Hikvision DS-KABD8003-RS3 User Manual

DS-KABD8003-RS3
Protective Shield

Key Feature

 Adapts to three-module surface mounting with protective

shield.

Specification

Parameters

Material

SECC

Working
temperature

-40° C to +60° C(-40° F to 140° F)

Working
humidity

10% to 95%

Dimension

325.8 × 116.4 × 58 mm (12.83" × 4.58" ×

2.28")

Weight

702.3 g

Available Model

DS-KABD8003-RS3

Dimension

Installation

1. Paste the installation Sticker 1 onto the wall. Make sure the sticker is

placed leveled via measuring with the gradienter.
Drill 4 holes align to the screw holes on the sticker.

The suggested size of hole is 6 (diameter) × 25 (depth) mm.

2. Remove the sticker and insert the expansion sleeves into the screw

holes.
Fix the mounting frame and protective shield onto the wall with 4

expansion bolts.
Thread the module-connecting lines across the thread holes of the

frame.
Pass the main unit connecting lines across the thread hole to the top

grid.
Connect the cables and module-connecting line 1 to the

corresponding interfaces of the main unit, then place the main unit
into the upper grid.

Connect the other end of the module-connecting line1 to the input
interface of the sub module. Connect two sub modules via module­connecting line 2.

Organize the line with cable tie in the package.

3. Insert the modules in to the frame after wiring. Main unit must be

placed in the top grid.

4. Use the hexagon wrench in the package fix the cover onto the frame.