Page 1
0
Unboxing and Tutorial of General Analog System
Page 2
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
1 of 12
Preparation
1. DVR, Analog camera
2. Waterproof tape, HDD, VGA cable, Coaxial cables, Monitor,
Unboxing and Tutorial of General Analog System
1． Topology
When building an analog surveillance system via coaxial cable connection, you will need DVR and
analog cameras. The following is the topology diagram.
2． Unboxing
Take out the DVR, accessories and cameras from the box, prepare the waterproof tape, HDD,
coaxial cables, VGA cable and monitor.
1
Page 3
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
2 of 12
3． Installation camera
a) Unpacking analog camera
b) Paste the Drill Template to the wall or ceil and follow the prompt to drill screw hole.
2
Page 4
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
3 of 12
c) Drive in the expansion screw to the screw hole.
d) Fix the camera to the wall or ceil with screw.
3
Page 5
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
4 of 12
e) Adjust the device lens angel.
f) Install the waterproof jacket coaxial cable.
4
Page 6
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
5 of 12
g) Wrap waterproof tape around the power cable
5
Page 7
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
6 of 12
Note: Waterproof protection is a must!
h) Remove protective film
4． Install HDD into DVR
a) Loosen screws and remove cover of DVR
6
Page 8
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
7 of 12
b) Connect SATA cable and data cable to DVR
c) Fix HDD to DVR bottom
7
Page 9
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
8 of 12
d) Install the cover back
Note: The HDD model should in the HDD Compatible List
(https://www.hikvision.com/content/dam/hikvision/en/support/notice/hdd-compatible-list-forhikvisiondvrDVR/HDD%20Compatible%20List%20for%20Hikvision%20DVR%20DVR) !
5． Connection
a) Connect the analog cameras to the BNC interfaces of the DVR with the coaxial cables.
8
Page 10
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
9 of 12
Turbo 3.0&Turbo 4.0
SYV-75-3
RG59(75-4)
RG6(75-5)
CAT 5e
720P
900
1000
1200
500
1080P
600
700
800
400
3MP
600
700
800
400
5MP
200@20fps
400@12fps
250@20fps
500@12fps
300@20fps
800@12fps
100@20fps
200@12fps
8MP
200
250
300
100
Turbo 1.0
SYV-75-3
RG59(75-4)
RG6(75-5)
CAT 5e
720P
300
400
500
200
1080P
300
400
500
200
b) Connect the DVR to a monitor with the VGA cable.
c) Connect the power adaptor and the mouse.
Note: Please note the limitation of transmission distance!
9
Page 11
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
10 of 12
6． Configuration
a) Power up the DVR and the monitor. After choose the language，you need to set the admin password and
the IP camera activation password.
b) Set the reserved E-mail，security question configuration and unlock pattern.
10
Page 12
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
11 of 12
c) Set time and check the checkbox of Initialize HDD, click Next, then exit the Wizard
d) Live view of the POC cameras will start to show on the monitor after about 30 seconds and all
cameras will be recorded to the HDD. The in the live view image means this channel is
recording video.
Note: The default Record Schedule type is Continuous and Record Schedule time is 7*24.
11
Page 13
Title:
Unboxing and Tutorial of General Analog System
Version:
v1.0
Date:
18/04/2019
Product:
DVR, Camera
Page:
12 of 12
No.
Details
Yes/No?
1
Are the coaxial cable and power cord waterproof?
2
Are all cameras online?
3
Can the web browser be accessed successfully？
4
Is the status of HDD normal?
5
Are playback of all camera videos normal?
7． Check List
8． FAQ
a) What can I do when DVR live view interface shows NO VIDEO after connecting analog camera?
Check whether analog channel the open state is on;
Confirm whether the coaxial cable connected to BNC port is loose;
b) What can I do when play back interface shows no video file?
Check the status of HDD on HDD interface, if it shows uninitialized, initialize the HDD;
Check the record schedule on Record—Schedule interface, if the record schedule is empty, set the record
schedule.
12
Page 14
0
Loading...