StarBoard BT-2G
User's Guide
BT2G-061101
How to Request a User's Guide
When requesting a separate copy of this user's guide, specify
BT2G-061101.
Read this user's guide and carefully retain it for future reference.
Before using this product, carefully read and fully understand the
safety instructions.
Store this user's guide nearby for ease of reference.
WEEE (For EU only)
"The mark (bin mark) is in compliance with the Waste Electrical and Electronic Equipment Directive
2002/96/EC (WEEE)."
"The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but
use the return and collection systems available"
As for details, please verify the product home page.
WEEE (Für EU nur)
“Die Markierung (Symbol mit der Mülltonne) entspricht der Verordnung 2002/96/EC für
Elektroschrott (Waste Electrical and Electronic Equipment Directive 2002/96/EC, WEEE).”
“Die Markierung bedeutet, dass das Zubehör NICHT im unsortierten Hausmüll entsorgt werden
darf, sondern den verfügbaren Sammelstellen für eine fachgerechte Entsorgung zugeführt werden
muss.“
Sie finden detaillierte Informationen hierzu auf der Homepage des Produkts.
WEEE (Pour UE seulement)
“Le symbole représenté ci-dessous est conforme à la directive 2002/96/EC (WEEE)”.
“Ce symbole indique l’obligation de ne pas mettre cet équipement au rebut avec les déchets
ménagers ordinaires et d’utiliser les circuits de ramassage et de recyclage disponibles”.
Pour plus de détails, veuillez vérifier la page d’accueil du produit.
WEEE (Per UE solamente)
“Il contrassegno (contrassegno del raccoglitore) è conforme alla direttiva Rifiuti di apparecchiature
elettriche 2002/96/EC (WEEE)”.
“Il contrassegno indica il requisito NON smaltire l’apparecchiatura come rifiuti urbani non
differenziati, ma utilizzare i sistemi di raccolta e di restituzione disponibili”.
Per quanto riguarda i dettagli, visitare la home page del prodotto.
WEEE (Para UE sólo)
“La marca (marca de la papelera) es conforme a la Directiva de residuos de equipos eléctricos y
electrónicos (Waste Electrical and Electronic Equipment Directive (WEEE)) 2002/96/EC.”
“La marca indica que NO se deben desechar estos equipos como residuos municipales no
separables, sino que se deben utilizar los sistemas de devolución y recogida disponibles.”
Para obtener información detallada, consulte la página web del producto.
WEEE (Para UE só)
“A marca (marca do caixote de lixo) está em conformidade com a Directiva de Eliminação de
Equipamentos Eléctricos e Electrónicos 2002/96/EC (WEEE)”.
“A marca indica a obrigatoriedade de NÃO eliminar o equipamento como dejectos municipais não
triados, mas sim utilizar os sistemas de devolução e recolha disponíveis”.
Para mais informações, consulte o site da Internet do produto.
The R&TTE Directive (For EU only)
The manufacturer (WALTOP International Corp.) hereby declare that this equipment Bluetooth Pen
Pad- Flying Pad, BT-2G, model RSK-T06 is in compliance with the essential requirements and other
relevant provisions of Directive 1995/5/EC.
FCC Warning
The user is cautioned that changes and modifications made to the equipment without approval of
the manufacturer could void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
(For US and Canada only)
FCC Notice (For US and Canada only)
This device complies with part 15 of the FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, (2) this device must
accept any interference received, including interference that may cause undesired operation.
Canadian Regulatory Wireless Notice (For Canada only)
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment that is installed outdoors is
subject to licensing.
The term "IC" before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
Avis sur la réglementation canadienne en matière de communication sans fil
(Pour Canada seulement)
L'utilisation est sujette aux deux conditions suivantes: (1) Cet appareil ne doit causer aucune
interférence préjudiciable, (2) Cet appareil doit accepter toute interférence à laquelle il est soumis, y
compris l'interférence pouvant causer un fonctionnement indésirable.
