Honda CB1100 (2017), CB1100NA (2017), CB1100CA (2017) Owner's Manual
20161019161055_32MGC6500_eng_BOOK Page 1 Wednesday, October 19 2016 16:12:26 JST
This manual should be considered a permanent part of the
motorcycle and should remain with the motorcycle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any
obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner’s manual may not match your
actual vehicle.
© 2016 Honda Motor Co., Ltd.
20161019161055_32MGC6500_eng_BOOK Page 2 Wednesday, October 19 2016 16:12:26 JST
Welcome
Congratulations on your purchase of a new
Honda motorcycle. Your selection of a
Honda makes you part of a worldwide family
of satisfied customers who appreciate
Honda's reputation for building quality into
every product.
To ensure your safety and riding pleasure:
● Read this owner's manual carefully.
● Follow all recommendations and
procedures contained in this manual.
● Pay close attention to safety messages
contained in this manual and on the
motorcycle.
● The following codes in this manual
indicate each country.
● The illustrations here in are based on the
CB1100CA ED type.
Country Codes
Code Country
CB1100CA
ED European direct sales
E UK
CB1100NA
ED European direct sales
E UK
*The specifications may vary with each locale.
20161019161055_32MGC6500_eng_BOOK Page 3 Wednesday, October 19 2016 16:12:26 JST
A Few Words About Safety
Your safety, and the safety of others, is very
important. Operating this motorcycle safely is
an important responsibility.
To help you make informed decisions about
safety, we have provided operating
procedures and other information on safety
labels and in this manual. This information
alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to
warn you about all hazards associated with
operating or maintaining a motorcycle. You
must use your own good judgement.
You will find important safety information in a
variety of forms, including:
● Safety labels on the motorcycle
●
Safety Messages preceded by a safety alert
symbol and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
3DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
3CAUTION
You CAN be HURT if you don’t follow
instructions.
Other important information is
provided under the following titles:
NOTICE
Information to help you avoid
damage to your motorcycle,
other property, or the
environment.
20161019161055_32MGC6500_eng_BOOK Page 4 Wednesday, October 19 2016 16:12:26 JST
Contents
Motorcycle Safety P. 2
Operation Guide P. 16
Troubleshooting P. 89
Maintenance P. 41
Information P. 112
Specifications P. 125
Index P. 128
20161019161055_32MGC6500_eng_BOOK Page 5 Wednesday, October 19 2016 16:12:26 JST
Motorcycle Safety
This section contains important information for safe riding of your motorcycle.
Please read this section carefully.
Safety Guidelines................................................. P. 3
Image Labels......................................................... P. 6
Safety Precautions............................................. P. 10
Riding Precautions ............................................ P. 11
Accessories & Modifications........................... P. 14
Loading ................................................................ P. 15
20161019161055_32MGC6500_eng_BOOK Page 6 Wednesday, October 19 2016 16:12:26 JST
Safety Guidelines
Safety Guidelines
Follow these guidelines to enhance your safety:
● Perform all routine and regular inspections
specified in this manual.
● Stop the engine and keep sparks and flame
away before filling the fuel tank.
● Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide in
exhaust gases is toxic and can kill you.
Always Wear a Helmet
It's a proven fact: helmets and protective
apparel significantly reduce the number and
severity of head and other injuries. So always
wear an approved motorcycle helmet and
protective apparel. 2 P. 10
Before Riding
Make sure that you are physically fit, mentally
focused and free of alcohol and drugs. Check
that you and your passenger are both wearing
an approved motorcycle helmet and protective
apparel. Instruct your passenger on holding
onto the grab rail or your waist, leaning with
you in turns, and keeping their feet on the
footpegs, even when the motorcycle is stopped.
Take Time to Learn & Practice
Even if you have ridden other motorcycles,
practice riding in a safe area to become familiar
with how this motorcycle works and handles,
and to become accustomed to the motorcycle's
size and weight.
Ride Defensively
Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
evasive maneuver.
Continued
Motorcycle Safety
3
20161019161055_32MGC6500_eng_BOOK Page 7 Wednesday, October 19 2016 16:12:26 JST
Safety Guidelines
Make Yourself Easy to See
Motorcycle Safety
Make yourself more visible, especially at night,
by wearing bright reflective clothing, positioning
yourself so other drivers can see you, signaling
before turning or changing lanes, and using
your horn when necessary.
