Grundig LXW 82-8620, LXW 70-8620 User Manual

ǵ
COLOR TELEVISION
LENARO 27 LXW 70-8620 DOLBY
LENARO 32 LXW 82-8620 DOLBY
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS POLSKI
2
CONTENTS
____________________________________________
3-4 Set-up and safety 5 Connection/Preparation
5 Connecting the antenna and the mains cable 5 Inserting batteries in the remote control
6-9 Overview
6 Connections on the television 7 Controls on the television 8-9 The remote control
10-13 Settings
10 Setting television channels automatically 10-11 Changing stored channels 11 Picture settings 12-13 Audio settings
14-18 Television operation
14-15 Basic functions 15 Zap function 16 Zoom function 17 Changing the picture format 18 PIP mode
19-20 Teletext mode
19 TOP text or FLOF text mode 19 Normal text mode 19-20 Additional functions
21 Convenience functions
21 Convenience functions with the »Features« menu
22-27 Using external devices
22-25 DVD player, DVD recorder, video recorder or set-top box 25 Headphones 26 Decoder or satellite receiver 27 Camcorder 27 Hi-fi system/AV receiver
28 PC Monitor Mode
28 Connecting a PC 28 Selecting the channel position for the PC 28 Settings for the PC
29-31 Special settings
29-31 Setting television channels
32-34 Information
32 Technical data, 32 Service information for dealers 32 Environmental note 33 Troubleshooting 34 Additional Information for units sold in the UK.
ENGLISH
3
SET-UP AND SAFETY
___________________________
Please note the following information when setting up your television set. This television set is designed to receive and display video and audio
signals. Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal. External light falling on the screen impairs picture quality.
To assure sufficient ventilation make sure there is enough space around it in the wall unit.
The television set is designed for use in dry rooms. If you do use it in the open, please ensure that it is protected from moisture, such as rain or splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may spill liquid, thus presenting a safety risk. Place the television set on a solid, level surface. Do not place any objects such as newspapers on the television set or cloth or similar items beneath it.
Do not place the television set close to heating units or in direct sunlight, as this will impair cooling. Heat build-up can be dangerous and shortens the operating life of the television set. For reasons of safety, have a specialist remove any dirt deposits in the set from time to time.
Do not open the television set under any circumstances. Warranty claims are excluded for damage resulting from improper handling.
Make sure the power cord or the power supply unit (if provided) are not damaged. The television set may only be operated with the mains cable/adapter supplied.
Thunderstorms are a danger to all electrical devices. Even if the tele­vision set is switched off, it can be damaged by a lightning strike to the mains or the antenna cable. Always disconnect the mains and antenna plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
Note:
Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it. Only plug the device into the mains socket after you have connected the external devices and the antenna.
! SERVICE !! SERVICE !
10
cm
20
cm
! SERVICE !
TV R
20 cm
AV 2
AV 1
AUDIO
PC-DVI
LR
YPbPr
LRV
PC-INDVI-D
ANT IN
HDMI
AUDIO-IN
AV OUT
COMPONENT VIDEO INPUT
AV 2
AV 1
AUDIO LR
YPbPr
LRV
ANT IN
HDMI
AV OUT
COMPONENT VIDEO INPUT
10
cm
Lenaro
Lenaro
lf
o
G
m
a
g
rie
K
Lenaro
AC IN
PC-DVI
PC-INDVI-D
AUDIO-IN
AC IN
4
Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. These may cause corrosion to the feet of the device, thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove.
The screen of your LCD television meets the highest quality standards and has been checked for pixel faults. Despite the great care taken in manufacturing, technological reasons make it impossible to completely discount the possibility that some pixels may be faulty. Provided they are within the thresholds specified by the DIN norm, pixel faults of this kind cannot be regarded as a defect as defined by the warranty.
SET-UP AND SAFETY___________________________
ENGLISH
5
CONNECTION/PREPARATION
__________
Connecting the antenna and the mains cable
1 Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-
na socket on the television.
