HikVision DS-K3G411 Datasheet
DS-K3G411
Tripod Turnstile
The DS-K3G411 series tripod turnstile is designed to detect
unauthorized entrance or exit. By adopting the turnstile
integratedly with the access control system, person should
authenticate to pass through the lane via presenting IC or ID
card, scanning QR code, etc. It is widely used in attractions,
stadiums, construction sites, residences, etc.
TCP/IP network communication: The communication data
is specially encrypted to relieve the concern of privacy leak
Free accessing, forbidden mode are selectable
Bidirectional (Entering/Exiting) lane
Remote control and management
LED indicates the entrance/exit and passing status.
Fire alarm passing: When the fire alarm is triggered, the
barrier will be dropped automatically for emergency
evacuation.
Valid passing duration settings: System will cancel the
passing permission if a person does not pass through the
lane within the valid passing duration
Specification
System
MCBF
＞
3 million times
Interface
RS-232
6 interfaces can be switched to RS-232 via DIP switch;
2 for fingerprint module or QR code scanner
RS-485
6 (The interfaces can be switched to RS-232 via DIP switch)
Lock output
2
IO input
2
IO output
2
Network interface
1
Capacity
Card capacity
60,000
Event capacity
180,000
General
Throughput
More than 35 persons per minute
The actual throughput is affected by the person passing rate and passing method.
Power supply method
100 to 240 VAC; 50 to 60 Hz
Lane width
550mm
Working temperature
-10 °C to 50 °C (14 °F to 122 °F)
Working humidity
0% to 95% (No condensing)
Pedestal material
SUS304 stainless steel
Dimensions
Without package: 502 mm × 202 mm × 1010 mm (19.8" × 8.0" × 40.0")
With package: 745 mm × 365 mm × 1120 mm (29.3" × 14.4" × 44.1")
Application environment
Indoor
Weight
Without package: 26 kg (57.3 lb)
With package: 31 kg (68.41 lb)
Approval
CE/FCC/CB/RoHS/REACH/WEEE
Maintenance
The main element of the turnstile is stainless steel, which is rustless (antioxidant) and corrosion resistant (The anti corrosion
ability in the medium of acid, alkali, and salt). In order to keep the stainless steel from being oxidized or corroded, you
should clean and care the turnstile surface periodically .
The instructions and tips for maintaining the turnstile are as follows:
Select different stainless steel types according to the variety of the environments. You can select 304 stainless steel for
common circumstances and 316 stainless steel for the scenarios of seasides and chemical plants.
Keep the device surface clean and dry.
Use non-woven cloth and ethyl alcohol to clean the dirt on the device surface.
Use sourcing pad (do not use mesh cleaning ball) to clean the rust on the device surface by following the wire drawing on
the stainless steel. And then use non-woven cloth and stainless steel cleaner to wipe the device surface.
Clean and maintain the device by using non-woven cloth and stainless steel cleaner periodically. It is suggest to clean the
device every month in common circumstances and every week for severe environments (seaside and chemical plants for
instance).
Loading...