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
inattention can impair your ability to use good
judgement and ride safely.
Don't Drink and Ride
Alcohol and riding don't mix. Even one alcoholic
drink can reduce your ability to respond to
changing conditions, and your reaction time
gets worse with every additional drink. Don't
drink and ride, and don't let your friends drink
and ride either.
4
Keep Your Honda in Safe Condition
It's important to keep your motorcycle properly
maintained and in safe riding condition.
Inspect your motorcycle before every ride and
perform all recommended maintenance. Never
exceed load limits (2 P. 15), and do not modify
your motorcycle or install accessories that
would make your motorcycle unsafe (2 P. 14).
If You are Involved in a Crash
Personal safety is your first priority. If you or
anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
assistance if needed. Also follow applicable laws
and regulations if another person or vehicle is
involved in the crash.
20161019161055_32MGC6500_eng_BOOK Page 8 Wednesday, October 19 2016 16:12:26 JST
Safety Guidelines
If you decide to continue riding, first turn the
ignition switch to the (Off) position, and
evaluate the condition of your motorcycle.
Inspect for fluid leaks, check the tightness of
critical nuts and bolts, and check the handlebar,
control levers, brakes, and wheels. Ride slowly
and cautiously.
Your motorcycle may have suffered damage
that is not immediately apparent. Have your
motorcycle thoroughly checked at a qualified
service facility as soon as possible.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, a
colourless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and
may lead to death.
If you run the engine in confined or even partly
enclosed area, the air you breathe could
contain a dangerous amount of carbon
monoxide.
Never run your motorcycle inside a garage or
other enclosure.
3WARNING
Running the engine of your motorcycle
while in an enclosed or even partially
enclosed area can cause a rapid buildup of toxic carbon monoxide gas.
Breathing this colourless, odorless gas
can quickly cause unconsciousness and
lead to death.
Only run your motorcycle's engine
when it is located in a well ventilated
area outdoors.
Motorcycle Safety
5
20161019161055_32MGC6500_eng_BOOK Page 9 Wednesday, October 19 2016 16:12:26 JST
Image Labels
Image Labels
Motorcycle Safety
Read instructions contained in Owner's
The following pages describe the label
meanings. Some labels warn you of potential
hazards that could cause serious injury.
Others provide important safety information.
Read this information carefully and don't
remove the labels.
If a label comes off or becomes hard to read,
contact your dealer for a replacement.
There is a specific symbol on each label.
The meanings of each symbol and label are
as follows.
Manual carefully.
Read instructions contained in Shop Manual
carefully. In the interest of safety, take the
motorcycle to be serviced only by your
dealer.
DANGER (with RED background)
You WILL be KILLED or SERIOUSLY HURT if
you don't follow instructions.
WARNING (with ORANGE background)
You CAN be KILLED or SERIOUSLY HURT if
you don't follow instructions.
CAUTION (with YELLOW background)
You CAN be HURT if you don't follow
instructions.
6
20161019161055_32MGC6500_eng_BOOK Page 10 Wednesday, October 19 2016 16:12:26 JST
Image Labels
BATTERY LABEL
DANGER
• Keep flame and spark away from the battery.
Battery produce explosive gas that can cause
explosion.
• Wear the eye protection and rubber gloves when
handling the battery, or you can get burned or
lose your eyesight by the battery electrolyte.
• Do not allow children and other people to touch a
battery unless they understand proper handling
and hazards of the battery very well.
• Handle the battery electrolyte with extreme care as
it contains dilute sulfuric acid. Contact with your
skin or eyes can burn you or cause loss of your
eyesight.
• Read this manual carefully and understand it
before handling the battery. Neglect of the
instructions can cause personal injury and damage
to the motorcycle.
• Do not use a battery with the electrolyte at or
below the lower level mark. It can explode causing
serious injury.
Continued
Motorcycle Safety
7
20161019161055_32MGC6500_eng_BOOK Page 11 Wednesday, October 19 2016 16:12:26 JST
Image Labels
Motorcycle Safety
8
ACCESSORIES AND LOADING WARNING LABEL
WARNING
ACCESSORIES AND LOADING
• The safety stability and handling of this motorcycle may be
affected by the addition of accessories and luggage.
