
Earth-fault protection |
In case of earth fault in motor or |
|
motor cable, only the frequency |
|
converter is protected |
Unit overtemperature |
YES |
protection |
|
Motor overload |
YES |
protection |
|
Motor stall protection |
YES |
(fan/pump blocked) |
|
Motor underload |
YES |
protection (pump dry / |
|
belt broken detection) |
|
Short-circuit protection |
YES |
of +24V and +10V |
|
reference voltages |
|
Overcurrent protection |
Trip limit 4,0*IN instantaneously |
EN0B-0638GE51 R1009 |
2 |
SmartDrive COMPACT VARIABLE FREQUENCY DRIVES
MODELS
Mains voltage 230 V (208-240 V), 50/60 Hz, 1~in/3~out
|
|
Motor nominal |
|
Loadability |
|
|
|
|
|
Dimensions |
|
|
|
||
|
|
power |
|
Rated |
|
50% overload |
|
Enclosure |
|
Mechanical |
|
|
Weight |
||
|
Inverter type |
|
|
|
|
|
WxHxD |
|
|||||||
|
230V supply |
|
continuous |
|
current |
|
class |
|
size |
|
|
[kg] |
|||
|
|
|
current IN |
|
|
|
|
[mm] |
|
||||||
|
|
50 °C P[kW] |
|
|
[A] |
|
|
|
|
|
|
|
|
||
|
|
|
[A] |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMP230-P37-20 |
0.37 |
|
2.4 |
|
3.6 |
|
IP20 |
|
MI1 |
|
66x157x98 |
|
0.55 |
|
|
COMP230-P75-20 |
0.75 |
3.7 |
5.6 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP230-1P1-20 |
1.1 |
4.8 |
7.2 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP230-1P5-20 |
1.5 |
7.0 |
10.5 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP230-2P2-20 *) |
2.2 |
|
9.6 |
|
14.4 |
|
IP20 |
|
MI3 |
|
100x251x109 |
|
1 |
|
*) The unit has max. +40 °C ambient temperature
Mains voltage 400 V (380480 V), 50/60 Hz, 3~
|
|
Motor nominal |
|
Loadability |
|
|
|
|
|
Dimensions |
|
|
|
||
|
Inverter type |
power |
|
Rated |
|
50% overload |
|
Enclosure |
|
Mechanical |
|
|
Weight |
||
|
|
continuous |
|
|
|
|
WxHxD |
|
|||||||
|
|
400V supply |
|
current IN |
|
current |
|
class |
|
size |
|
[mm] |
|
[kg] |
|
|
|
50 °C P[kW] |
|
|
[A] |
|
|
|
|
|
|
|
|
||
|
|
|
[A] |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMP400-P55-20 |
0.55 |
|
1.9 |
|
2.9 |
|
IP20 |
|
MI1 |
|
66x157x98 |
|
0.55 |
|
|
COMP400-P75-20 |
0.75 |
|
2.4 |
|
3.6 |
|
IP20 |
|
MI1 |
|
66x157x98 |
|
0.55 |
|
|
COMP400-1P1-20 |
1.1 |
3.3 |
5.0 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP400-1P5-20 |
1,5 |
4.3 |
6.5 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP400-2P2-20 |
2.2 |
5.6 |
8.4 |
|
IP20 |
|
MI2 |
|
90x195x102 |
0.7 |
|
|||
|
COMP400-3P0-20 |
3.0 |
|
7.6 |
|
11.4 |
|
IP20 |
|
MI3 |
|
100x251x109 |
|
1 |
|
|
COMP400-4P0-20 |
4.0 |
|
9.0 |
|
13.5 |
|
IP20 |
|
MI3 |
|
100x251x109 |
|
1 |
|
|
COMP400-5P5-20 *) |
5.5 |
|
12.0 |
|
18.0 |
|
IP20 |
|
MI3 |
|
100x251x109 |
|
1 |
|
*) The unit has max. +40 °C ambient temperature
PRODUCT IDENTIFICATION CODE
COMP 400 - 1P1 - 20
Enclosure classification 20 = IP20
Nominal power P75 = 0.75 kW 1P1 = 1.1 kW etc.
Supply voltage
230 = 230 Vac 1~ (208-240 Vac)
400 = 400 Vac 3~ (380-480 Vac)
Product range: COMP = SmartDrive Compact
Fig. 1. Product Identification Code
3 |
EN0B-0638GE51 R1009 |