Honda XR 600R Service Manual Kapitel02
Specifications and Main Features
- Applicable Volume of Oil:
- At the time of installing the engine assembly – 2.3 liters (2.4 U.S. qt., 2.0 Imp qt)
- After the oil has been changed – 1.9 liters (2.0 U.S. qt., 1.7 Imp qt)
- With an oil and oil filter single change- 1.95 liters (2.06 U.S. qt., 1.72 Imp qt)
- Oil Requirement: Honda 4-Stroke Oil or other equivalent oil class
- API Service Code: SE or SF
- Available Grade: SAE 10W—40 or 20W—50
- Oil Pump Output:
- Pump A: 7.5 liters (7.9 U.S. qt)/min at 5300 min⁻¹
- Pump B: 10.0 liters (10.6 U.S. qt)/min at 5300 min⁻¹
- Torque Values:
- Crankcase drain plug: 25 N-m (2.5 kg-m, 18 ft-lb)
- Downtube drain plug: 40 N-m (4.0 kg-m, 29 ft-lb)
- Strainer nut: 55 N-m (5.5 kg-m, 40 ft-lb)
- Oil inlet hose joint nut: 40 N-m (4.0 kg-m, 29 ft-lb)
- Oil outlet hose joint nut: 40 N-m (4.0 kg-m, 29 ft-lb)
- Oil filter cover bolts: 9 N-m (0.9 kg-m, 7 ft-lb)
- Oil Pump Parameters*:
- Oil pump tip clearance: 0.15 mm (0.006 in) max, 0.20 mm (0.008 in) service limit
- Oil pump body clearance: 0.15 to 0.21 mm (0.006 to 0.008 in), 0.25 mm (0.010 in) service limit
- Clearance between oil pump end: 0.02—0.08 mm (0.001—0.003 in), 0.12 mm (0.005 in) maximum service limit
Frequently Asked Questions
- To operate this device, which oil should I buy?
- Honda 4-Stroke Oil or equivalent bearing an API Service Classification listed as SE or SF. And the SAE viscosity has to be 10W—40 or 20W-50.
- How many liters would be enough to change the oil?
- In case you want to change the oil, you will have to acquire 1.9 litres (2.0 U.S. qt., 1.7 Imp qt).
- What is the capacity of the oil pump?
- At 5,300 rpm, Pump A provides 7.5 liters (7.9 U.S. qt) per minute whereas Pump B offers the same output of around 10 litres (10.6 U.S. qt).
- What is the replacement schedule for the oil?
- According to the manufacturer’s servicing plan, the oil replacement is also scheduled when it reaches the minimum level in the dipstick or during a crankcase change and cleaning cycle.
- Can you list the indicators that show low oil pressure?
- Indicators of low oil pressure comprise low oil levels or normal oil consumption alongside external oil leaks and oil pump failures.
- Which measures should I take in the scenario that I detect oil leaking?
- Leaked oil can be a result of head gasket failure or infrequent oil changes and has to be remedied without delay.
- What procedure should one use to determine how much engine oil is there?
- One way to check how much oil is in an engine is to start it and let it idle for a few minutes, and then stopping it, after which the oil level is checked by inserting the cap/dipstick into the filler neck until the threads touch it, without screwing it in.
- What should the torque values be for drain plugs?
- The torque values for crankcase drain plugs should be 25 N-m while those of downtube drain plugs should be set to 40 N-m.
User Manual
Loading...