Pour éviter le brouillage radio du service autorisé, cet appareil est conçu pour fonctionner à
l'intérieur et à l'écart des fenêtres pour assurer un effet d'écran maximal. Un permis est nécessaire
pour installer un appareil à l'extérieur.
Les lettres "IC" devant le numéro de certification/enregistrement signifient simplement que
l'appareil répond aux spécifications techniques d'Industrie Canada.
StarBoard BT-2G
User’s Guide
How to Request a User’s Guide
When requesting a separate copy of this user’s guide, specify BT2G-061101.
Read this user’s guide and carefully retain it for future reference.
Before using this product, carefully read and fully understand the safety instructions.
Store this User’s Guide nearby for ease of reference.
BT2G-061101
Hitachi Software Engineering Co., Ltd.
StarBoard BT
-2G
Notices
Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited.
The contents of this manual are subject to change without prior notice.
Every effort has been made to ensure that this manual is complete and correct. However, should
any questionable points, mistakes, etc., come to your attention, please inform the vendor.
Please be advised in advance that this company will assume no responsibility for losses, etc.,
resulting from the operation of this product, regardless of the preceding clauses.
Disclaimers
Hitachi Software Engineering Co., Ltd. assumes no liability and makes no warranty, either
express or implicit, regarding the contents of this user’s guide.
Also, the company makes no warranty as to the product’s suitability, merchantability or fitness
for a particular intended use.
All products of Hitachi Software Engineering Co., Ltd., described in this user’s guide are
presently for sale or are site-licensed.
Users who purchased the aforesaid product(s) will bear the costs of all required services, repairs,
and damages resulting from defects in this product, and will bear the costs of direct or indirect
damages (including the loss of profits or required information) that resulted from the product
defects.
Moreover, Hitachi Software Engineering Co., Ltd., retains the right to revise this user’s guide
and to modify the contents thereof, without any obligation to notify anyone.
1
English
-2G
StarBoard BT
Product Assurance Provisions
This product is limited to use in the country where the user bought this product.
For warranty details, refer to Appendix 5.3 at the end of this user’s guide.
This first edition of the user’s guide (BT2G-061101) is for the following products:
RSK-T06 (StarBoard BT-2G AH00144)
The StarBoard BT-2G incorporates WALTOP’s 7.5-inch tablet integrated digitizer and Bluetooth
technology.
Windows 2000, Windows XP are trademarks of Microsoft Corporation (U.S.) and in other
countries.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Waltop International Corporation is under license. Other trademarks and trade names
are those of their respective owners.
Manual Creation Dates
November 2006, First Edition BT2G-061101
All Rights Reserved. Copyright © 2006, Hitachi Software Engineering Co., Ltd.
2
English
-2G
StarBoard BT
Safe Handling
Safe Handling
Markings and Symbols
Various markings and symbols are used in this user’s guide and on this product, to ensure the
safe and correct use of this product and to prevent personal injury and property damage. These
symbols and their meanings are as explained below. Understand the information well before
reading the body of the user’s guide.
WARNING
This symbol indicates the presence of potential dangers that, if ignored or
applied incorrectly, could lead to death or serious injury.
CAUTION
This symbol indicates the presence of potential dangers that, if ignored or
applied incorrectly, could lead to slight or moderate injury.
CAUTION
This symbol indicates the presence of potential dangers that, if ignored or
applied incorrectly, could lead to damage to surrounding property.
This symbol draws attention to cautions (including warnings).
This symbol indicates something prohibited.
This symbol indicates something that must be done.
3
English
-2G
StarBoard BT
Safety Precautions
Safe Handling
Always comply with them.
CAUTION
Do not use this product near water.
Electric shock might result.
Do not place a heavy object on the Tablet
and USB cable, heat or pull it.
The tablet and USB cable might be
damaged, causing fire or electric
shock.
