Honeywell 6500 User Manual

®

Dolphin

with Windows® CE 5.0

User’s Guide

6500 Mobile Computer

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other infor­mation contained in this document without prior notice, and the reader should in all cases consult HII to
determine whether any such changes have been made. The information in this publication does not rep­resent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved.
No part of this document may be photocopied, reproduced, or translated into another language without
the prior written consent of HII.

Web Address: www.honeywellaidc.com

Trademarks

Dolphin, Dolphin RF, HomeBase, eBase, Mobile Base, and QuadCharger are trademarks or registered
trademarks of Hand Held Products, Inc. or Honeywell International Inc.

Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.

Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.

Patents

Refer to the product packaging for a list of patents.

Other Trademarks

The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell
International Inc.

©2010 Honeywell International Inc. All rights reserved.

Table of Contents

Chapter 1 - Agency Approvals

Label Locations....................................................................................................................1-1

Safety & RF Approvals by Country: .....................................................................................1-2

Dolphin RF Terminal—802.11b/g and/or Bluetooth .............................................................1-3

Chapter 2 - Getting Started

Out of the Box ......................................................................................................................2-1

LED Indicators................................................................................................................2-2

Desktop................................................................................................................................2-3

Command Bar Icons ............................................................................................................2-4

Chapter 3 - Terminal Hardware Overview

Standard Terminal Configurations .......................................................................................3-1

Front Panel Features ...........................................................................................................3-2

Display Backlight..................................................................................................................3-3

Screen Backlight - Battery/External Power ....................................................................3-3

Keyboard Backlight ..............................................................................................................3-3

Using Screen Protectors ......................................................................................................3-3

Back Panel Features............................................................................................................3-8

Installing Memory Cards ................................................................................................3-9

Left Side Panel Features ...................................................................................................3-10

Right Side Panel Features .................................................................................................3-10

Top Panel Features ...........................................................................................................3-10

Bottom Panel Features ......................................................................................................3-11

Dolphin Peripherals/Accessories for the Dolphin 6500......................................................3-11

USB Communication Cable for the Dolphin 6500..............................................................3-12

Battery Power ....................................................................................................................3-12

Resetting the Terminal.......................................................................................................3-15

Soft Reset (Warm Boot) ...............................................................................................3-15

Hard Reset (Cold Boot)................................................................................................3-16

Suspend Mode...................................................................................................................3-16

Changing the Memory Allocation .......................................................................................3-16

Care and Cleaning of the Dolphin Terminal.......................................................................3-17

Chapter 4 - Using the Keypad

Overview ..............................................................................................................................4-1

Navigation Keys ...................................................................................................................4-1

Basic Keys ...........................................................................................................................4-2

Alpha/Numeric Modes..........................................................................................................4-2

Alpha Indicators on the Number Keys............................................................................4-2

Function Key Combinations .................................................................................................4-3

CTRL Key Combinations .....................................................................................................4-4

Program Buttons ..................................................................................................................4-5

iii

Chapter 5 - Using the Image Engine

Overview.............................................................................................................................. 5-1

Available Image Engines ..................................................................................................... 5-1

Depth of Field ................................................................................................................5-1

Supported Bar Code Symbologies ..................................................................................... 5-2

Activating the Engine...........................................................................................................5-3

Decoding ............................................................................................................................. 5-3

Capturing Images ................................................................................................................5-5

Chapter 6 - Communication

Communication Options ...................................................................................................... 6-1

Installing Additional Software .............................................................................................. 6-1

Connecting the USB Charging/Communication Cable for the Dolphin 6500....................... 6-2

Charging Terminal with USB Cable..................................................................................... 6-2

ActiveSync Communication................................................................................................. 6-3

Wireless Radios................................................................................................................... 6-6

Connecting the Terminal to a Wireless Network............................................................ 6-6

WLAN (802.11b/g Radio) .................................................................................................... 6-6

Adding Programs from the Internet ..................................................................................... 6-7

Chapter 7 - Bluetooth Handler

Enabling the Bluetooth Radio .............................................................................................. 7-1

Connecting to Other Devices............................................................................................... 7-1

Pairing Bluetooth Devices ...................................................................................................7-1

Setting Up a Bluetooth Printer ............................................................................................. 7-1