• Read carefully the instructions contained in user's manual
and installation guide before installing any accessory.
• The total weight of accessories and luggage added to rider's
and passenger's weight should not exceed 173 kg (381 lb),
which is the maximum weight capacity.
• The luggage weight must not exceed 10 kg (22 lb) under
any circumstances.
The fitting of large fork-mounted or large handlebar
•
mounted fairing is not recommended.
20161019161055_32MGC6500_eng_BOOK Page 12 Wednesday, October 19 2016 16:12:26 JST
Image Labels
or
TYRE INFORMATION & DRIVE CHAIN LABEL
Cold tyre pressure:
[Driver only]
Front 250 kPa (2.50 kgf/cm2, 36 psi)
Rear 290 kPa (2.90 kgf/cm2, 42 psi)
[Driver and passenger]
Front 250 kPa (2.50 kgf/cm2, 36 psi)
Rear 290 kPa (2.90 kgf/cm2, 42 psi)
Keep chain adjusted and lubricated.
Freeplay 25 - 35 mm (1.0 - 1.4 in)
SAFETY REMINDER LABEL
For your protection, always wear helmet, protective
apparel.
FUEL LABEL
Unleaded petrol only
ETHANOL up to 10 % by volume
Motorcycle Safety
9
20161019161055_32MGC6500_eng_BOOK Page 13 Wednesday, October 19 2016 16:12:26 JST
Safety Precautions
Safety Precautions
Motorcycle Safety
● Ride cautiously and keep your hands on the
handlebar and feet on the footpegs.
● Keep passenger's hands onto the grab rail
or your waist, passenger's feet on the
footpegs while riding.
● Always consider the safety of your
passenger, as well as other drivers and
riders.
Protective Apparel
Make sure that you and any passenger are
wearing an approved motorcycle helmet, eye
protection, and high-visibility protective
clothing. Ride defensively in response to
weather and road conditions.
Helmet
#
Safety-standard certified, high-visibility, correct
size for your head.
●
Must fit comfortably but securely, with the
chin strap fastened.
10
● Face shield with unobstructed field of vision
or other approved eye protection.
3WARNING
Not wearing a helmet increases the
chance of serious injury or death in a
crash.
Make sure that you and any passenger
always wear an approved helmet and
protective apparel.
Gloves
#
Full-finger leather gloves with high abrasion
resistance.
Boots or Riding Shoes
#
Sturdy boots with non-slip soles and ankle
protection.
Jacket and Trousers
#
Protective, highly visible, long-sleeved jacket and
durable trousers for riding (or a protective suit).
20161019161055_32MGC6500_eng_BOOK Page 14 Wednesday, October 19 2016 16:12:26 JST
Riding Precautions
Riding Precautions
Running-in Period
During the first 500 km (300 miles) of running,
follow these guidelines to ensure your
motorcycle's future reliability and performance.
● Avoid full-throttle starts and rapid
acceleration.
● Avoid hard braking and rapid down-shifts.
● Ride conservatively.
Brakes
Observe the following guidelines:
●
Avoid excessively hard braking and
downshifting.
u Sudden braking can reduce the
motorcycle's stability.
u Where possible, reduce speed before
turning; otherwise you risk sliding out.
● Exercise caution on low traction surfaces.
u The tyres slip more easily on such
surfaces and braking distances are
longer.
● Avoid continuous braking.
u Repeated braking, such as when
descending long, steep slopes can
seriously overheat the brakes, reducing
their effectiveness. Use engine braking
with intermittent use of the brakes to
reduce speed.
● For full braking effectiveness, operate both
the front and rear brakes together.
Continued
Motorcycle Safety
11
20161019161055_32MGC6500_eng_BOOK Page 15 Wednesday, October 19 2016 16:12:26 JST
Riding Precautions
Anti-lock Brake System (ABS)
#
Motorcycle Safety
This model is equipped with an Anti-lock Brake
System (ABS) designed to help prevent the
brakes from locking up during hard braking.
● ABS does not reduce braking distance. In
certain circumstances, ABS may result in a
longer stopping distance.