Do not use this product in a location with
high temperature or high humidity or
leave it in direct sunlight.
The tablet and other parts might be
damaged.
Be careful about the locations of the USB
cable, etc.
The USB cable might trip someone,
possibly causing the product to fall,
etc., thereby causing injury or
product failure. Be careful with their
locations.
Do not leave this product or any of its
accessories on the floor.
Someone might step on it and
break it, or might be injured by
tripping on it.
Do not dispose the equipment as unsorted
municipal waste, but use the return and
collection systems available.
Contact your dealer for details.
4
English
-2G
StarBoard BT
Careful thought was given to the cautions on this device and in this user’s guide. However,
unanticipated circumstances might occur. When operating this product, users themselves must
exercise caution as well as follow instructions.
CAUTION
Warning Details Page
Safe Handling
Be sure to orient the battery correctly.
Do not reverse the + and - terminals of the battery, and use only the
specified type of battery. Otherwise, it will overheat and fail.
P.2-1
When changing the battery, be careful not to close the pen's
rear part too forcefully.
If too much force is applied when closing the rear part of the stylus pen, the
pen may be damaged.
P.2-5
5
English
-2G
StarBoard BT
Contents
Contents
1. Introduction ................................................................................................. 1-1
1.1 Parts Check ......................................................................................................... 1-1
1.2 Part Names and Functions .................................................................................. 1-2
1.2.1 Front Side of the tablet.............................................................................................. 1-2
1.2.2 Back side of the tablet............................................................................................... 1-3
2. Usage Procedures ........................................................................................2-1
2.1 How to use tablet ................................................................................................ 2-1
2.1.1 Changing the battery in the tablet.............................................................................. 2-1
2.1.2 Basic Tablet operation............................................................................................... 2-2
2.2 Using the Stylus Pen........................................................................................... 2-3
2.2.1 How to use Stylus Pen............................................................................................... 2-3
2.2.2 Basic Stylus Pen Operations...................................................................................... 2-4
2.2.3 Stylus Pen Settings.................................................................................................... 2-4
2.2.4 Changing the battery in the stylus pen ...................................................................... 2-5
2.2.5 Replacing the Stylus Pen Tip..................................................................................... 2-6
3. Setup Software............................................................................................. 3-1
3.1 Install Bluetooth tablet manager......................................................................... 3-1
3.2 Install WIDCOMM Bluetooth Software............................................................. 3-2
3.3 Bluetooth connection setup................................................................................. 3-4
3.4 Tablet settings ..................................................................................................... 3-7
4. How to connect and disconnect BT-2G...................................................... 4-1
4.1 Bluetooth Mode .................................................................................................. 4-1
4.2 USB Mode .......................................................................................................... 4-2
5. Appendix ...................................................................................................... 5-1
5.1 Troubleshooting.................................................................................................. 5-1
5.2 System Specifications......................................................................................... 5-3
5.3 Provisions of Product Warranty.......................................................................... 5-4
6
English
G
StarBoard
BT-2
1. Introduction
1.1 Parts Check
After unpacking, make sure that all of the following parts are included.
Parts
No. Name Qty.
(1) 7.5-inch Bluetooth/USB Tablet 1
(2) Stylus pen 1
(3) AAA alkaline battery 1
(4) Spare pen tips 2
(5) Pen tip replacement pin set 1
(6) USB cable 1
(7) Bluetooth adapter 1
(8) AA NiMH rechargeable battery 4
(9) Battery charger 1
(10) StarBoard BT-2G Setup Software (CD-ROM) 1
(11) StarBoard BT-2G Quick Start Guide 1
(1)
(2)
(3)
Introduction
(4)
(5)
(9)
(6)
(10)
(7)
(11)
1-1
(8)
English
G
StarBoard
BT-2
1.2 Part Names and Functions
1.2.1 Front Side of the tablet
(3)
(2)
(1) Tablet active area
Receives text and graphical
information entered with the stylus
pen, and transmits the data to a PC.