Setting Up a Connection to a Mobile Phone........................................................................ 7-2

Chapter 8 - Dolphin HomeBase/eBase Device

Overview.............................................................................................................................. 8-1

Front Panel ......................................................................................................................... 8-2

Back Panel .........................................................................................................................8-3

Powering the Dolphin HomeBase Device............................................................................ 8-4

eBase Clamp-on Ferrite Core Installation ........................................................................... 8-4

Charging the Main Battery................................................................................................... 8-5

Charging a Spare Battery .............................................................................................. 8-6

Checking Battery Power ...................................................................................................... 8-6

Technical Specifications ...................................................................................................... 8-7

Chapter 9 - Dolphin QuadCharger Device

Overview.............................................................................................................................. 9-1

QuadCharger Device .......................................................................................................... 9-1

Battery Charging.................................................................................................................. 9-2

Recommendations for Storing Batteries.............................................................................. 9-3

Troubleshooting................................................................................................................... 9-3

Technical Specifications ...................................................................................................... 9-4

iv

Chapter 10 - Customer Support

Product Service and Repair............................................................................................... 10-1

Online Product Service and Repair Assistance........................................................... 10-1

Technical Assistance......................................................................................................... 10-2

Online Technical Assistance........................................................................................ 10-2

Limited Warranty ...............................................................................................................10-3

Limited Warranty Duration................................................................................................. 10-3

How to Extend Your Warranty ..................................................................................... 10-4

v

vi

1

Compliance Label

Laser Light Label

Agency Approvals

Label Locations

Dolphin 6500 mobile computers meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Read these guidelines
carefully before using your mobile computer.

Laser Light Label

LASER LIGHT. DONOT STARE INTOBEAM
CLASS 2 LASER PRODUCT

1.0 mW MAX OUTPUT : 650nM
IEC 60825-1:1993+A1+A2

Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

1 - 1

Safety & RF Approvals by Country:

!

0983

Country Safety RF (Radio)

U.S.A. UL60950-1 FCC Part 15, Sub part B, Sub

part C

Canada C-UL CSA C22.2 No. 60950-1-03 ICES-003, RSS 210

European
Community

China CCC SRRC

Japan PSE AIRB

Australia EN60950 AS/NZS4268

Brazil ANATEL

Mexico NOM-019 COFETEL

New Zealand EN60950 AS/NZS4268

IEC 60825-1:1993+A1:1997+A2:2001 EN55022 (CISPR 22) Class B

EN55024:1998
EN300 328
EN301 489-1
EN301 489-7
EN301 489-17
IEC 62209-2

R&TTE Compliance Statement—802.11b/g and/or Bluetooth

Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC).

This product is marked with in accordance with the Class II product requirements specified
in the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European
Community; PAN European Frequency Range: 2.402–2.480 GHz.

Restrictions for use in France are as follows:

• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz

• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 MGHz band.

The CE Mark on the product indicates that the system has been tested to and conforms with the
provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/95/

EC Low Voltage Directive. Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low
Voltage Directive.

For further information, contact:

Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands

1 - 2

Laser Safety Label

LASER LIGHT.

DONOTSTARE INTOBEAM

1.0 mW MAX OUTPUT : 650nM
IEC 60825-1:1993+A1+A2

CLASS 2 LASER PRODUCT

Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.

If the following label is attached to your product, it indicates the product contains
a laser engine or laser aimer.

Laser Eye Safety Statement: This device has been tested in accordance with
and complies with IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT:
650nM.

This class 2 laser product is in accordance with the requirements of IEC60825-1 Ed. 1.2 Clause 6.2(a).
Caution - use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

LED Safety Statement

The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified
to be under the limits of a Class 1 LED device.

CB Scheme

Certified to CB Scheme IEC 60950-1.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Dolphin RF Terminal—802.11b/g and/or Bluetooth

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for

additional suggestions. The user may find the following booklet helpful: “Something About Interference.”
This is available at FCC local regional offices. Our company is not responsible for any radio or television
interference caused by unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by our company. The correction is the
responsibility of the user. Use only shielded data cables with this system.

In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

1 - 3

This device and its antenna must not be co-located or operating in conjunction with any other

!

antenna or transmitter. To maintain compliance with FCC RF exposure guidelines for body­worn operation, do not use accessories that contain metallic components.