● ABS does not function at speeds below 10
km/h (6 mph).
● The brake lever and pedal may recoil slightly
when applying the brakes. This is normal.
● Always use the recommended front/rear
tires and sprockets to ensure correct ABS
operation.
12
Engine Braking
#
Engine braking helps slow your motorcycle
down when you release the throttle. For further
slowing action, downshift to a lower gear. Use
engine braking with intermittent use of the
brakes to reduce speed when descending long,
steep slopes.
Wet or Rainy Conditions
#
Road surfaces are slippery when wet, and wet
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet
conditions.
If the brakes get wet, apply the brakes while
riding at low speed to help them dry.
20161019161055_32MGC6500_eng_BOOK Page 16 Wednesday, October 19 2016 16:12:26 JST
Riding Precautions
Parking
● Park on a firm, level surface.
● If you must park on a slight incline or loose
surface, park so that the motorcycle cannot
move or fall over.
● Make sure that high-temperature parts
cannot come into contact with flammable
materials.
● Do not touch the engine, muffler, brakes
and other high-temperature parts until they
cool down.
● To reduce the likelihood of theft, always lock
the handlebar and remove the key when
leaving the motorcycle unattended.
Use of an anti-theft device is also
recommended.
Parking with the Side Stand or Centre
#
Stand
1.
Stop the engine.
2.
Using the side stand
Push the side stand down.
Slowly lean the motorcycle to the left until its
weight rests on the side stand.
Using the centre stand
To lower the centre stand, stand on the left
side of the motorcycle. Hold the left handle
grip and the left grab rail. Press down on the
tip of the centre stand with your right foot
and, simultaneously, pull up and back.
3.
Turn the handlebar fully to the left.
u Turning the handlebar to the right
reduces stability and may cause the
motorcycle to fall.
4.
Turn the ignition switch to the (Lock)
position and remove the key. 2 P. 34
Continued
Motorcycle Safety
13
20161019161055_32MGC6500_eng_BOOK Page 17 Wednesday, October 19 2016 16:12:26 JST
Accessories & Modifications
Refuelling and Fuel Guidelines
Motorcycle Safety
Follow these guidelines to protect the engine,
fuel system and catalytic converter:
● Use only unleaded petrol.
● Use recommended octane number. Using
lower octane petrol will result in decreased
engine performance.
● Do not use fuels containing a high
concentration of alcohol. 2 P. 123
● Do not use stale or contaminated petrol or
an oil/petrol mixture.
● Avoid getting dirt or water in the fuel tank.
14
Accessories &
Modifications
We strongly advise that you do not add any
accessories that were not specifically designed
for your motorcycle by Honda or make
modifications to your motorcycle from its
original design. Doing so can make it unsafe.
Modifying your motorcycle may also void your
warranty and make your motorcycle illegal to
operate on public roads and highways. Before
deciding to install accessories on your
motorcycle be certain the modification is safe
and legal.
20161019161055_32MGC6500_eng_BOOK Page 18 Wednesday, October 19 2016 16:12:26 JST
Loading
3WARNING
Improper accessories or modifications
can cause a crash in which you can be
seriously hurt or killed.
Follow all instructions in this owner's
manual regarding accessories and
modifications.
Do not pull a trailer with, or attach a sidecar to,
your motorcycle. Your motorcycle was not
designed for these attachments, and their use
can seriously impair your motorcycle's handling.
Loading
● Carrying extra weight affects your
motorcycle's handling, braking and stability.
Always ride at a safe speed for the load you
are carrying.
● Avoid carrying an excessive load and keep
within specified load limits.
Maximum weight capacity 2 P. 125
● Tie all luggage securely, evenly balanced
and close to the centre of the motorcycle.
● Do not place objects near the lights or the
muffler.
3WARNING
Overloading or improper loading can
cause a crash and you can be seriously
hurt or killed.
Follow all load limits and other loading
guidelines in this manual.
