MOBILE LOCKER
https://www.supplychimp.com
Model 1550
Mobile Locker
PACKAGE CONTENTS
1 – Mobile Locker
1 – Operation Manual
1 – Tether cable
1 – ID Tag
1 – Removable shelf
PRODUCT OVERVIEW
A - Mobile Locker body
B - ID tag
C - Mobile Locker door
D - Combination dial
Model 1550
DO NOT RETURN MOBILE LOCKER
TO STORE!
For missing parts or difficulty operating your Mobile
Locker, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without
prior authorization. You must first contact our
consumer assistance department.
E - Open/Close latch
F - Charger cord hole
G - Tether cable hole
H - Pull-out shelf
I - Tether secure knob
Read this manual carefully and never store it inside the Mobile Locker!
CAUTION!
OUTDOOR USE RESTRICTION
Although this item is great for securing personal items, it is not designed to be
waterproof or to protect the contents from any other outdoor elements. Do not place
Mobile Locker where rain or water spray can get to it and do not place in standing
water.
1
SETUP & OPERATION
https://www.supplychimp.com
OPEN THE MOBILE LOCKER AND RESET PASSCODE
The preset factory Entry Code is “0000”
MODEL 1550 - ATTACHING SECURITY CABLE
1. Set the dial so that it displays “0000”.
1
2. Rotate locking latch to the open position and
pull door open.
2
3. To program a new Personal Entry Code,
Locate the switch on the back of the locker
door and set it to the “Set Code” position.
3
4. Set the number dials on the front of the door
to your new 4-digit Personal Entry Code and
return the switch on the rear of the door to the
“On” position.
IMPORTANT: If your Personal Entry Code i
s forgotten, entry into the Mobile
4
Locker cannot be done without damaging the unit. Therefore, it is
recommended to use a code that will be easily remembered like a birthdate.
IMPORTANT: Make a note of your new Entry Code and store in a safe place.
1. Un-screw the tether secure knob and
remove the tether cable by pulling it
through the hole.
2. Wrap cable around object and back
through looped end.
3. Re-insert the tether through the hole
and attach using the tether secure knob.
4. Close and lock the Mobile Locker.
1
2
3
4
__ __ __ __
To re-open your Mobi
Entry Code instead of “0000”.
SETUP & OPERATION CONTINUED
LOCK THE MOBILE LOCKER:
1. Push the door closed and rotate locking
latch downward into the locked position.
2. Set dials back to “0000” to complete locking
procedure.
le Locker repeat steps 1-2 using your new Personal
ID TAG USE
1. Write phone number and name
on ID tag
2
2. Insert ID tag in slot on the
inside of the door
3
3. Information will be visible
through front window
Loading...