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could

void the user's authority to operate the equipment.

Canadian Compliance

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) installed outdoors
is subject to licensing.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

For European Community Users

Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for its production. It may contain
hazardous substances that could impact health and the environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment and to diminish the pressure
on the natural resources, we encourage you to use the appropriate take-back systems for product
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a
sound way.

The crossed out wheeled bin symbol informs you that the product should not be disposed of along
with municipal waste and invites you to use the appropriate separate take-back systems for product
disposal.

If you need more information on the collection, reuse, and recycling systems, contact your local or
regional waste administration.

You may also contact your supplier for more information on the environmental performances of this
product.

1 - 4

2

Cover Locks

Main Battery

Getting Started

Out of the Box

Verify that your carton contains the following items:

• Dolphin 6500 mobile computer (the terminal)

• Main battery pack (3.7v, Li-Ion)

• AC power supply

• Localized plug adapters

Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Product

Service and Repair on page 10-1.

Step 1. Install the Main Battery

The Dolphin 6500 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the main battery.

1. Release the strap making it convenient to reach the cover.

2. Remove the battery compartment cover by turning the cover’s locks upward and removing the
cover.

3. Insert the battery into the battery well with the labels facing upward.

4. Replace the cover with a hinging motion and turn the locks downwards.

Note: The battery door must be installed prior to booting the unit.

2 - 1

5. Replace the hand strap.

!

Dolphin 6500s ship with both the main battery pack
and internal backup battery significantly
discharged of power. Charge the main battery
pack with the Dolphin charging cable until the LED
turns green (red while charging). The average
charge time for a fully depleted main battery is
5 1/2 hours. It takes less time if the battery has
some charge.

1. Attach the appropriate plug adapter to the
plug of the power cable.*

2. Insert the plug into the appropriate power
source.

3. Plug the Dolphin power cable into the DC

Power Jack (see page 3-11) on the bottom

end of the unit.

Note: If you remove the battery pack or it completely

discharges, there is a 30 minute window in which
to insert a charged battery pack before the
backup battery completely discharges. If your
backup battery completely discharges, the
contents of the RAM memory will be lost. If your
backup battery is less than fully charged, there is
a proportionally smaller window of time available.

LED Indicators

Red LED On

Charging

Green LED On

Battery is fully charged

1

2

3

!

We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.

Step 2. Charge the Batteries

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non­Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry
before connecting to an external power source

.

2 - 2

*The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only

Power Adapter

Plug Adapter

Power Cable

Tap to change
views

power adapter cables from Honeywell convert the voltage appropriately. The power cable contains a plug
adapter for each geography (US, UK, EU, etc.).

Step 3. Boot the Terminal

The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or
interrupt the boot process.

When the boot process is complete, the Desktop appears, and the terminal is ready for use.

Desktop

Note: You can access the Desktop any time by tapping the Change Views icon in the command bar and selecting

Desktop on the popup menu.

2 - 3

Command Bar Icons

Left and right arrows are used to
scroll through additional icons

The command bar, located at the bottom of application screens, provides access to many system
functions and programs.

Icon Meaning

Opens the Start menu.

Tap to change views between open applications or to return to the desktop.

Accesses the Bluetooth radio. Double tap this icon to open the Bluetooth Handler (see page 7-1).

Shows signal strength of WiFi radio. (A red X indicates it is not currently associated to an AP.)

Double tap to configure your WLAN Secure Wireless Client. For complete configuration
instructions, download the Honeywell Secure Wireless (SWC) Client User’s Guide from

www.honeywellaidc.com.

Indicates Ethernet communications. When the terminal is undocked, no icon appears. When it is
docked without a cable, the icon has a red X through it. When docked with a cable connected, this
icon displays.

Indicates that the USB communication cable is connected. Double tap to display USB status
window.

Indicates the status of battery power. Double tap to open the Power control panel setting.

When this icon shows a red power plug, it indicates the device is using external power.

Displays the current time. Double tap to change the time and date.

28-key keypad - Indicates whether the keypad is standard alpha (uppercase and lowercase), all
caps alpha, or in numeric mode. Press the ALPHA button on the keypad to switch modes.
52-key keypad - Press the SFT key twice in rapid succession to toggle between upper and
lowercase as indicated by the icon. Pressing the SFT key once temporarily toggles for the next
typed key and then reverts back. You can also change from upper/lowercase by selecting the
“ABC”/”abc” indicator and selecting CAP on the keyboard that displays. Pressing a number key
results in a number appearing in the application. Pressing SFT key once and typing a number on
the keypad results in a special character appearing in the application.