(2) Function keys
Twelve functions can be assigned to
these keys. (For details on function
keys initial settings, see “3.4 Tablet
settings” on page 3-7 of this User’s
Guide.)
Introduction
(5)
(4)
(1)
(3) LED indicator
Red/Blue LED are built in for
indicating the status of the tablet. (For
details on LED indicator, see "2.1.2
Basic Tablet operation" on page 2-2 of
this User's Guide.)
(4) Disconnect button
Keep pressing this button 5 seconds or
longer to disconnect between Tablet
and PC.
(5) Pen holder
1-2
English
G
StarBoard
1.2.2 Back side of the tablet
1.2.3 Side of the tablet
BT-2
(1) Battery holder
Insert 2 Ni-MH AA batteries to the
holder.
(2)
(1) ON/OFF switch
This button turns the tablet
ON/OFF.
(1)
(2) USB port
A USB cable is connected here when
using Wired mode.
Introduction
(1)
1-3
English
G
StarBoard
BT-2
English
G
StarBoard
BT-2
Usage Procedures
2. Usage Procedures
This section describes the basic procedures for using StarBoard.
2.1 How to use tablet
This section describes how to use the tablet.
2.1.1 Changing the battery in the tablet
The tablet contains 2 AA Ni-MH batteries. If the LED indicator is solid red, change the
batteries as described below. Note that battery life is approximately 24 hours under
normal usage.
(1) Open the battery cover in the backside of the tablet.
(2) Remove the AA Ni-MH batteries contained in the battery cover, and insert full-
charged cells as described below.
(3) Close the battery cover.
Be sure to orient the battery correctly.
If too much force is applied when closing the rear part of the stylus pen, the pen may be
damaged.
CAUTION
BT-2G tablet locations
Keep the following points in mind when installing the StarBoard.
・Avoid leaving tablet and stylus pen in locations that are dusty, extremely hot, cold, or
humid. Also avoid leaving in locations exposed to direct sunlight.
2-1
English
G
A
StarBoard
2.1.2 Basic Tablet operation
BT-2
(1) Tablet active area
Tablet active area is inside of the rectangle line on the tablet. The active area and
the display resolution are automatically corresponded. If they are not suited,
please reboot the PC.
(2) Function keys
There are 12 function keys on top of the tablet active area. You can assign
applications, documents or URL. To assign the function, uses "Bluetooth Pen Pad
Manager".
* Function keys work only when you hold the pen for 1.5seconds.
(3) LED indicator
There are 2 LED's build into the tablet. These LED's indicate current condition of the
tablet.
- Bluetooth mode
1. When tablet is turned on, 2 LED's will flash once.
2. When the battery power is low, the red LED will be solid. In this
case, please change the batteries.
ctive area
Press and hold 1.5 seconds to work.
Usage Procedures
2-2
English
G
StarBoard
3. The blue LED will blink continuously during connecting to PC.
4. The blue LED will be solid when the pen is detected within active area.
- USB mode
1. When USB cable is initially connected to the tablet, the red LED will
flash once and the blue LED will blink continuously.
2. The blue LED will be solid when the pen is detected within active area.
Condition
Power on Flash once Flash once
USB cable plugged Blink
Connecting Blink
Pen tip on active
area of the tablet
Pen within active
area (not touched)
Low battery Off Solid
.
BT-2
Bluetooth Mode USB Mode
Blue LED Red LED Blue LED Red LED
Off Blink
continuously
Off Off Off Off
Solid Off Solid Off
2.2 Using the Stylus Pen
This section describes how to use the StarBoard stylus pen.
2.2.1 How to use Stylus Pen
The stylus pen has a ON/OFF switch. Battery life can be prolonged by ON/OFF the
switch. To use the stylus pen, set the power switch of the stylus pen to the ON position.