2 Plug the mains cable supplied into the »AC IN« mains socket of the tele-
vision.
3 Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have connected the external devices and the antenna.
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid. 2 Insert the batteries (Mignon type, for example UM-3 or
AA, 2x1,5V). Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage re­sulting from used batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.
1
2
3
T
AV OUT
AV 2
AV 1
TV R
AUDIO
ANT IN
LR
COMPONEN
LRV
AUDIO
LR
YPbPr
LRV
ANT IN
AV OUT
COMPONENT VIDEO INPUT
PC-DVI
PC-INDVI-D
HDMI
AUDIO-IN
AC IN
AC IN
6
OVERVIEW
____________________________________________
Connections on the television
AV 2 Euro/AV socket (FBAS signal). AV 1 Euro/AV socket (FBAS signal,
RGB signal).
AV OUT V L R Audio and video output. ANT-IN Antenna socket. COMPONENT VIDEO INPUT
AUDIO LR Audio signal input (YUV signal). Y Pb Pr Video signal input (YUV signal).
DVI-D DVI-D socket, video signal input for
PC (DVI).
HDMI HDMI socket, audio/video signal
input (HDMI).
PC-IN VGA socket, video signal input
for PC.
PC-DVI AUDIO IN Audio signal input for PC. AC IN Socket for the mains cable.
AV 2
HDMI
AC IN
AV OUT V L R
DVI-D
AV 1
COMPONENT VIDEO INPUT AUDIO LR Y Pb Pr
ANT IN
PC-DVI AUDIO IN
AV 2
AV 1
AUDIO
LR
YPbPr
LRV
ANT IN
AV OUT
COMPONENT VIDEO INPUT
PC-DVI
PC-INDVI-D
HDMI
AUDIO-IN
AC IN
ENGLISH
7
Controls on the television
Ȃ Power switch, switches the device to and from standby
mode.
–P + Switch the television on from standby.
Channel selection. Select a function in the menu.
TV/AV Opens the pre-selection for AV channels.
Select within the menu with »P +« or »– P«, confirm with »–
z«.
MENU Opens the »MAIN MENU« menu.
Press »–P +« to select an item. Press »TV/AV« to activate a function. Press »–
z +« to set a function.
Press »MENU« to close the menu.
z + Adjust the volume.
Select menu functions.
Video (AV 3) Video signal input for camcorder. L AUDIO R Audio signal input for camcorder. S-VHS Video signal input for S-Video camcorder.
y Headphone connection (3.5 mm jack).
OVERVIEW
____________________________________________
L
enaro
enaro
L
S-VHS
R
P
TV/AV
MENU
L
Video
L enaro
8
OVERVIEW
____________________________________________
The remote control
Ǽ Switches off the television set (stand-by).
1...0 Switches the television on from standby mode
Selects channels directly.
? Displays the number and name of a station.
Switches to double character size in teletext mode.
E
Switches between picture formats. Page stop in teletext mode.
PIP Shows an inset picture;
activates the double window function (two different TV programmes on separate halves of the screen); switches back to normal size.
AV Opens the pre-selection for AV channels.
Then selection with P+ or P-.
d Sound on/off (mute).
i Calls up the »Main menu«.
Z Zap function.
P+, P- Switches the television on from standby;
selects stations step by step; moves the cursor in the menus up and down.
ǸǷ Adjusts the volume;
moves the cursor left/right.
OK Calls up the preset channels;
activates various functions.
TXT Switches between teletext and TV modes
TV-G Key has no function.
z
Selects various picture settings; scrolls back a page in teletext mode.
Ȅ Displays the time;
selects the next page in teletext mode.
ǷǷ
Freeze-frame; selects the desired chapter in teletext mode.
F
Selects various audio settings; selects the desired topic in teletext mode.
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
ENGLISH
9
OVERVIEW
____________________________________________
SCAN Reveals answers in teletext mode.
PAT Selects the Double Window function.
S Selects the sub-pages in teletext mode.
P Updates a page in teletext mode.
