Hafler IRIS COMPACT DISC PLAYER User Manual

OWNER’S
IRIS COMPACT DISC PLAYER
MANUAL
IRIS COMPACT DISC
PLAYER
A Division of Rockford Corporation
613 South Rockford Drive
Tempe, Arizona 85281
967 - 3565
602
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Installation
Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Operation
Explanation Of Keys Remote Control Display Indications Loading/Unloading Disc PlayingaDisc Next/Previous Track Selections Searching Function Random Play Programming
Additional Information Technical Data
Symptoms and Their Likely Causes . . . . . . . . . . . . . . Page 17
Factory Service and Limited Warranty . . . . . . . . . . . . .
..........................
..........................
..........................
......................
........................
.......................
....................
........................
................
.......................
.....................
Page 2 Page 4 Page 5 Page 7
Page7
Page 8 Page 9 Page 9 Page 11
Page 13 Page 16
Page 17
INTRODUCTION
The Hafler of audio technology. The IRIS CD completes an intensive engineering effort to create a series of components which offer superior performance combined with the unprece­dented convenience of the IRIS remote control.
The basic operation and features of the IRIS CD Player are described in simplified form in figures 1 and 2. Although operation of the CD Player is possible by studying these diagrams only, complete appreciation of its features and operating modes can only be realized by thoroughly read­ing this owner’s manual.
We have tried to present this information in an easy to follow format. We urge you to take the time to read through this manual as soon as possible.
INSTALLATION
SET-UP OF THE IRIS CD PLAYER
FREE STANDING
Always set the player horizontally on a flat, firm surface. Allow a minimum space of a least
as not to interfere with the cooling of the player.
IRIS
system is a major step forward in the world
14"
above the player so
STACKED
Locate the player preferably at the bottom. Never set the player directly on top of a high-power amplifier, because such an amplifier gives off a substantial amount of heat.
RACK MOUNTING
The IRIS CD Player is shipped with removable end caps on its front panel. Optional rack mounting ears are avail­able from the factory for mounting the unit in a standard
19” equipment rack.
1
WARNING- Never allow the player to stand for long
periods in direct sunlight or near any heat source.
CONNECTIONS
REMOTE CONTROL
The IRIS CD has two recessed male connectors on the
back panel. They are internally connected together to allow the IRIS digital data-bus to “daisy-chain” to other IRIS-compatible accessories.
Connect either end of the supplied ribbon-type umbilical cable to either of the CD’s connectors. Note that both of the cable’s connectors are keyed, and therefore fit only one way. Be sure to insert the plugs fully. Connect the free end of the cable to the connector on the rear of (either) the
IRIS Preamp or IRIS Tuner.
AUDIO
Output Right/Left: For the signal output to the preamplifier. Connect a standard RCA-type patch cord from the right and left outputs into the corresponding CD input jacks of your IRIS preamplifier.
Digital: For digital output signal to an outboard Digital to
Analog (A/D) converter.
POWER
For AC line (mains) power. Make sure the line voltage on
the rear of the unit is appropriate for your location.
OPERATION
EXPLANATION OF KEYS (Refer to Figure 1)
1. POWER button
For switching on and off.
2. DISPLAY Indicates the player’s present function. Displays details from the disc contents list.
The indications on the display are detailed in Figure
2.
3. PLAY button
For starting play (PLAY). For returning to the beginning of a track (REPLAY).
4. STOP button For stopping play. For erasing a program.
5. OPEN/CLOSE button
For opening and closing the disc tray.
6. SHF (SHUFFLE) button
For playing all tracks on a disc in random order.
7. PRG (PROGRAM) button
For storing track numbers in a program. For erasing track numbers from a program. For checking the program.
8. REPEAT button
For repeating a disc or a program.
9. W, >> (SEARCH) button
For fast search to a particular passage during play.
(G
for reverse, >> for forward.)
1O.PAUSE button (HOLD on remote)
For briefly interrupting play and for returning from in-
terrupted play.
11.(
(PREVIOUS), )1 (NEXT) buttons
For selecting a previous or later track during play. For selecting the track number you want play to begin with. For selecting track numbers when compiling a pro­gram.
IRIS REMOTE CONTROL
I
TRANSMITTER
You should re-read the remote section of the IRIS
PREAMPLIFIER manual in conjunction with the following
additional information.
HANDSHAKE SYSTEM
The umbilical connection established allows a very con­venient “HANDSHAKE” operation between IRIS SYSTEM COMPONENTS. In simple terms, your IRIS CD Player tells your IRIS Preamplifier that it is connected and powered. This tells the Preamplifier, when CD is selected, to automatically “transfer” the remote’s top eight (multi­legend) keys to perform CD command functions.
All of the KEY functions of the CD Player panel which are convenient from remote operation are available from the 8 remote KEYS:
PREAMP
PHONO CD TUNER VIDEO AUX
1
AUX
2
TAPE
1
TAPE
2
TUNER
MEM 1 MEM 2 MEM 3 MEM
4
MEM 5
DOWN SCAN STOP SCAN UP
CD
PLAY STOP <<
>> (FORWARD SEARCH)
RPT
I4
HOLD (PAUSE)
bl
(REVERSE SEARCH)
(REPEAT) (PREVIOUS)
(NEXT TRACK)
Loading...
+ 12 hidden pages