ON/OFF switch
Usage Procedures
Flash once
continuously
Off
continuously
2-3
English
G
p
StarBoard
2.2.2 Basic Stylus Pen Operations
・Clicking
・Double-clicking
・Dragging
2.2.3 Stylus Pen Settings
BT-2
The stylus pen can be used in the same way as a mouse. Under the stylus pen’s default
settings, the pen tip button is set to correspond to the left mouse button. When Windows
is open, the pen tip button may be used to perform the following mouse actions.
Press the pen tip against the tablet operating area with a suitable amount of force and
then release it quickly.
Press the pen tip against the tablet operating area with a suitable amount of force and
then release it, two times in a row.
Press the pen tip against the tablet operating area with a suitable amount of force and
then move the pen while keeping it pressed against the tablet operating area (without
releasing it from the tablet operating area).
The permitted stylus pen input angle range is 30° in any direction from a position where
the stylus pen is perpendicular to the tablet operating area. Note that if the pen is tilted at
an angle greater than 30°, its coordinates may not be input correctly.
The stylus pen has one pen tip button, and two side buttons. Mouse actions can be
assigned to these three buttons. The default button settings are summarized in the
following table.
Usage Procedures
Button User action Corresponding mouse action
Pen tip Press the pen tip against the tablet operating
area
Side Button
No.0
Side Button
No.1
Press the button with the pen tip slightly
removed from the tablet operating area
(5 mm or less)
Same as above Mouse right-click
Pen ti
2-4
Mouse left-click
Mouse left double-click
Side Button No.1
Side Button No.0
English
G
g
StarBoard
2.2.4 Changing the battery in the stylus pen
When changing the battery, be careful not to close the pen’s rear part too
forcefully.
If too much force is applied when closing the rear part of the stylus pen, the pen may be
dama
BT-2
The stylus pen contains a single AAA alkaline battery. If the pen begins to operate
erratically (e.g., if pen input is cut off), change the battery as described below. Note that
battery life is approximately 1800 hours under normal usage.
(1) Turn the stylus pen grip to separate the two halves.
(2) Remove the AAA alkaline battery contained in the grip, and insert a new cell with the
positive side facing the pen tip.
(3) Put the stylus pen back together.
ed.
-
+
-
+
CAUTION
Usage Procedures
2-5
English
G
StarBoard
2.2.5 Replacing the Stylus Pen Tip
BT-2
When the stylus pen tip wears down and becomes too short, replace it as described
below.
(1) Using the special pin set, remove the stylus pen tip.
(2) Insert a new pen tip into the stylus pen.
Usage Procedures
2-6
English
G
StarBoard
BT-2
Setup Software
3. Setup Software
Before starting installation, tablet and stylus pen needs to be ready.
(1) Insert batteries to the tablet and the stylus pen.
(2) Power on the stylus pen.
(3) Power on the tablet and keep pressing the "disconnect" button 5seconds or longer.
3.1 Install Bluetooth tablet manager
(1) Insert "StarBoard BT-2G Setup Software" CD to PC.
(2) After the menu appears, click "Bluetooth Pen Pad Driver". and tablet manager will
be installed automatically.
(3) Start "Bluetooth Pen Pad" automatically. Click "Next". Then, Bluetooth/USB
tablet manager will be installed.
(4) After installation, CD will be ejected.
Keep pressing 5seconds or longer.
3-1
English
G
StarBoard
BT-2
Setup Software
3.2 Install WIDCOMM Bluetooth Software
(1) Insert "StarBoard BT-2G Setup Software" CD to PC again.
(2) Click "Bluetooth Dongle Driver" and install WIDCOMM Bluetooth Software.
(3) Start "WIDCOMM Bluetooth Software" automatically. Click "Next".
(4) License Agreement appears. Read the license agreement, and if you accept, select
"I accept the terms in the license agreement" then click "Next".
(5) Set the installed folder and click "Next".
3-2
English
G
StarBoard
(6) Installation is ready to start. Click "Install".
