Honeywell 3-48C, 3-144C, 3-520C, 3-520, 3-144 User Manual

Galaxy
3-48C, 3-144, 3-144C, 3-520, 3-520C
User Guide
Honeywell Security
Table of Contents
Introduction ...................................................................................... vii
Compliance and Approvals ............................................................. vii
General ................................................................................................................ 1
Number Keys (0 – 9) ............................................................................................. 1
View Keys (A and B) ............................................................................................ 1
Enter Key (ent) ..................................................................................................... 2
Escape Key (esc) .................................................................................................. 2
Hash Key (#) ......................................................................................................... 2
Star Key (*) ........................................................................................................... 2
Power LED ........................................................................................................... 2
Banner .................................................................................................................. 2
User Codes ........................................................................................................... 2
SETTING THE SYSTEM......................................................................3
Before Setting ...................................................................................................... 3
Entering A Pin - User Type 2.1 - 2.2 .................................................................... 3
Entering A Pin - User Type 2.3 - 3.6 .................................................................... 3
Setting groups ..................................................................................................... 3
Exit time ............................................................................................................... 3
Sounder ................................................................................................................ 4
Zones Open .......................................................................................................... 4
Final Door/Terminator ......................................................................................... 4
System Set ........................................................................................................... 4
Part Setting .......................................................................................................... 4
Cancelling The Setting ....................................................................................... 4
Group Name ......................................................................................................... 4
MAX SETTING OPTIONS .................................................................... 5
Setting with User Cards/Tags/Fobs .................................................................... 5
Dual Focus ........................................................................................................... 5
Keyprox ................................................................................................................ 5
UNSETTING THE SYSTEM ................................................................6
Normal Entry ........................................................................................................ 6
Straying From the Entry Route ........................................................................... 6
Slow Entry ............................................................................................................ 6
Cancelling Alarms ............................................................................................... 6
Manager Reset ..................................................................................................... 6
Engineer Reset .................................................................................................... 6
Unsetting with the MAX Cards ............................................................................ 6
iii
Fault and Tamper Conditions ............................................................7
Resetting Fault and Tamper Conditions ........................................... 7
Overriding Fault and Tamper Conditions when Setting .................. 7
MENU OPTIONS ................................................................................. 8
Full Menu ............................................................................................................. 8
Quick Menu .......................................................................................................... 8
Accessing The Menu ........................................................................................... 9
Full Menu ............................................................................................................. 9
Quick Menu .......................................................................................................... 9
Omit Zones (User Type 2.3 and Above) ............................................................ 10
Purpose ........................................................................................................................ 10
Selecting Omit Zones ..................................................................................................10
Viewing Eligible Zones ................................................................................................ 10
Omitting Zones ............................................................................................................. 10
Setting With Omitted Zones ......................................................................................... 10
Vibration Zones ............................................................................................................ 10
Atm 1/2/3/4 Zones ........................................................................................................ 11
Forced Set (User Type 2.3 and Above) ............................................................. 11
Purpose ........................................................................................................................ 11
Selecting Forced Set .................................................................................................... 11
Non-omittable Zones ................................................................................................... 11
Chime (User Type 2.3 and Above) .................................................................... 12
Purpose ........................................................................................................................ 12
Selecting Chime ..........................................................................................................12
Chime In Operation ...................................................................................................... 1 2
Display Zones (User Type 2.4 and Above) ........................................................ 12
Purpose ........................................................................................................................ 12
Selecting Display Zones .............................................................................................. 12
Address ........................................................................................................................ 12
Function .......................................................................................................................12
Status............................................................................................................................ 13
Description ................................................................................................................... 13
Selecting And Viewing ..................................................................................................13
Escape .........................................................................................................................13
Display Log (User Type 2.4 and Above) .......................................................... 13
Purpose ........................................................................................................................ 13
Selecting Display Log .................................................................................................. 13
Events ........................................................................................................................... 13
Selecting a Date ........................................................................................................... 13
Viewing Each Event ...................................................................................................... 1 3
Additional Information .................................................................................................. 14
Printing ......................................................................................................................... 14
Print (User Type 2.4 and Above) ....................................................................... 14
Purpose ........................................................................................................................ 14
Selecting Print .............................................................................................................. 14
Codes........................................................................................................................... 14
iv
Zones ........................................................................................................................... 14
Log ............................................................................................................................... 14
All .................................................................................................................................. 14
Help Message .............................................................................................................. 14
Walk Test (User Type 2.5 and Above) ............................................................... 15
Purpose ........................................................................................................................ 15
Selecting Walk Test...................................................................................................... 15
All Zones ...................................................................................................................... 15
Selected Zones ............................................................................................................ 15
Ending Walk Test ......................................................................................................... 15
Time/Date (User Type 3.6) ................................................................................. 16
Purpose ........................................................................................................................ 16
Selecting Time/Date .................................................................................................... 16
Changing Time ............................................................................................................ 16
Changing Date ............................................................................................................. 16
Advance and Retard ..................................................................................................... 16
...................................................................................................................................... 16
Codes (User Type 3.6) ....................................................................................... 17
Purpose ........................................................................................................................ 17
Manager Code ............................................................................................................. 17
Selecting Codes ..........................................................................................................18
User Codes .................................................................................................................. 18
Modify Pin ..................................................................................................................... 18
Modify Type ................................................................................................................... 19
Modify Name ................................................................................................................ 20
Time Zone .................................................................................................................... 20
Temporary Codes ........................................................................................................ 21
Pin Change .................................................................................................................. 21
Modify Groups .............................................................................................................. 22
Max Number ................................................................................................................. 23
Max Function ................................................................................................................ 24
Max Keypad .................................................................................................................. 24
Forgive Antipassback ................................................................................................... 24
Pin Warning .................................................................................................................. 2 5
Summer (User Type 3.6) .................................................................................... 25
Trace (User Type 3.6) ......................................................................................... 26
Timer Control (User Type 3.6) ........................................................................... 26
Group Omit (User Type 3.6) ............................................................................... 29
Remote Access (User Type 3.6) ......................................................................... 30
Access Authorization (User Type 3.6) .............................................................. 31
1 = Engineer ................................................................................................................. 31
2 = Manager ................................................................................................................. 31
AVOIDING FALSE ALARMS.............................................................. 32
ZONE REFERENCE TABLES .......................................................... 33
v
ALARM AND HELP MESSAGES ...................................................... 34
Alarm In Progress ........................................................................................................ 34
Pa Reset Required ...................................................................................................... 34
Manager Reset Required ............................................................................................ 34
Engineer Reset Required ............................................................................................ 34
Alarm Cause Code ...................................................................................................... 34
No Entries ....................................................................................................................34
Invalid Selection ........................................................................................................... 34
Invalid Code ................................................................................................................. 34
Technistore Reset ........................................................................................................ 34
No Modules Added ....................................................................................................... 3 4
INSTALLER DETAILS ....................................................................... 35
APPENDIX 1 - NOTE FOR SWEDISH MARKET .............................. 35
Resetting Using Alarm Cause Code ................................................................. 35
vi

