HIKVISION DS-8100HQHI-HK, DS-7200HWI-HK, DS-7300HWI-HK, DS-7300HQHI-HK, DS-7200HQHI-HK Quick Manual

Active IP Device by Creating Strong Password

V20150706

1

This Quick Guide is going to introduce

how to Active IP Device by Creating Strong Password

Before you can log into the device properly, you must create a password for the administrator user
“admin” of the device to activate it. Activation via Local GUI, Activation via Web Browser, Activation via
SADP, and Activation via Client Software are all supported. Follow the steps below to activate the device.

** This function should be supported by the devices.

- IP Cameras FW,
 DS-2CD2xx2-I: V5.3.0 Build150513 or Above

- DVR FW,
 DS-7200HWI-HK, DS-7300HWI-HK: V3.1.4 Build150430 or Above

- Turbo HD DVR FW,
 DS-7200HQHI-HK, DS-7300HQHI-HK, DS-8100HQHI-HK: V3.1.7 Build150515 or Above

- NVR FW,

 DS-7600NI-PHK: V3.0.15 Build150528 or Above

 DS-7700NI-PHK, DS-8000HFI-HK, DS-9000HWI-ST, DS-9600NI-ST: V3.3.1 Build150423 or Above

Activation via Local GUI (Only Supported by Back-End Devices: DVR/NVR)

Steps:

1. Power on the DVR/NVR.

2. Create a password and input the password into the password field.

STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.

Active IP Device by Creating Strong Password

V20150706

2

Activation via Web Browser

Steps:

1. Power on the IP Device, and connect it to the network.

2. Input the IP address into the address bar of the web browser, and click “Enter” to get the activation
interface.

Notes:

 The default IP address of the camera is 192.168.1.64.
 For the camera enables the DHCP by default, you need to activate the camera via SADP software.

Please refer to the following chapter for Activation via SADP.

3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.

4. Confirm the password.

5. Click OK to save the password and enter the live view interface.

 