Hanna Instruments HI 8734, HI 8633 Instruction Manual
Instruction Manual
HI 8633
HI 8733 - HI 8734
Reliable and Waterproof
Multi-Range
Conductivity Meters
www.hannainst.com
32
HI 8633 and HI 8733 have been designed specifically for use in the areas
of production and quality control. It is often necessary to test samples with
different concentrations ranging from deionized water to brine.
Both models can be manually calibrated at 1 point.
The HI 8733, with a built-in temperature sensor and Automatic
Temperature Compensation, is the perfect instrument for measuring
samples with fluctuating temperature.
HI 8734 has been specially designed for the water conditioning industry,
particularly in the softening, demineralization, reverse osmosis and
drinking water applications.
Three ranges of measurement assure the highest accuracy possible. In
addition, Manual Temperature Compensation is possible through a knob
on the front panel.
The ratio between conductivity and TDS is factory set at 0.5.
Moreover, the 4-ring potentiometric probes supplied with the meters are
made of rugged PVC - ideal for indoor, as well as outdoor measurements.
Remove the instrument from the packing material and examine it
carefully to make sure that no damage has occurred during shipping.
If there is any noticeable damage, notify your Dealer or the nearest
Hanna office immediately.
Each meter is supplied with:
• Conductivity probe with DIN connector and 1 m (3.3') cable:
• HI 76301D for HI 8633 and HI 8734
• HI 76302W for HI 8733
• Calibration solution sachet
• Screwdriver, 1 x 9V battery and instruction manual
Note: Save all packing materials until you are sure that the
instrument functions correctly. Any damaged or defective item
must be returned in its original packing materials together
with the supplied accessories.
PRELIMINARY EXAMINATION
GENERAL DESCRIPTION
PRELIMINARY EXAMINATION ...................................................... 3
GENERAL DESCRIPTION .............................................................. 3
FUNCTIONAL DESCRIPTION & SPECIFICATIONS OF HI 8633........ 4
FUNCTIONAL DESCRIPTION & SPECIFICATIONS OF HI 8733........ 5
FUNCTIONAL DESCRIPTION & SPECIFICATIONS OF HI 8734........ 6
OPERATIONAL GUIDE ................................................................. 7
CALIBRATION............................................................................. 8
CONDUCTIVITY VERSUS TEMPERATURE CHART ........................... 12
TDS VERSUS TEMPERATURE CHART ........................................... 13
DETERMINING THE TEMPERATURE COEFFICIENT OF A SOLUTION
(HI 8733) ............................................................................... 14
PROBE MAINTENANCE .............................................................. 15
BATTERY REPLACEMENT ............................................................ 16
ACCESSORIES ........................................................................... 17
WARRANTY .............................................................................. 18
CE DECLARATION OF CONFORMITY............................................ 19
Dear Customer,
Thank you for choosing a Hanna Product. Please read this instruction
manual carefully before using the instrument. It will provide you with
the necessary information for a correct use of the instrument, as well
as a more precise idea of its versatility.
If you need additional technical information, do not hesitate to e-mail
us at tech@hannainst.com.
These instruments are in compliance with the directives.
TABLE OF CONTENTS
54
1) Liquid Crystal Display
2) Measurement range selection keys
3) Automatic Temperature Compensation coefficient knob
4) ON/OFF key
FUNCTIONAL DESCRIPTION &
SPECIFICATIONS OF HI 8733
1) Liquid Crystal Display
2) Conductivity/temperature selection key
3) Measurement range selection keys
4) Manual temperature compensation knob
5) ON/OFF key
FUNCTIONAL DESCRIPTION &
SPECIFICATIONS OF HI 8633
Range 0.0 to 199.9 / 0 to 1999 µS/cm
0.00 to 19.99 / 0.0 to 199.9 mS/cm
Resolution 0.1 / 1 µS/cm
0.01 / 0.1 mS/cm
Accuracy ±1% Full Scale
(@ 20°C/68°F) excluding probe error
Typical EMC ±2% Full Scale
Deviation
Calibration Manual, 1 point, through trimmer
Temperature Manual, 0 to 50°C (32 to 122°F)
Compensation with β = 2%/°C
Probe (included) HI 76301D with 1m (3.3') cable
Environment 0 to 50°C (32 to 122°F);
RH max 100%
Battery Type 1 x 9V, alkaline (IEC 6LR61)
Life Approx. 100 hours of continuous use
Dimensions 164 x 76 x 45 mm (6.5 x 3.0 x1.8")
Weight 250 g (8.8 oz.)