INTRODUCTION

The Galaxy 3 Series alarm system is a microprocessor controlled system which has been designed using the latest software and hardware technology.
First and foremost, the Galaxy 3 Series meets all your security needs. The engineer will program and commission the system to your own exacting requirements.
Warning:
There are no user serviceable parts inside. Please refer all servicing to a qualified installer.

Compliance and Approvals

Public Switched Telephone Network (PSTN) approval
The equipment has been approved to Council Decision 98/482/EC for Pan -European single terminal connection to the Public Switched Telephone Network (PSTN). However due to differences between the individual PSTNs provided in different countries the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
In the event of problems contact the equipment supplier in the first instance.
The Galaxy is designed to interwork with the following networks:
Austria France Italy Norway Switzerland
Belgium Greece Liechtenstein Portugal United Kingdom
Denmark Iceland Luxembourg Spain * Germany
Finland IrelandThe Netherlands Sweden
* May have interworking difficulties.
NOTE: Contact the equipment supplier before using the Galaxy on any network not listed.
vii

KEYPAD INFORMATION

General

The Galaxy Alarm system is controlled by Galaxy Mk7 Full Alpha Liquid Crystal Display (LCD) keypads. A maximum of 8 keypads can be connected to the Galaxy 3-48 control panel, 16 keypads to the Galaxy 3-144 control panel and 32 keypads to the Galaxy 3-520 control panel.
LCD Display
Number Keys
Star Key
Power LED
GALAXY 520 V5.00 08:58 TUE 22 NOV
1
2
4
5
8
7
0
*
A
3
View keys
B
6
ent
9
esc
#
Enter Key
Escape Key
Hash Key
Number Keys (0 – 9)
These keys are used to enter the code and to select and modify options.
Before carrying out operations on the system, users must identify themselves with a Personal Identification Number (PIN). This number is at least a 4 digit number selected from keys 0 - 9.
The number keys are also used where groups are programmed on the system permitting groups (areas) to be set or unset.