The up arrow allows you to turn the Wireless LAN and Bluetooth connection on or off. It also
allows you to toggle between the Keyboard and Transcriber. When Keyboard is selected, a
keyboard is displayed so you can tap text and number keys. Transcriber recognizes handwriting
and symbols entered using the stylus.

2 - 4

Using the Stylus

!

The terminal comes with a stylus included in a loop on the hand strap. Use this stylus (or your finger) to
select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the
same as a click.

Tap Tap the touch screen once or double tap to open menu items and select options.
Drag Hold the stylus on the screen and drag across the screen to select text and images.
Tap & hold Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap

the action of the task you want to perform.

Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input
panel and may cause damage not covered by the warranty.

For more information about the touch screen, see Touch Screen Display on page 3-2.

2 - 5

Selecting Programs

Tap Start > Programs. To open a program, tap the icon on the menu.

Pop-Up Menus

You can quickly choose an action for an item using the pop-up menus.

1. Tap and hold the stylus on the item name. The pop-up menu appears.

2. Lift the stylus and tap the action you want to perform.

The contents of pop-up menus change according to the program you are using.

Using Windows Explorer

Use Windows Explorer to navigate through the files on your system. On the desktop, double tap the My
Device icon and Windows Explorer opens to the root level.

Move files by tapping and holding on the file, then tapping Cut, Copy or Paste on the pop-up menus that
appear.

2 - 6

3

Terminal Hardware Overview

Dolphin 6500 terminals include a number of standard terminal configurations as well as charging and
communication peripherals and accessories to maximize the efficiency of your application setting.

Standard Terminal Configurations

There are two standard Dolphin 6500 configurations: WPAN only and WPAN/WLAN. Both configurations
include the following options; however, the WPAN/WLAN configuration has both a Bluetooth radio and an

802.11b/g radio.

Dolphin 6500 WPAN and WPAN/WLAN

• Microsoft Windows CE 5.0

• Marvell PXA 300 624MHz

• 128MB RAM X 128 MB (non-volatile) Memory

• 28-key numeric keypad (alpha shifted) and 52­key full alpha and numeric keypad

• 3.5” transflective active matrix 65k color LCD
display with backlight, QVGA (240 x 320)

• Li-Ion battery: 3.7V / 3300mAh / 12.2 Wh

• 5300SR image engine with laser aiming

• (WPAN) - Bluetooth radio

• (WPAN/WLAN) - Bluetooth and 802.11b/g
radio

• Dolphin power cable (included with each
Dolphin 6500)

3 - 1

Front Panel Features

Scan/Decode LED

Touch Screen
Display (screen
protector
installed at the
factory)

(28-key keypad (numeric)

Navigation Keys

Power Key

Software Reset Key

Scan/Decode LED

Touch Screen
Display (screen
protector
installed at the
factory)

Navigation Keys

(arrow keys)

Power Key

Software Reset Key

(52-key keypad (full alphanumeric)

!

Scan/Decode LED

Keypad

Microphone

Touch Screen Display

The LED lights red when you press the Scan trigger in scanning applications.
The LED lights green when a scanned bar code is successfully decoded.
The LED lights red while the main battery is charging.
The LED lights green when the main battery charging is completed.
The LED lights blue or red during soft and hard resets.
The LED is user-programmable.

28-key numeric keypad (alpha shifted) and 52-key full alphanumeric keypads are available.

The integrated microphone can be used for audio recording.

The display is a 3.5” transflective active matrix, 65k color LCD display with a backlight, QVGA
(240 x 320 resolution); see Display Backlight on page 3-3. The touch panel is a 4-wire analog
resistive touch.

Dolphin 6500s ship with a screen protector already installed over the touch screen lens
to help prevent damage to the touch screen. Do NOT remove this screen protector before
initial use. Honeywell recommends using screen protectors, especially for applications
that require high volume interfacing with the touch screen. For more information, see

Using Screen Protectors on page 3-3. You can purchase additional screen protectors by

contacting your Honeywell sales representative.