(7) If "Driver Signature Notice" appears on the screen, click "OK".
(8) After "Bluetooth device not found" message appears, plug the Bluetooth adapter to
USB port.
(9) Click "Finish" to close the window.
(10) If the installation normally completed, Bluetooth icon will be shown in system
tray.
BT-2
Bluetooth Icon
Setup Software
3-3
English
G
StarBoard
The Bluetooth icon in system tray indicates the Bluetooth adapter status.
Status Enabled Disabled Connected
Bluetooth
Icon
BT-2
Blue circle with
White logo
Blue circle with
Red logo
Blue circle with
Setup Software
Green logo
3.3 Bluetooth connection setup
(1) Double click "My Bluetooth Places" Icon on desktop.
(2) "Initial Bluetooth Configuration Wizard" is appeared on the screen. Click "Next".
(3) Give your computer as Device Name. Then, click "Next".
(4) Turn to configure the Bluetooth services. Click "Next".
3-4
English
G
StarBoard
(5) Choose the Bluetooth services that you would like to use. Then click "Next".
(6) Click "Skip". (Please don't click "Next" in this procedure.)
(7) Initial setting is finished. USB adapter is ready to be used. Click "Finish" to close
the window.
(8) Double click "My Bluetooth Places" Icon on desktop again, for pairing between
tablet and adapter.
(9) Click "Find Bluetooth Devices" for searching and connect to nearby Bluetooth
enabled devices.
If searching finished correctly, you can find the icon "Hitachi
Pen Pad".
BT-2
Setup Software
3-5
English
G
StarBoard
(10) Double click "Hitachi Pen Pad" And click "Yes". After "Confirmation Required"
window appears, click "click here" button by stylus pen. (It takes sometime to
recognize the tablet driver.)
(11) If the "Hitachi Pen Pad" icon appears as shown below, BT-2G is connected and
ready to use.
BT-2
Setup Software
3-6
English
G
StarBoard
BT-2
3.4 Tablet settings
BT-2G is worked by "Bluetooth Pen Pad manager". When click icon on task tray,
Bluetooth Pen pad window will appear.
Setup Software
(1) About
(2) Buttons
(3) Function Key
- Unit
To indicate the active area by inch or cm.
- Tracking Mode
*Pen (Absolute)
The active area corresponds to the
whole area of the screen.
*Mouse (Relative mode)
Acts like a mouse, moves in relation to
where the mouse pointer currently is.
- Side Button 1, 2
Each side button can be allocated a
mouse action from pull down menu.
- Default
This button can reset the settings.
- F1-12
Each function keys can assign APP,
document, or URL. For details on how to
assign the function key, see ”2.1.2 (2)
functon keys” on page 2-2 of this User’s
Guide.)
3-7
English
-2G
StarBoard BT
English
G
StarBoard
BT-2
How to connect and disconnect BT-2G
4. How to connect and disconnect BT-2G
4.1 Bluetooth Mode
If you would like to use BT-2G in the case which needs to connect in wireless, please
connect BT-2G and PC as follows.
Connect
(1) Power on the Tablet.
(2) Keep pressing "disconnect" button 5seconds or longer.
(3) Connect Bluetooth adapter to the PC.
(4) Follow "3.3 Bluetooth connection setup" on page 3-4 in this manual.
Disconnect
(1) Double click "My Bluetooth Places" Icon on desktop.
(2) Click "Find Bluetooth Devices" for searching nearby Bluetooth enabled or
connected devices.
(3) Double click connected "Hitachi Pen Pad" icon.
(4) "Bluetooth Connection Status" window will appear. Click "Disconnect". And
safely disconnect BT-2G.
PC
(3)
(1)
BT-2G
(2)
4-1
English
G
StarBoard
Connecting environment
* The receiving quality of the tablet may be influenced by environment. The best
environment for the tablet is where no other cordless products are functioning, such as
microwave ovens.