DR, DVD Switches to operation of a GRUNDIG digital receiver,
GRUNDIG digital receiver with hard disk (PDR), GRUNDIG DVD player or GRUNDIG DVD recorder.
Keep the appropriate button (»DR«, »DVD«) pressed down. Then press the appropriate button.
Note:
The »DR« button has been programmed for operating a GRUNDIG digital receiver (remote control level 1). The »DVD« button has been programmed for operating a GRUNDIG DVD player. You can change this programming, see »AUX« button. The functions available depend on the model of the device you are using. Just try it out.
AUX Programming the remote control for the operation of
external devices. Press »AUX« and hold it down and press three numerical buttons to enter the appropriate code: »1«, »2«, »3« for a GRUNDIG DVD player. »4«, »5«, »6« for a GRUNDIG DVD recorder. »1«, »4«, »7« for a GRUNDIG digital receiver (remote control level 1). »2«, »5«, »8« for a GRUNDIG digital receiver (remote control level 2). »3«, »6«, »9« for a GRUNDIG digital receiver with hard disk (PDR).
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
10
Setting television channels automatically
The television set is equipped with an automatic channel search system. You start the search and can then sort the television channels into your order of preference. 99 preset positions are provided, to which you can assign television channels from the antenna or from the cable connection.
1 Switch on the television with »
Ȃ« on the television set, then
press »P+« on the remote control. – The »Sprache« (Menu language) menu appears when the
television is first switched on.
Hint:
If the »Sprache« (Menu language) menu does not appear on the screen, then set it in accordance with the chapter on reset­ting all television channels on page 31.
2 Select language with »P+«, »P-«, »
Ǹ
« or »Ƿ« and press
»OK« to confirm. – The »Country« menu appears.
3 Press »P+«, »P-«, »
Ǹ
« or »Ƿ« to select the country and
»OK« to confirm. – The search begins. It may last a few minutes, depending on
the number of television stations found.
– After the search the television switches to channel position 1
and the »Program table« menu appears.
Changing stored channels
You can delete channels that have been stored more than once during the automatic search. You can also store channels in a diffe­rent preset position, change or enter the name of a channel as well as skip channels.
Deleting channels
1 In the »Program table« menu, select the station to be deleted
with »P+«, »P-«, »Ǹ« or »Ƿ«.
2 Highlight the channel with »
ǷǷ
« (yellow).
3 Press »
ǷǷ
« (yellow) to delete the channel.
Note:
To delete other stations, repeat steps 1 and 3.
SETTINGS
______________________________________________
Program Table
Skip
Select
Move Delete
Exit Name
01 ARD 02 ZDF 03 BR 04 RTL 05 SAT 1 06 PRO 7 07 BR 08 TEL5
09 10
11 S
12 ---- S 13 ---- S 14 ---- S 15 ---- S 16 ---- S
17 ---- S 18 ---- S 19 ---- S 20 ---- S 21 ---- S 22 ---- S 23 ---- S 24 ---- S
Sprache
Deutsch Português Türkçe
Dansk Svenska Eλληvικά Español Suomi Hrvatski Français âesky Pyccк English Sloven‰cina Româna Italiano Slovensko Cск Norsk Magyar Блгapск
Dutch Polski
Auswählen und bestätigen Ende
OK
Country
Germany Greece Romania Austria Hungary Slovakia Belgium Iceland Slovenia Bulgaria Ireland Spain Croatia Italy Sweden Czech Luxembourg Switzerland Denmark Netherlands Turkey
United Kingtom Norway Yugoslavia
Finland Poland France Portugal
Select Back and confirm Exit
OK
ENGLISH
11
Sorting television channels
1 In the »Program table« menu, select the channel to be moved
with with »P+«, »P-«, »Ǹ« or »Ƿ«.
2 Highlight the channel with »
Ȅ« (green).
3 Select a new channel position by pressing »P+«, »P-«, »
Ǹ
« or
»
Ƿ
« and then press »Ȅ« to confirm.
– All of the channels that follow move up one position.
Note:
To sort the other television channels repeat steps 1 to 3.
