Hobart FT-818, FTM-818, FT-820, FTM-820, FT-822 Specifications

FOOD EQUIPMENT

Qty. Item No.

FT -800 SERIES

DISHW ASHER

FT-800 SERIES
DISHWASHER WITH
ELECTRO­MECHANICAL
CONTROLS

OUTSTANDING
STANDARD FEATURES

• Energy saving low water
consumption design—5.7 GPM
Hot Water (180°F); 3.9 GPM
Low Temp (140°F).

• Stainless steel construction
including frame, legs, feet, drain
piping, wash arms.

• Electro-mechanical controls in
top mounted stainless steel
control center.

• 36" Load/Unload height.

• Energy efficient convertible hot
water or low temp/chemical
sanitizing.

• Door actuated drain closers.

• Sealed dial type thermometers
for wash—power rinse—final
rinse—temperature indication.

• Water and energy saving
design through reduced water
and tank heat usage and
automatic pump shut down
control through conveyor.

• Common water, drain, electric
and steam connections.

• Exclusive load end flush
system.

• Built-in integral wiring channel.

• Automatic temperature control
and positive low-water heater
and pump seal protection.

• Built-in inherent motor overload
protection with manual reset.

• Built-in vent ducts—dampers
and drip control.

• Improved washability with high
pressure prewash—wash and
power rinse systems.

• Compct modular design.

• 115 volt pilot circuit.

• Lower prewash arm.

• Automatic initial fill.

• Wash arms easily installed and
removed without tools.

• All function components
(motors, drains, etc.) located
on operators side of dish­machine for accessibility and
ease of maintenance.

• Built-in integral prewash water
replenishment system.

• Final rinse actuator.

• Removable self-flushing stain­less steel strainer pans and
large deep scrap buckets for
each tank.

• Door interlocks on all doors.

• Optional energy saving blower­dryer.

Electric 20 KW—63% energy

reduction.

Steam 75 lbs./hr.—56%

energy reduction.

• Choice of electric, steam
injection or steam coil heat.

Specifications, Details, Dimensions and
Connections inside.

FT -800 SERIES
DISHW ASHER

FOOD EQUIPMENT

STANDARD DESIGN FEATURES

TOP MOUNTED CONTROL PANEL –

Controls in top-mounted stainless steel control
center with master On/Off Power Switch.

STOP/START PUSH BUTTONS – Recessed, side located waterproof Start/Stop push
buttons and flip-up hinged dishware platform on both ends of dishwasher.

WASH ARMS – Computer-designed prewash,
wash and power rinse arms. Arms designed so
they can be installed only in correct position.

FLUSH DOWN –

Exclusive load end
flush down system.

DRAIN CLOSERS – Door operated drain
closers . . . front located drains, stainless steel
tank overflow tubing to prewash, and final
rinse water feed piping.

PUMP – Self-draining Hobart pump motors
with inherent motor protection and manual
overload reset push buttons on each motor.

FOOD EQUIPMENT

Qty. Item No.

FT -800 SERIES

DISHW ASHER

WIRING CHANNEL – Built-in integral wireway above tank water level.

SCRAP PANS – Large one-piece sloped

scrap screens and deep removable recessed
scrap buckets for prewash, wash and power
rinse tanks.

VENT DUCTS – Built-in vent ducts with
adjustable dampers and drip shield on each
end of dishwasher. 2" x 24" load end and
4" x 24" discharge end (inside dimensions).

POSITIVE LOW WATER PROTECTION –

Solid state positive low water protection for
tank heaters.