Hobart C-44A General Manual

Item # ________________________________ Quantity_______________________________
C.S.I. Section 11400
WAREWASH/WASTE
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
MANUALLY FED
MACHINE HP 120/208(3W)/ 120/240(3W)/
LX18, 18C LX18H LX30 LX30C, 40C, GC LX30H, 40H, GH &
LX30C w/Booster
AM14T, 14TC & 14F
(5000W)
AM14T, 14TC & 14F 2 26.1 15.3 10.5 6.8
MODEL HP VOLT/HZ/PH AMP COMMENT
SM6T2
UW-50 5 Steam 20.3 17.6 9.2
120/60/1 208/60/1 240/60/1
3
4 13.3 7.6 7.6 N/A N/A 13.9 7.9
3
4 N/A 41.3 36.8 41.3 36.8 N/A 37.1
3
4 14.4 14.8 13.9 14.8 13.9 13.9 14.2
3
4 15.3 14.8 13.9 14.8 13.9 13.9 14.2
3
4 N/A 43.6 38.9 43.6 38.9 N/A 39.2
(Electric Heat - connection included)
HP
2 67.4 44.9 26.8 13.5
HP
1
2 120/60/1 6.0 Separate 1KW electric heat connection
HP HEAT 208V 240V 480V
120V 208-240V 208-240V 480V
120V 208-240V 208-240V 480V
ALL SINGLE POINT ELECTRICAL CONNECTION
Electric-10KW/Booster-14KW 89.2 79.9 40.4
Gas/Electric Booster-14KW 60.3 52.3 26.4
1 PHASE 3 PHASE
(Steam or Gas Heat)
1 PHASE 3 PHASE
Electric-10KW 50.3 46.2 23.5
Gas 21.4 18.6 9.6
60/1 60/1
AMPERE RATINGS
1 PHASE
100/50/1 220-240/50/1
F-7984 – Warewash/Waste Ampere Ratings Page 1 of 4
WAREWASH/WASTE AMPERE RATINGS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
RACK CONVEYOR (C-LINE-A)
MODEL HP (MOTOR)
1
C-44A, C-44AW, C-54A, C-44B, C-44BW
CRS-66A, CRS-66AW, CCS-66A CCS-66AW, CRS-76A, CCS-76A
6 Conveyor
2 Wash
1
6 Conveyor
2 Wash 22.1 14.5 8.4 7.4 1 Prewash
1
6 Conveyor
1 PHASE 208-240V 208-240V 480V 600V
15.5 11.1 6.8 5.9
3 PHASE
2 Wash 22.1 14.5 8.4 7.4
CPW80A, CPW-80AW, CPW-90A
1 Prewash
1
6 Conveyor
2 Wash 24.6 16.8 9.4 8.3 2 Prewash
1
6 Conveyor
C-64A, C-88A, C-64W, C-88W 2 Wash 24.6 16.8 9.4 8.3
2 Rinse
1
CRS-86A, CCS-86A, CRS-110A, CCS-110A 2 Wash CRS-86W, CCS-86W, CRS-110W, CCS-110W 2 Rinse
6 Conveyor
31.2 20.2 11.0 9.5
1 Prewash
1
6 Conveyor
CPW-100A, CPW-124A, CPW-100W, CPW-124W
2 Wash 2 Rinse 1 Prewash
1
6 Conveyor
2 Wash 2 Rinse
31.2 20.2 11.0 9.5
33.7 22.5 12.0 11.6
2 Prewash * C-Line-A Blower/Dryer 2 Blower 5.5 2.7 2.2 * C-Line-A Condenser
1
2 Condenser 3.5 2.2 1.1 .7
* C-Line-W (Dual Rinse) 31.3 18.6 7.8 6.2
* This chart presents the machine nameplate total for the motor(s) and control by model. When ordered with electric heat, a separate service connection is required for the wash tank electric heater
and a separate service connection is required for the power rinse tank electric heater. Add to the machine nameplate current the rated current of the dryer and/or condenser(s) when these options are ordered. When the C-Line-W (Dual Rinse) is ordered, a separate service connection is required for the Dual Rinse section.
FASTRACK (FR, FRC, FRC-A) Contact factory for total ampere rating for these machines. Proposed system must be clearly defined for accurate ampere value.
FLIGHT TYPE (FT)
MODEL HP
208-240V 480V 600V
3 PHASE
FT900 91/2 29.9 17.5 14.8 FT900S 61/2 22.1 13.6 11.7 *FT900 DRYER 3 8.4 4.1 3.3
*Add dryer ampere ratings to 900 series for total ampere value. Single phase motors are not available with any FT.
FT900 or FT900S are provided with a service connection for the motors and controls. Two additional service connections are provided for the two tanks when electric heat is specified. A separate service connection is also required when an electric blower dryer is specified. An electric booster requires a separate service connection when one is specified.
Page 2 of 4 F-7984 – Warewash/Waste Ampere Ratings
Loading...
+ 2 hidden pages