Entering the channel names (maximum of 5 characters)
1 In the »Program table« menu, select the desired channel with
»P+«, »P-«, »Ǹ« or »Ƿ«.
2 Highlight the channel with »
F
« (blue).
3 Select letters or numbers with »P+« or »P-«, move to the next
position with »
Ǹ
« or »Ƿ« and repeat.
4 Store the channel name with »OK«.
Note:
To enter additional channel names, repeat steps 1 to 4.
Skipping television channels
You can mark television channels which should be skipped during selection with »P+« or »P-«. A selection with the number keys is also possible.
1 In the »Program table« menu, select the desired channel with
»P+«, »P-«, »
Ǹ
« or »Ƿ«.
2 Highlight the channel with »
z
« (red). – An »S« appears behind the name of the television station. – You can deselect the selected channel by pressing the red
button again.
Concluding the settings
1 Press »i« to finish the settings.
SETTINGS
______________________________________________
Program Table
Skip
Select
Move Delete
Exit Name
01 ARD 02 ZDF
03 BR
04 RTL 05 SAT 1 06 PRO 7 07 BR 08 TEL5
09 10 11 S 12 ---- S 13 ---- S 14 ---- S 15 ---- S 16 ---- S
17 ---- S 18 ---- S 19 ---- S 20 ---- S 21 ---- S 22 ---- S 23 ---- S 24 ---- S
Program Table
Skip
Select
Move Delete
Exit Name
01 ARD 02 ZDF 03 BR 04 RTL 05 SAT 1 06 PRO 7 07 BR 08 TEL5
09
10 11 S 12 ---- S 13 ---- S 14 ---- S 15 ---- S 16 ---- S
17 ---- S 18 ---- S 19 ---- S 20 ---- S 21 ---- S 22 ---- S 23 ---- S 24 ---- S
Program Table
Skip
Select
Move Delete
Exit Name
01 ARD S
02 ZDF 03 BR 04 RTL 05 SAT 1 06 PRO 7 07 BR 08 TEL5
09 10 11 S 12 ---- S 13 ---- S 14 ---- S 15 ---- S 16 ---- S
17 ---- S 18 ---- S 19 ---- S 20 ---- S 21 ---- S 22 ---- S 23 ---- S 24 ---- S
12
Picture settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
3 Select »Default settings« with »P+« or »P-« and the setting
»User« with »
Ǹ
« or »Ƿ«.
4 Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Noise reduction« with »P+« or »P-« and press »OK« to con­firm.
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for playback of American television programmes on the video recorder).
5 Press »
Ǹ
« or »Ƿ« to select the level, and then press »OK« to
confirm.
6 Press »
i« to finish the settings.
Audio settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Volume
1 Select »Volume« with »P+« or »P-« and adjust the setting with
»Ǹ« or »Ƿ«.
Balance
1 Select »Balance« with »P+« or »P-« and adjust the setting with
»Ǹ« or »Ƿ«.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual B «) and the dubbed version on sound channel A (display: »Dual A«), you can select the sound channel you desire. If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«). You can switch the sound to »Mono« if the stereo reception quality is poor.
1 Select »Sound type« with »P+« or »P-« and adjust the setting
with »
Ǹ
« or »Ƿ«.
SETTINGS
______________________________________________
Picture
Select Back and edit Exit
OK
Brightness 39
Contrast Colour Sharpness
Hue
Noise reduction Sharp
UserPicture smart
Sound
Select Back and edit Exit
Volume 0
Balance Sound type Effect AVL Equalizer
On
Normal
Stereo
Headphones
To Page 2
ENGLISH
13
Dolby Virtual *
Dolby Virtual is an innovative electronic solution, which is integra­ted in the television set and only requires the built-in speakers to produce Dolby Surround effects.
1 Select »Sound mode« with »P+« or »P-«. 2 Select »Dolby Virtual« with »
Ǹ
« or »Ƿ«.
Stereo width
Widens the audio output for stereo programmes and improves the sound with mono reception.