Motorcycle Safety
15
20161019161055_32MGC6500_eng_BOOK Page 19 Wednesday, October 19 2016 16:12:26 JST
Parts Location
CB1100CA
Rear brake fluid reservoir (P.71)
Operation Guide
Rear suspension spring
preload adjuster
(P.87
)
Battery (P.58)
Air cleaner (P.69)
Front brake fluid reservoir (P.71)
Front suspension spring preload
adjuster
(P.86
Front brake lever (P.85)
Throttle grip (P.82)
Right side cover (P.62)
Engine oil fill cap (P.65)
Engine oil filter (P.67)
Engine oil drain bolt (P.67)
Engine oil level inspection window
)
(P.65
Rear brake pedal
)
16
20161019161055_32MGC6500_eng_BOOK Page 20 Wednesday, October 19 2016 16:12:26 JST
Clutch lever (P.85)
Data link
connector
Crankcase breather (P.83)
Clutch fluid reservoir (P.81)
Front suspension spring
preload adjuster
(P.86
)
Fuel fill cap (P.37)
Main fuse (P.111)
FI fuse (P.111)
Fuse box (P.110)
Seat (P.61)
Left side cover (P.62)
Shift lever (P.36)
Drive chain (P.75)
Rear suspension spring
preload adjuster
(P.87
)
Side stand (P.74)
Centre stand
Continued
Operation Guide
17
20161019161055_32MGC6500_eng_BOOK Page 21 Wednesday, October 19 2016 16:12:26 JST
Parts Location (Continued)
CB1100NA
Rear brake fluid reservoir (P.71)
Operation Guide
Rear suspension spring
preload adjuster
(P.87
)
Battery (P.58)
Air cleaner (P.69)
Front brake fluid reservoir (P.71)
Front suspension spring preload
adjuster
(P.86
Front brake lever (P.85)
Throttle grip (P.82)
Right side cover (P.62)
Engine oil fill cap (P.65)
Engine oil filter (P.67)
Engine oil drain bolt (P.67)
Engine oil level inspection window
)
(P.65
Rear brake pedal
)
18
20161019161055_32MGC6500_eng_BOOK Page 22 Wednesday, October 19 2016 16:12:26 JST
Clutch lever (P.85)
Data link
connector
Crankcase breather (P.83)
Clutch fluid reservoir (P.81)
Front suspension spring
preload adjuster
(P.86
)
Fuel fill cap (P.37)
Main fuse (P.111)
FI fuse (P.111)
Fuse box (P.110)
Seat (P.61)
Left side cover (P.62)
Rear suspension spring
preload adjuster
(P.87
)
Shift lever (P.36)
Drive chain (P.75)
Side stand (P.74)
Centre stand
Operation Guide
19
20161019161055_32MGC6500_eng_BOOK Page 23 Wednesday, October 19 2016 16:12:26 JST
Instruments
Operation Guide
Tachometer
NOTICE
Do not operate the engine in
the tachometer red zone.
Speedometer
This shows your speed in kilometer per
hour (km/h) and/or miles per hour
(mph) depending on vehicle type.
Excessive engine speed can
adversely affect engine life.
Tachometer red zone
(excessive engine rpm range)
20
20161019161055_32MGC6500_eng_BOOK Page 24 Wednesday, October 19 2016 16:12:26 JST
Gear position indicator
The gear position is shown in the gear position indicator.
u “ ” flashes when the transmission is not shifted properly.
Fuel gauge
Remaining fuel when only 1st (E) segment starts flashing
approximately: 4.3 L (0.9 US gal, 0.95 Imp gal)
At the same time, the available driving distance and
remaining fuel displays can be selected.
(P.25
)
If the fuel gauge indicator flashes in a repeat pattern or turns off: (P.94)
Display Check
When the ignition switch is turned to the (On) position, all the modes and digital
segments will show. If any part of these displays does not come on when it should,
have your dealer check for problems.
Operation Guide
Continued
21
20161019161055_32MGC6500_eng_BOOK Page 25 Wednesday, October 19 2016 16:12:26 JST
Instruments (Continued)
Operation Guide
A-button
B-button
Clock (12-hour display)
To set the clock
Odometer [TOTAL] & Tripmeter [TRIP A/B] & Fuel mileage meter & Fuel
consumption meter
A-button selects the odometer, tripmeter A, tripmeter A average fuel mileage, tripmeter A
fuel consumption, tripmeter B, tripmeter B average fuel mileage, tripmeter B fuel
consumption and current fuel mileage.