* Cement walls and wooden walls absorb radio wave and decrease receiving quality. Open
space without barriers is the best environment for the tablet.
BT-2
How to connect and disconnect BT-2G
4.2 USB Mode
If you would like to use BT-2G in the case which needs to connect as USB wired, please
connect BT-2G and PC as follows.
Connect
(1) Connect the USB cable to the tablet.
(2) Connect the USB cable to the PC and ready to use.
* USB mode is powered by USB bus power. No batteries are needed.
Disconnect
(1) Disconnect the USB cable from PC.
(2) Disconnect the USB cable from the tablet.
PC
(2)
BT-2G
(1)
4-2
English
G
StarBoard
BT-2
5. Appendix
5.1 Troubleshooting
First, check adjustments and handling methods and check for poor cable connections.
Those are often the causes of problems when nothing is actually broken.
Connection problems (Wireless)
In this case Check this And do this
BT-2G does not work.
Is the Bluetooth adapter
connected to the PC
properly?
Was system setup done in
the proper order?
Software may be damaged
or did not install correctly.
Are there any wireless
devices located nearby
BT-2G such as cordless
phone, video transmitters, or
radio transmitters?
Are there any electronic
devices located nearby
BT-2G such as microwave
ovens or radio transmitters
that emit electromagnetic
noise?
Were the batteries
full-charged?
If it is connected properly, LED light
on. Otherwise, please unplug and
replug the Bluetooth adapter.
Setup system in proper order. (For
details on how to setup the system,
see ”3. Setup Software” on page 3-1 of
this User’s Guide.)
Uninstall the related software, and then
reinstall. (For details on how to setup
the system, see ”3. Setup Software” on
page 3-1 of this User’s Guide.)
Bluetooth uses 2.4GHz unlicensed ISM
band. Other wireless devices may
caused unstable connection. So use the
BT-2G away from other wireless
devices.
This product is susceptible to
electromagnetic noise, so use the
StarBoard away from devices that emit
noise.
If the battery is not charged enough,
BT-2G may not work properly. Change
the full-charged batteries.
Appendix
Other Contact technical support.
Connection problems (Wired)
In this case Check this And do this
BT-2G does not work.
Is the USB cable connected
properly?
Is the Bluetooth Pen Pad
Manager installed correctly?
Other Contact technical support.
5-1
Check connection of USB cable.
BT-2G needs Bluetooth Pen Pad
Manager to work the tablet.
English
G
StarBoard
Stylus pen-related problems
Stylus pen does not operate.
BT-2
In this case Check this And do this
Appendix
Is battery worn out? Replace stylus pen battery.
(For details on how to change the
battery, see “2.2.4 Changing the
Battery in the Stylus Pen” on page 2-5
of this User’s Guide.)
Is pen tip worn down? Check if the pen tip is worn down or
is too short.
(For details on how to replace the
stylus pen tip, see “2.2.5 Replacing
the Stylus Pen Tip” on page 2-6 of this
User’s Guide.)
Other
Restart Windows and StarBoard
Software.
Contact technical support.
5-2
English
G
StarBoard
BT-2
5.2 System Specifications
Item Specification
Product name StarBoard BT-2G
Model No RSK-T06 (StarBoard BT-2G AH00144)
Tab let
characteristics
Bluetooth
adapter
conditions
OS Required Windows 2000/XP
Software Required (tablet) Bluetooth Pen pad driver version 3.14 or higher
* Battery life varies depending on the temperature and humidity of the usage environment.