View Keys (A and B)

These keys have been programmed to activate one of the system options. Pressing the A > key after a valid code has been entered starts the full set routine. Pressing the < B key after a valid code has been entered starts the part set routine.
Once a system option has been selected, the A > or < B keys can be used to operate as view keys, stepping forwards (A >) or backwards (< B) through lists of information. Holding down a view key while viewing an option list, rapidly displays each item in the list, permitting quick access to the information.
1

Enter Key (ent)

The ent key accepts and processes entered data. Valid actions are performed and the next option is accessed.

Escape Key (esc)

The esc key aborts the current option to return to the previous option level. Any option modification made prior to the option being aborted is erased. Successive pressing of the esc key returns the user to the start display (known as the BANNER).
The esc key also aborts the setting routine if pressed during the exit time.

Hash Key (#)

The # key is used to display additional choices for certain options, e.g. ADVANCE/RETARD the time in the Time/Date option.
This key is also used as the user duress key (by pressing twice following a valid code entry).

Star Key (*)

The * key is used to provide additional features for certain options, e.g. printing the event log or deleting entries.

Power LED

The green power LED remains lit whenever the keypad is connected to a mains power supply. A mains power failure is indicated by the LED flashing slowly. The LED flashes rapidly if the battery voltage falls below the minimum threshold or if one of the fuses on the control panel PCB blows.

Banner

The banner is the display shown on the keypad, e.g. Galaxy 520 V5.00 (with the time and date on the bottom line). This is shown at all times when the system is unset, unless the menu is being accessed or an alarm or help message is on the display. The banner can be changed by the engineer. In the set condition the banner is normally blank.

User Codes

The user code is a unique PIN (Personal Identification Number) of at least 5 digits in length. The PIN identifies the user to the Galaxy Alarm panel and allows operation of the system.
2

SETTING THE SYSTEM

Before Setting

Code + ent
TIMED SET 120
Code + A
SET A12345678 Groups UUU-----
SET A12345678 Groups SUU-----
TIMED SET 120
Code + A
SET A12345678 Groups USS-----
SET B12345678 Groups USS-----
TIMED SET 60
Code + A
1
ent
A Key
ent
Before setting the system ensure all doors and windows are secured and areas protected by movement detectors are free from obstruction.

Entering A Pin - User Type 2.1 - 2.2

As each digit is entered the keypad responds with a bleep and displays a *. When all the digits are entered, press the ent or A > key to start the setting routine.

Entering A Pin - User Type 2.3 - 3.6

As each digit is entered the keypad responds with a bleep and displays a *. When all the digits are entered press the A > key to start the setting routine.

Setting groups

Where group choice has been assigned to the PIN, select which groups have to set as part of the setting routine. The set status of each group is displayed on the keypad screen. Possible status options are :-
R = Ready (Groups is unset, and all zones are closed)
F = Faulted (Group is unset, and at least one zone is open)
S = Set (Group is set)
L = Lockout (Group is locked out, and cannot be unset)
Select which groups have to be to set by entering the number of the group. For example, to set groups 2 and 3 press keys 2 and 3 . The display changes to indicate the groups selected for setting. Pressing the ent key starts the setting routine for the specified groups. The Galaxy 3-520 has more than 8 groups. If the user has group choice, the available groups will be displayed at the keypad follow­ing a valid code + A >. The groups will be displayed showing A1 to A8. Use both A > and < B keys to scroll to the various sets of groups. If the user does not have group choice, entering the PIN and A > will cause all groups assigned to the user to set.

Exit time

If all the system zones are closed when the setting routine is started, the display indicates the remaining time, in seconds, to vacate the premises. Exit the building using the agreed route.
3

Sounder

During the setting period the sounder emits a continuous tone if all of the zones are closed. If a zone is opened during the setting period, the sounder begins to pulse. The sounder also pulses during the last 25% of the setting time to indicate time running short.