1 Select »Sound type« with »P+« or »P-«. 2 Press »
Ǹ
« or »Ƿ« to select the setting.
Automatic volume
The television channels broadcast at different volumes. The automa­tic volume limiting (AVL) function means the volume is kept the same when you switch between channels.
1 Select »AVL« with »P+« or »P-« and then select »On« with
»
Ǹ
« or »Ƿ«.
Equaliser
The equaliser offers you four preset sound settings (Music, Sport, Cinema and Dialogue) and one which you can create yourself (User).
1 Select »Equalizer« with »P+« or »P-« and confirm with
»OK«. – The »Equalizer« menu appears.
2 Select the audio setting »User« with »P+« or »P-« and confirm
with »OK«. – The frequency band »120 Hz« is activated.
3 Set the desired value with »P+« or »P-« and select the next
frequency band with »
Ǹ
« or »Ƿ«.
4 Press »
F
« (blue) to save the setting.
Concluding the settings
1 Press »i« to finish the settings.
SETTINGS
______________________________________________
Equalizer
Select Back and edit Exit
OK
User
ĵŁ
12 dB
0 dB
-12 dB <120Hz 200Hz 500Hz 1.2kHz 5kHz 7.5kHz 12kHz>
* Under license from Dolby Laboratories Licensing Corporation.
DOLBY and the Double-D symbol
ij are registered trademarks of the
Dolby Laboratories Licensing Corporation.
14
Basic functions
Switching on and off
1 Press »Ȃ« on the television set to switch it to standby. 2 Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
3 Press the »
Ǽ« button to switch the television to standby mode.
4 Press »
Ȃ« on the television set to switch it off completely.
– This saves electricity.
Selecting channels
1 Use »1…0« to select channels directly. 2 Press »P+« or »P-« to move up and down channels. 3 Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to switch off the channel list.
Selecting AV channels
1 Call up the »Source table« menu with »AV«. 2 Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3 Switch back to the television channel with »1…0«.
Adjusting the volume
1 Adjust the volume with »Ǹ« or »Ƿ«.
Muting
1 Use »p« to switch the sound off (mute) and to switch it on
again.
Displaying time
1 You can display the time by pressing the »Ȅ« button (only for
channels with teletext).
Displaying information
1 Press »?« to display the information.
– The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the frame of the current programme.
1 Press »ǷǷ« (yellow). 2 To quit this function, press »
ǷǷ
« again.
TELEVISION OPERATION
___________________
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
ENGLISH
15
Picture settings
You can select four different picture settings.
1 Select the desired picture setting from »User«, »Natural«,
»Rich« or »Soft« with »
z
«.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 12.
Audio settings
You can select six different audio settings.
1 Select the desired sound setting from »User«, »Music«, »Sport«,
»Cinema« or »Speech« with »
F
«.
– You can alter the »User« sound settings, see the ”Equaliser”
chapter on page 13.
Zap function
This function allows you to save the television channel which you are currently watching and switch to other channels (zapping).
1 Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by pressing »Z«. – The display »BBC 1« appears in the screen.
2 Change channels with »1…0« or »P+« »P-«. 3 You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching befo­re.
4 Press »
i« to quit the zap function.
– The display disappears.
TELEVISION OPERATION
___________________
16
Zoom function
This function enables you to enlarge the television or PC picture.
1 Press »
i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2 Select »Picture« with »P+« or »P-« and press »OK« to
confirm. – The »Picture« menu appears.
3 Select »Brightness« with »P+« or »P-« and press »P+« again.
– »Zoom« is selected.
4 Press »OK« to activate the zoom function. 5 Press »P+« or »P-« to change the size of the picture. 6 To change the picture section press »OK« and then »
Ǹ
«, »Ƿ«,
»P+« or »P-« to select the section.
7 Press »
i« to quit the zoom function.
– The display disappears.
TELEVISION OPERATION
___________________
Picture
Select Back and edit Exit
OK
H Position V Position Phase Auto position
Zoom
To Page 1
ENGLISH
17
Changing the picture format
The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket.
