Hobart VS9 General Manual
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
VS9 VEGETABLE SLICER,
MEAT CHOPPER ATTACHMENT
AND MIXER ACCESSORIES
9" VEGETABLE SLICER
One of the most useful Hobart Attachments is the
VS9 Vegetable Slicer.
It will more than double the utility of a Hobart Mixer
or Food Cutter. Its uses are many and varied:
cutting cabbage for salads and cole slaw, slicing
potatoes ranging in thickness from that of a potato
chip to 5⁄8". Slicing nuts, bananas, cucumbers,
celery and other vegetables and fruits, shredding or
grating cheese, raw carrots, beets, etc.
The food is sliced by stainless steel scimitar
knives for fast clean, uniform cutting. The front of
the Vegetable Slicer is hinged at one side, and
can be swung aside or removed, permitting quick
and easy changing of plates and cleaning.
The Vegetable Slicer Attachment includes back
case, hopper front and adjustable slice plate.
Shredder and grater plates (interchangeable with
slice plate).
The 9" Vegetable Slicer may also be used with the
PD-35 or PD-70 Power Drive units.
PD35 – For use with cheese and vegetables.
PD70 – For use with vegetables only
SHREDDER AND GRATER PLATES FOR
Adjustable Slice
Plate - 5⁄8" to
very thin.
3
⁄32" Shredder Plate
3
⁄16" Shredder Plate
9" VEGETABLE SLICER
Plate Holder
Assembly
5
⁄16" Shredder Plate
5
⁄16" Shredder Plate
VS9 VEGETABLE SLICER, MEAT CHOPPER ATTACHMENT AND MIXER ACCESSORIES
Grater Plate
MEAT AND FOOD CHOPPER
Turn meat and food trimmings into croquettes, meat
patties or sausage with the
use of this attachment. No
kitchen should be without this
important piece of equipment.
Hobart-designed, protective
type spiral uted chopping-end
worm provides clean cutting
action. There is no crushing or
mashing of product; its natural color
9" VEGETABLE
SLICER
F-39985 – VS9 Vegetable Slicer, Meat Chopper Attachment and Mixer Accessories Page 1 of 2
and avor are retained.
VS9 VEGETABLE SLICER,
MEAT CHOPPER ATTACHMENT
AND MIXER ACCESSORIES
ADDITIONAL ACCESSORIES FOR HOBART MIXERS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
A wide selection of practical attachments and
accessories for Mixers further increase their broad
range of usefulness. These attachments meet specic
needs and are constructed to operate with continued
reliability.
BOWL SPLASH COVER
This is used to control splash of light ingredients
during mixing operations.
BOWL EXTENSION RING
BOWL TRUCK
Self-centering, with four rubber-tired wheels for easy
portability when moving large bowls for oor model
mixers.
BOWL SCRAPER
The scraper is used in conjunction with the B Beater or
Provides higher sidewalls for the bowl to prevent
throw-out of certain ingredients. Does not increase
bowl capacity.
BOWL TRUCK ADAPTER
For use with 30 and 40-quart bowl sizes of oor
model mixers. Inserts easily into the standard bowl
truck.
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 2 of 2 F-39985 – VS9 Vegetable Slicer, Meat Chopper Attachment and Mixer Accessories
F-39985 (REV. 08/08) LITHO IN U.S.A. (H-01)
Wire Whips. While the agitator is mixing the product,
the scraper is continuously scraping the inside of the
mixer bowl. No more stopping mid-cycle to manually
scrape down the sides of the bowl. The bowl scrapers
are built to last and are made of urethane elastomer.
The optional bowl scraper is available for the following
models: HL120, HL200, D300, D340, HL600, HL800
and HL1400.
NOTE: Bowl scrapers should be used with Stainless
Steel Bowls only.
Loading...