Range 0.0 to 199.9 / 0 to 1999 µS/cm
0.00 to 19.99 / 0.0 to 199.9 mS/cm
Resolution 0.1 / 1 µS/cm
0.01 / 0.1 mS/cm
Accuracy ±1% Full Scale
(@ 20°C / 68°F) excluding probe error
Typical EMC ±2 % Full Scale
Deviation
Calibration Manual, 1 point, through trimmer
Temperature Automatic, 0 to 50°C (32 to 122°F) with
Compensation β adjustable from 0 to 2.5% per °C
Probe (included) HI 76302W ATC with 1m (3.3') cable
Environment 0 to 50°C (32 to 122°F);
RH max 100%
Battery Type 1 x 9V, alkaline (IEC 6LR61)
Life Approx. 100 hours of continuous use
Dimensions 164 x 76 x 45 mm (6.5 x 3.0 x1.8")
Weight 250 g (8.8 oz.)
76
• Each meter is supplied complete with a 9V battery. Remove the
battery compartment cover on the back of the meter (see
page 16). Install the battery while paying attention to its
polarity.
• Connect the probe to the meter securely
by aligning the pins with the socket
and pushing the plug in.
• Make sure that the meter has been calibrated before taking any
measurements (see "Calibration" section).
• Immerse the conductivity probe into the
sample, with the holes on the shaft
completely submerged.
If possible, use plastic beakers or containers to minimize any EMC interference.
• Tap the probe lightly on the bottom of the beaker to remove any
air bubbles which may be trapped inside the PVC sleeve.
• Turn the instrument on by pressing the ON/OFF key.
• For HI 8633 and HI 8734:
Take the temperature of the solution
with a ChecktempC or another accurate
thermometer.
Press the COND/TEMP key for HI 8633 or TDS/TEMP for HI 8734
to display the temperature and adjust the temperature knob to
that of the solution e.g. 20°C.
• For HI 8733:
Adjust the TEMPERATURE COEFFICIENT
knob to 2% to compensate for the
temperature effect of average solutions
(to determine exact value for a particular solution, see page 14).
OPERATIONAL GUIDE
°C
COND.
TEMP.
TDS
TEMP.
ºC
2.5
2
1.51
0.5
0
TEMPERATURE COEFFICIENT
1) Liquid Crystal Display
2) Measurement range selection keys
3) Manual temperature compensation knob
4) TDS/temperature selection key
5) ON/OFF key
FUNCTIONAL DESCRIPTION &
SPECIFICATIONS OF HI 8734
Range 0.0 to 199.9 / 0 to 1999 mg/L
0.00 to 19.99 g/L
Resolution 0.1 / 1 mg/L
0.01 g/L
Accuracy ±1% Full Scale
(@ 20°C / 68°F) excluding probe error
Typical EMC ±2 % Full Scale
Deviation
Calibration Manual, 1 point, through trimmer
Temperature Manual, 0 to 50°C (32 to 122°F)
Compensation with β = 2%/°C
TDS factor 0.5
Probe (included) HI 76301D with 1m (3.3') cable
Environment 0 to 50°C (32 to 122°F); RH max 100%
Battery Type 1 x 9V, alkaline (IEC 6LR61)
Life Approx. 100 hours of continuous use
Dimensions 164 x 76 x 45 mm (6.5 x 3.0 x1.8")
Weight 250 g (8.8 oz.)
Loading...