1 Select the picture format with »
E
«. The selected picture format, for example »16:9«, appears on the screen. – You can choose between the following picture formats:
»4:3« format
The picture is shown in 4:3 format.
»Auto« format
The picture format is automatically switched to »16:9« for 16:9 programmes. For programmes in 4:3 format, the picture automatically fills the screen.
»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizon­tally if »16:9« or »14:9« is selected. The picture geometry is stretched horizontally. With actual 16:9 signal sources (from a set-top box on the Euro-AV socket) the picture fills the screen completely and with the correct geometry.
»Letterbox« format
The letterbox setting is especially suitable for programmes in 16:9 format. The black borders which are usually at the top and bottom of the screen are eliminated, 4:3 pictures fill the screen. The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. The picture geometry remains unchanged. The »Auto Letterbox« message appears for PAL Plus television programmes.
»Panorama« format
This setting is suited to films with a large width/height ratio. During programmes in 4:3 format the picture is stretched horizon­tally if the »Panorama« function is selected. The picture geometry is stretched horizontally.
»Subtitles« format
If you cannot read the subtitles which appear on the bottom of the screen (especially during programmes with 4:3 format and if the »Subtitles« format is selected), then select »Subtitles«.
TELEVISION OPERATION
___________________
18
PIP mode
PIP (picture in picture) allows you to watch an inset picture from a second picture source in addition to the current channel. Other television stations, DVD players, video recorders or satellite receivers can be used as video sources. They must be connected to the input sockets on the back of the device.
Displaying the inset picture
1 To display the inset picture, press »PIP« once.
Double window
1 To activate the double window function (split screen), keep
pressing »PIP«. – The last selected main and inset pictures are shown next to
each other.
Selecting the channels for the inset picture and the left side of the screen (double window)
1 Press »P+« or »P-« to move up and down channel positions
one at a time.
Selecting the channels for the main picture and the right side of the screen (double window)
1 Press »1…0« to select channels directly, or select the video
source (DVD player, video recorder, SAT receiver); then call the »Source table« menu by pressing »AV«, select the desired AV channel position with »P+« or »P-« and press »OK« to confirm.
Swapping the main and inset pictures
1 Press »Z« to swap the main and inset pictures.
Changing the position of the inset picture
1 Press »P« to move the inset picture.
Changing the size of the inset picture
1 Press »S« to change the size of the inset picture.
Ending the PIP function
1 To hide the inset picture, press »PIP« twice.
Quitting the double window
1 To quit the double window, press »PIP«.
TELEVISION OPERATION
___________________
ENGLISH
19
TOP text or FLOF text mode
1 Press »TXT« to switch to teletext mode. 2 You can directly select teletext pages with »1...0«.
Note:
At the bottom of the screen, you will see an information line consisting of a red, green and, depending on the station, yellow and blue text field. Your remote control has buttons with the corresponding colours.
3 Press »
z
« (red) to scroll back a page.
4 Press »
Ȅ« (green) to scroll to the next page.
5 Press »
ǷǷ
« (yellow) to select chapters.
6 Press »
F
« (blue) to select topics.
7 Press »TXT« to switch off teletext mode.
Normal text mode
1 Press »TXT« to switch to teletext mode. 2 You can directly select teletext pages with »1...0«. 3 Press »P-« to scroll back a page. 4 Press »P+« to scroll to the next page. 5 Press »TXT« to switch off teletext mode.
Additional functions
Skipping the waiting time
While a page is being searched for, you can switch to the television channel.
1 Enter the teletext page number using »1…0« and then press
»P«. – As soon as the page is found, the page number is displayed.
2 Press »P« to switch to the teletext page.
Increasing character size
If you have difficulty reading the text on the screen, you can double the character size.
1 To enlarge the character size of a teletext page, press »?«
repeatedly.
TELETEXT MODE
_______________________________
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
20
Page stop
A multiple page may contain several sub-pages, which are automa­tically scrolled by the transmitting station.
1 Stop the sub-pages with »
E
«.
