Hobart W32 Installation Manual

O

P

E

R

A

T

O

R

HAND WRAP
STATION

MODEL

W3-2C ML-44105, ML-26331
W3-2 ML-44103, ML-26320
625A ML-44069

701 S. RIDGE AVENUE

TROY, OHIO 45374-0001

937 332-3000

www.hobartcorp.com FORM 25177 (May 2005)

OPERATION AND CARE OF

MODEL 625A, W3-2, AND W3-2C WRAP STATIONS

GENERAL

The 625A, W3-2, and W3-2C are hand wrapping stations for use with PVC films. The hand wrapping
stations accommodate 1 or 2 rolls of PVC stretch wrap film (3” diameter core) up to 20” wide.

Film is cut by a heated cut-off rod which melts the film on contact. Packages are sealed with the
thermostatically controlled hot plate if applicable.

Adjustable feet (W3-2 and W3-2C only) provide leveling, stability, and/or minor height adjustment.

625A

Table top unit with 6" x 15" hot plate.

Single roll of film with a capacity 12 to 20 inches.

© HOBART 2005 - 2 -

W3-2

Floor unit with up to 2 rolls of film with a capacity 12 to 20 inches.

Optional 6" x 15" hot plate (not shown).

Optional side shelves (not shown).

- 3 -

W3-2C

Floor unit with 8" x 15" hot plate.

Up to 2 rolls of film with a capacity 12 to 20 inches.

Optional side shelves (not shown).

- 4 -