Honeywell 1900 EZ User Manual

1

1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
New Jersey 07666

Programming Your Honeywell Xenon 1900 EZ ID Scanner

2

1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
New Jersey 07666

This document will show you how to program your Honeywell Xenon 1900 EZ ID Scanner to
read barcodes the way they are formatted in your Corner Store POS database.

Most of your products have UPC-A barcodes that have 12 digits with 10 digits in the middle,
one in the front and one at the end. Here’s an example:

Other products have UPC-E barcodes that have 8 digits with 6 in the middle, one in the front
(usually a zero) and one at the end. Here’s an example:

3

1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
New Jersey 07666

All of these codes and more are found in the Honeywell Xenon 1900 EZ ID Scanner user manual
found here:

http://www.honeywellaidc.com/CatalogDocuments/Xenon-UG%20Rev%20E.pdf

Reset to factory defaults (usually not necessary)

1. Remove Custom Defaults

2. Activate Defaults

Carriage Return (simulates Enter key) - Use this if when you scan a barcode, you have to press
enter to get the item # onto the invoice grid