● Odometer: Total distance ridden.
● Tripmeter: Distance ridden since tripmeter was reset (press and hold A-button to reset to
0.0 km/mile depending on vehicle type. At the same time it will reset the average fuel
mileage and fuel consumption).
22
(P.27
)
20161019161055_32MGC6500_eng_BOOK Page 26 Wednesday, October 19 2016 16:12:26 JST
Odometer Tripmeter A
Tripmeter A average
fuel mileage
Operation Guide
Tripmeter A fuel
consumption
Current fuel
mileage
Tripmeter B fuel
consumption
Available driving
distance
Amount of
remaining fuel
Tripmeter B average
fuel mileage
Tripmeter B
Press A-button
Press A-button when the fuel
gauge 1st (E) segment is flashing
When the fuel gauge 1st (E) segment is
flashing, display moves to the available
driving distance.
Continued
23
20161019161055_32MGC6500_eng_BOOK Page 27 Wednesday, October 19 2016 16:12:26 JST
Instruments (Continued)
The average fuel mileage and fuel
consumption will be based on each tripmeter
A and tripmeter B.
Operation Guide
Average fuel mileage
#
Average fuel mileage since each tripmeter A
and tripmeter B was reset. It display “ ”
after resetting each tripmeter A and
tripmeter B.
When “ ” is displayed in other cases, go to
your dealer for service.
Fuel consumption
#
Total fuel consumption since each tripmeter
A and tripmeter B was reset. When “ ” is
displayed, go to your dealer for service.
To reset the average fuel mileage and
#
fuel consumption: (P.22)
Current fuel mileage
#
Current instant mileage. If your speed is less
than 7 km/h (5 mph) or immediately after
ignition switch is turned to the (On) position,
“ ” is displayed.
When “ ” is displayed at speeds above 7
km/h (5 mph), go to your dealer for service.
24
20161019161055_32MGC6500_eng_BOOK Page 28 Wednesday, October 19 2016 16:12:26 JST
Available driving distance
#
When the 1st (E) segment of the fuel gauge is
flashing (P.21) , the estimated available
driving distance can be selected. When the
amount of remaining fuel becomes less than
1.0 litre, “ ” will be indicated. The indicated
available driving distance is by calculation
depending on the driving conditions, and the
indicated figure may not always be the actual
allowable distance. When the fuel gauge is
near to E or when E segment blinks, fill fuel
promptly.
Remaining fuel
#
When the 1st (E) segment of the fuel gauge is
flashing (P.21) , the estimated amount of
remaining fuel can be selected. When the
amount of remaining fuel becomes less than
1.0 litre, “ ” will be indicated. The amount of
remaining fuel is calculated from the driving
conditions. The indicated amount of
remaining fuel may be different from the
actual amount. When the fuel gauge is near
to E or when E segment blinks, fill fuel
promptly.
Continued
Operation Guide
25
20161019161055_32MGC6500_eng_BOOK Page 29 Wednesday, October 19 2016 16:12:26 JST
Instruments (Continued)
Display Setting
You can adjust the display settings.
● Clock setting
Operation Guide
● HISS setting
E type only
●
● Changing of fuel mileage units
Press and hold A-button and B-button
Press B-button
Changing of mileage units
Ordinary display
Clock setting
HISS setting
Changing of mileage units
Changing of fuel mileage units
In addition, to return to the ordinary display
at display setting, turn the ignition switch to
the (Off) position and then (On) position,
adjustment will be set.
Adjustment will be cancelled if the button is
not pressed for about 30 seconds, unless
each display setting was pre-set individually.
26
20161019161055_32MGC6500_eng_BOOK Page 30 Wednesday, October 19 2016 16:12:26 JST
e
Clock setting:
a
Turn the ignition switch to the (On)
position.
b
Press and hold A-button and B-button until
Press A-button until the desired minute is
displayed.
u Press and hold to advance the minute
fast.
the hour digits start flashing.
f
Press B-button. The clock is set, and the
c
Press A-button until the desired hour is
display moves to HISS setting.
displayed.
u
Press and hold to advance the hour fast.
d
Press B-button. The minute digits start
flashing.
Operation Guide
Continued
27
Loading...