3 - 2

For touch screen input, use the stylus included with the terminal or your finger. The method

!

you choose depends on which one is most appropriate for your application. While there is a
great deal of variation in different applications, you generally achieve greater accuracy with the
stylus for buttons or icons that are close together.

Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage
the input panel and may cause damage not covered by the warranty.

Display Backlight

The intensity of the backlight of the touch screen display may be changed, and the backlight may be
programmed to turn off after the terminal has been idle for a specified period of time.

To adjust the intensity of the backlight while on battery power, tap Start > Settings > Control Panel >
double tap Backlight.

Screen Backlight - Battery/External Power

Move the slider to adjust the screen backlight while on battery power.
You may turn the screen backlight off if the device is not used for a designated

period of time by checking the option and designating the desired time period.
You may also turn on the screen backlight when a button is pressed or the

screen is tapped by selecting the appropriate checkbox.

Note: Using the backlight option while on battery power substantially reduces battery

life.

You may make the same changes when on external power by tapping the

External tab.

Keyboard Backlight

The intensity of the backlight of the keys on the keyboard may be changed and
the backlight may be programmed to remain on for a specified period of time
once a key is pressed.

To adjust the brightness of the keys, tap the Keyboard tab. Move the slider
to adjust the backlight while on battery power.

To turn on the keyboard backlight, check the checkbox and change the
duration of the backlight.

Using Screen Protectors

Honeywell defines proper use of the terminal touch panel display as using a screen protector and proper
stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which
is why their use is recommended for applications that require a high to medium level of interface with the
touch panel.

Honeywell continues to advocate the use of screen protectors on all Dolphin terminals. We recommend
implementing a screen protector replacement program to ensure that screen protectors are replaced
periodically when signs of damage/wear are noticeable. For general use, we recommend replacing the
screen protector every thirty (30) days. However, replacement cycles vary according to the average level
of touch panel use in your application.

3 - 3

Replacement screen protectors can be purchased directly from Honeywell. Contact a Honeywell sales
representative for details.

Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than

0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.
Honeywell’s warranty policy covers wear on the touch panel for the first 12 months provided that a screen

protector is applied and an approved stylus is used for the 12-month duration covered by the warranty.

Removing the Screen Protector

Dolphin 6500s ship with a touch screen protector already installed. To replace the screen protector, you
must remove the one already installed.

1. Press the red Power button to suspend the 28-key unit or press the Blue then Z (Power) keys to
suspend the 52-key unit.

2. Using a strong, flat, plastic card (e.g., credit card) wedge the edge of the card under the existing
screen protector. Catch the edge of the screen protector and pull it up and away from the touch
panel.

Note: If you have one, you can also use the small plastic squeegees designed for touch panels.

3. Wipe the screen with a clean, non-abrasive, lint-free cloth.

Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel.

Installing Your Screen Protector

When installing a new screen protector, use a flat plastic card (e.g., credit card) to apply the screen
protector smoothly and remove any air bubbles.

Note: If you have one, you can also use the small plastic squeegees designed for touch panels.

1. Press the red Power button to put the terminal in Suspend Mode on the 28-key Dolphin 6500 or
press the Blue then Z (Power) keys on the 52-key Dolphin 6500.

3 - 4

2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is on

Screen Protector

Backing
Paper

the touch panel.

3. Release the left edge of the backing paper on the screen protector.

4. Align the exposed edge of the screen protector along the left edge of the touch panel.
Make sure that it lies flush with edges of the touch panel.

Note: To reposition the screen protector, lift up gently and reapply.

5. Use the card on top of the screen protector to smooth it out as you pull on the backing paper.

3 - 5

6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but
firmly. Use the card as necessary to smooth out any air pockets or bumps after application.

7. Press the Power key to wake the terminal and check the touch panel with the stylus.

8. Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.

9. Press the red Power button to put the terminal back in Suspend Mode on the 28-key Dolphin 6500
or press the Blue then Z (Power) keys on the 52-key Dolphin 6500.

10. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.

11. Press the Power key to wake the terminal again.

3 - 6

12. For maximum performance, recalibrate the screen. Tap Start > Settings > Control Panel > double
tap Stylus > Calibration tab.

13. Tap Recalibrate and follow the instructions on the screen.

3 - 7