User’s Manual
ERGOF-2G4
1. DESCRIPTION
The ERGOF-2G4 is a 2.4GHz MFS Transmitter that has eight panel switches that can be configured with
1~3 step switches. It has four digital inputs dedicated to the left and right single step side switches, two
digital inputs for toggle switch with 3 states, and one digital input for E-Stop switch. All switches (except EStop) have configurable DK assignments; a maximum of 3 DKs can be assigned for each switch. The Start
SW has a fixed DK1 assignment in addition to the 3 DKs that can be assigned to it. The E-stop switch is
fixed to DK31.
Note: Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
2. TECHNICAL SPECIFICATIONS
Temperature Range -20o to +70o Celsius
Supply Voltage Range 3.3 to 5.0Vdc
Current Consumption <30mA at 3.6Vdc
Inputs Eight 3-step switches
Four 1-step side-switches
R-O-R Toggle Switch
Stop switch
Output LED Indicators (Red / Green)
RF Telegram
Note: The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
Loading...