** Distance varies depending on the usage environment.
Input system Electromagnetic induction
Interface
(Bluetooth)
(USB)
Effective area size 6 x 4.5 inches (152 mm (W) x 114mm (H))
External dimensions 239mm (W) x 251mm (H) x 30mm (D)
Function button(s) 12 (hold to 1.5seconds to work)
Tracking speed Approximately 162 points/183 points (Bluetooth/USB) per second
Power supply
(Bluetooth)
(USB)
Battery life(Ni-MH) 24 hours (Continuous use) *
Weight (w/batteries) 493g (545g)
Pen Stylus pen
Model No. BTU02HG (class II)
Standard Bluetooth 2.0 + EDR
Interface USB 2.0
RF range up to 40m (limited condition)**
Power supply USB bus power (LED indicator for checking power status)
External dimensions 58.5mm (W) x 17mm (H) x 8 mm (D)
Weight 6.8g
Temperature During use: +5 – +35°C in storage: -20 – +60°C Environmental
Humidity During use: 30 – 80% (no condensation); in storage: 20 – 85% (no
Bluetooth 1.2 (class II)
USB 1.1 Full speed
1.2V AA battery x 2 (Rechargeable battery suggested)
USB bus power (no batteries needed)
(Uses one AAA alkaline battery; battery life: approximately
1800 hours**)
condensation)
(adapter) Bluetooth software version 5.0.1.1600 ROM
(StarBoard Software) version 7.1 or higher
Appendix
5-3
English
G
StarBoard
BT-2
5.3 Provisions of Product Warranty
1. During the free warranty service period, if a malfunction occurs during normal use, the
malfunction will be corrected without charge, according to the provisions of the warranty.
Furthermore, if the customer registration card accompanying the warranty is not returned
to our company, the customer information will not be registered, so free repairs might be
unavailable. After receiving this product, please immediately fill out and return this
customer registration card.
2. The warranty coverage is as listed in the following table:
Product Name Part Name Warranty Coverage
BT-2G + StarBoard
Stylus pen +
Bluetooth adapter +
Battery charger +
Replacement tip for Stylus pen –
Other parts –
Legend: + Covered by warranty (excluding wear and physical damage)
3. Please refer to the warranty about this product’s warranty service period.
4. Even during the warranty period, there will be a repair charge in the following cases:
(1) If the registration card accompanying the warranty is not returned to our company.
(2) If the warranty is not presented.
(3) If specified fields on the registration card accompanying the warranty are not
(4) The warranty applies only to the original purchasers. (It does not apply to a third
(5) In the event of a malfunction or damage resulting from the customer’s improper
(6) In the event of problems resulting from handling contrary to the handling and
(7) In the event of failure or damage resulting from abnormal voltages, pollution or
(8) In the event of a malfunction in this product caused by the connection to this
(9) In the event that there is no abnormality in this product, but a defect in a part other
– Not covered by warranty
completed, or if the wording has been changed without authorisation.
party to whom the customer resold this product.)
handling (e.g., a fall, impact, etc., caused by the customer during transportation or
movement).
precautions mentioned in this user’s guide.
other natural disasters (e.g., fire, earthquake, lightning).
product of equipment other than the equipment specified by our company.
than this product was detected or remedied.
Appendix
5-4
English
G
StarBoard
5. If this product malfunctions, review the contents of this user’s guide. If the problems
6. As a rule, the customer is responsible for shipping charges required to send all or part of
7. This warranty does not cover labour fees for repair-associated equipment assembly or
8. Incidental damage caused by the failure of this product (e.g., loss of profit that should
9. The aforementioned provisions define this warranty, and they supersede those of all
BT-2
(10) In the event of ordinary wear and tear, wear, deterioration, etc., of consumables,
even during normal use.
remain irreparable, contact technical support. Technical support will determine whether
or not the product must be repaired, so please contact them. If the customer sends the
product to our company without RMA (Return Merchandise Authorisation) number, it
might not be covered by warranty.
the product for repair, etc. Our company will assume responsibility for the return
shipping to the customer.
disassembly.
have resulted from the use of this product) is outside the scope of this warranty.
express or implied warranties that include legal defect liability.
Appendix
5-5
English
G
StarBoard
BT-2
English
StarBoard BT-2G User's Guide
82-910W90023V1.0
BT2G-061101
BT2G-061101
Loading...