User Guide
Waterproof Fire Safe
ENGLISH
Model 2901
Package Includes;
1 - Waterproof Fire Safe
1 - Operation Manual
2 - Override Access Keys
1 - Mounting Kit
1 - Removable Shelf
4 - Shelf Clips
1Waterproof Fire Safe
Please carefully check the above list to confirm all items have been received.
If any items are missing, please contact Consumer Assistance. (see page 10 for contact information).
1Operation
Manual
2 - Override
Access Keys
1Mounting
Hardware
4 - Shelf Clips
Read this manual carefully and never store it inside the safe!
1 - Removable
Shelf
DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our
Consumer Assistance Department by telephone. Store will not accept returned products
without prior authorization. You must first contact our Consumer Assistance Department
(See page 10 for contact information).
SAFE IDENTIFICATION RECORD
Safe Model #
Safe Serial #
Override Access Key #
User Code
LOCATING SAFE IDENTIFICATION NUMBERS
Safe Serial #
Located on the bottom right corner of the safe door frame (Figure 1).
Override Access Key #
Engraved on the Head of the key (Figure 2).
Cylinder #
Engraved on the lock cylinder (Figures 3).
Figure 1 Figure 2 Figure 3
PRODUCT REGISTRATION
Please go to the following webpage to register your product:
www.hymaninc.com/product-registration/
INDEX
WELCOME ......................................................................................PAGE 1
PROPER SAFE USE .......................................................................PAGE 1
CARE AND MAINTENANCE .........................................................PAGE 1
INTERIOR MOISTURE WARNING ...............................................PAGE 2
GETTING STARTED.........................................................................PAGE 2
INSTALL BATTERIES .....................................................................PAGE 2
TESTING DIGITAL LOCK ..............................................................PAGE 3
PROGRAMMING NEW USER CODE ..........................................PAGE 3
TESTING NEW USER CODE ........................................................PAGE 3
LOCKING AND UNLOCKING .......................................................PAGE 4
ANCHORING SAFE TO A FLOOR.................................................PAGE 5
SECURE LOCKOUT PERIOD .......................................................PAGE 7
LOST OR FORGOTTEN USER CODES .......................................PAGE 7
OVERRIDE ACCESS KEY ................................................................PAGE 7
REMOVABLE SHELF .......................................................................PAGE 7
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS .............PAGE 8
LOCATING SAFE IDENTIFICATION NUMBERS .......................PAGE 8
CONSUMER ASSISTANCE ..........................................................PAGE 10
WARRANTY ....................................................................................PAGE 11
WELCOME
Your Honeywell Waterproof Fire Safe will provide years of safe and secure protection for
your valuables, important documents and other personal items. All Honeywell safes are
designed and built using the highest manufacturing standards to ensure maximum user
satisfaction under a variety of conditions. With proper care, your Honeywell safe will provide
“Peace of Mind” for many years to come.
Thank you and enjoy!
PROPER SAFE USE
Honeywell Waterproof Fire Safes are designed to protect paper documents and files from
heat and moisture damage due to exposure to fire and water.
Fire Protection
Independent testing verified the interior temperature remains below 350º F (177ºC) for
thirty minutes when outside temperature is up to 1550ºF (843ºC).
Water Protection
Independent testing verified that the interior remains dry when completely submerged
for up to 8 hours with up to 50mm of water above the safe.
IMPORTANT: Before using your new safe, it should be opened and aired out for at
least 30 minutes to allow the waterproof seal to decompress and perform as intended.
WARNING: This safe is not intended for the storage of medications, pearls, firearms,
ammunition, or combustible items of any kind.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to
ensure optimum performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have
excessive dirt, debris or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild
cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe
dry and NEVER use abrasive cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or
documents and valuable possessions into an air-tight container before storing them in
your safe. Avoid placing your safe in areas of high humidity. For optimum performance,
the safe should be opened and aired out for at least 30 minutes every two weeks.
1
INTERIOR MOISTURE WARNING
IMPORTANT: For optimum performance, Waterproof Fire Safes should be opened and aired
out for at least 30 minutes every two weeks to prevent any build up of moisture inside. It is
recommended to occasionally do this for longer periods. This will balance the humidity difference
inside and outside and allow any excess moisture trapped inside to escape. If you do not open
Waterproof Fire Safes on a regular basis to let them air out, you may begin to notice a musty
smell, especially on paperwork. The manufacturer will not be responsible for any damage or loss of
items placed in Waterproof Fire Safes due to moisture. Proper care and preventative maintenance
of Waterproof Fire Safes is the owner’s responsibility. The owner should understand that this is
required to assure continued levels of protection and trouble-free performance during the lifetime.
GETTING STARTED
1. Slide the override key cover up (Figure 1).
2. Insert the override access key into the lock (Figure 2).
3. With the key inserted, turn clockwise to the right (Figure 3).
4. Turn handle to the right and pull safe door open (Figure 4).
5. Turn key counterclockwise to return to locked position (Figure 5).
6. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock, leave safe door open, and proceed to “Install Batteries”.
IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE
SAFE WILL REMAIN UNLOCKED (FIGURE 5)
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
INSTALL BATTERIES
The batteries must be installed before using your safe. The battery compartment is inside the safe
and opened by lifting the tab located at the bottom.
1. Remove battery compartment cover (Figure 1).
2. Insert 4 “AA” batteries. Make sure that the batteries are installed in the correct direction (+ and -)
with regard to polarity (Figure 2).
3. Replace the battery cover (Figure 3).
4. Leave the door open and proceed to the “Testing Digital Lock” section on next page.
Figure 1
Figure 2
Figure 3
2
Loading...