Zones Open

3 zones open [<] [>] to view
PIN + B
PART SET 120
The exit time will reset should any zones be open or opened during setting. The display will indicate the number of zones open and invite viewing. Closing the zones will restart the exit time. An alarm will be generated if setting is not completed before the Fail to Set period ex­pires. (Fail to Set; programmed by engineer).
Note: Before closing the open zone, press esc to abort the setting
routine. The ESC TO ABORT message will flash as a reminder.

Final Door/Terminator

The setting procedure can be manually completed by either closing the FINAL door or by pressing the TERMINATOR button.

System Set

When time has expired or a manual termination is made, the system waits four seconds before setting. The sounders emit two long tones to confirm that the system is set. The keypad briefly displays the message SYSTEM SET, before returning to the banner.

Part Setting

To Part Set the system press the < B key after the PIN. Only the zones which have the PART attribute enabled are set. All other setting features are the same.
SET A12345678 Groups RRRRRRRR
+ #
*
A1 OFFICE AREA R [<] [>] #=CHANGE

Cancelling The Setting

The setting routine can be aborted by pressing the esc key before the system sets.

Group Name

Press * and # keys simultaneously when groups are displayed on the keypad (when setting for example), will display the name of the group . The group name should be programmed by the installation engineer. Press the * and # keys to return to the group display.
4

MAX SETTING OPTIONS

Setting with User Cards/Tags/Fobs

MAX user cards/tags/fobs can be used to set the system. This is done by assigning a MAX user card (tag or fob) with one of the setting options. When the MAX card is held against a MAX module for five seconds, the MAX function is activated. For example, if the MAX function assigned is 13 = Part Set, then activating the card held function results in the system being part set.
If a user is assigned group choice, then a keypad will have to be accessed to select the group for setting after swiping the card.

Dual Focus

If a # is assigned to a particular users pin and their max card number, then the user will have dual focus operation. This means that they will have to enter their pin first, before setting with the max card and vice versa.

Keyprox

A keyprox is a keypad that has a card reader built in. They are normally installed on systems where dual focus setting and unsetting are used. Keyproxes are used as a keypad and MAX as detailed above, but the card is held against the lower right corner of the keypad as shown in the following diagram:
*
1
2
4
5
8
7
0
A
3
B
6
ent
9
esc
#
5

UNSETTING THE SYSTEM

Normal Entry

PIN + ent
Galaxy 520 V5.00
15.49 MON 18 Nov
PIN + ent
4 ALARMS [<] [>] to View
Unsetting starts immediately when the FINAL door is opened or an ENTRY zone is activated. The sounder pulses slowly and the user must go directly to the keypad and enter a valid PIN, followed by A>, <B or ent. Users with group choice, will access the UNSET screen following
PIN entry. This permits the user to unset specific groups. To return to the SET screen press ent.

Straying From the Entry Route

Go directly to the keypad when entering the building. If the user strays into a protected area and activates a zone, an alarm will occur. The police may be called out and the system will have to be reset.

Slow Entry

Enter a valid PIN before the entry time expires. If the entry time expires before a valid PIN is entered, then an alarm will occur. The sounder begins to pulse quickly when 75% of the entry time has elapsed indicating time is running short.

Cancelling Alarms

To cancel an alarm, enter a valid PIN followed by ent at the keypad. The keypad displays details of the zone activated. When more than one zone is activated, details can be viewed using A > or < B. Press ent to return to the banner. Certain types of alarms, once cancelled, require a code with the appropriate reset authorisation to be entered. The system prompts for a valid reset code by displaying Manager Reset Re- quired or Engineer Reset Required on the keypad.
CALL MANAGER
RESET REQUIRED
CALL ENGINEER
RESET REQUIRED

Manager Reset

Entering a manager type PIN followed by ent, resets the system following an alarm activation.

Engineer Reset

Certain types of alarm require an engineer to visit the site and, after investigation, reset the system. In such cases, the system cannot be reset until the engineer reset has been carried out.

Unsetting with the MAX Cards

If any of the groups assigned to the MAX are set, then swiping the MAX module with a card unsets the groups. Group choice and dual focus operation, where implemented will apply as per setting instruc­tions.
6
Loading...
+ 30 hidden pages