2 Press »
E
« to quit the function.
Calling up a sub-page directly
If the selected teletext page contains further pages, the number of the current sub-page as well as the total number of pages is displayed.
1 Call up the sub-pages with »S«. 2 Press »P-« to scroll back a page. 3 Press »P+« to scroll to the next page. 4 Press »S« to quit the function.
Reveal answer
Certain teletext pages contain ”hidden answers” or information which can be called up.
1 Display information with »SCAN«. 2 Conceal information with »SCAN«.
Split screen (Split Screen)
With this function you can see the television channel on the left and the teletext page on the right.
1 To activate the split screen function, press »PAT«.
– The television channel and the teletext page appear next to
each other on the screen.
2 To deactivate the split screen function, press »PAT«.
TELETEXT MODE
_______________________________
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
dd
AV
PIP
z
TV-G
Tele Pilot 170 C
SCAN
PAT
S
P
DVD
AUX
DR
TOP
MENU
MENU
ENGLISH
21
Convenience functions with the »Features« menu
1 To open the »MAIN MENU« press »i«. 2 Select »Features« with »P+« or »P-« and confirm with »OK«.
Note:
Further operation is explained in the following sections.
Changing the menu language
1 Select »Menu Language« with »P+« or »P-« and confirm with
»OK«. – The »Menu Language« menu appears.
2 Select the language with »P+«, »P-«, »
Ǹ
« or »Ƿ« and press
»OK« to confirm.
3 Press »
i« to finish the setting.
Entering the switch-off time for the sleep timer
You can enter a switch-off time. After this time has elapsed, the tele­vision switches to standby mode.
1 Select »Sleep timer« with »P+« or »P-« and press »OK« to
confirm.
2 To enter the switch-off time (from 15 to 120 minutes), press
»
Ǹ
« or »Ƿ«.
3 Press »
i« to conclude the setting.
Child lock
If the child lock is activated, the buttons on the television are not operable.
1 Select »Parental lock« with »P+« or »P-«. 2 Press »
Ǹ
« or »Ƿ« to activate or deactivate the child lock
(On or Off).
3 Press »
i« to conclude the setting.
Automatic picture format modification (Auto Blackline Detect)
If this function is activated and a programme with black bars at the top and bottom is showing, the picture is enlarged proportionally.
1 Select »Auto Blackline Detect« with »P+« or »P-«. 2 Press »
Ǹ
« or »Ƿ« to activate or deactivate the function.
3 Press »
i« to finish the setting.
CONVENIENCE FUNCTIONS
______________
Features
Select Back
and edit Exit
VCR mode
AV2 output TV
Off
Menu Language
AV output TV Sleep timer
Parental lock Off
Features
Select Back
and open Exit
VCR mode
AV2 output TV
Off
Menu Language
AV output TV Sleep timer
0
OK
Features
Select Back
and edit Exit
VCR mode
AV2 output TV
Off
Menu Language
AV output TV
Sleep timer 0
Auto Blackline Detect
Off
Auto Blackline Detect
Off
Features
Select Back
and edit Exit
VCR mode
AV2 output TV
Off
Menu Language
AV output TV Sleep timer
0
Auto Blackline Detect
Off
Parental lock Off
Parental lock
Off
Parental lock
Off
Auto Blackline Detect
22
USING EXTERNAL DEVICES
_______________
DVD player, DVD recorder, video recorder or set-top box
Note:
Which television socket(s) you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available.
Note that with many external devices the resolution of the video signal must be adapted to the input sockets on the television (check the external device’s instruction manual). You can find out which values you need to set by referring to the guidelines in the section about connection options.
Note:
Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it. Only plug the device into the mains socket after you have connected the external devices.
High definition – HD ready
Your television can receive high-definition television signals (HDTV). You can connect the input sources (HDTV set-top box or HDTV DVD
player) to the »HDMI« socket or »DVI-D« (digital HDTV signal). This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High-Definition Copy Protection).
Connecting a DVD player, DVD recorder, video recorder or set-top box
With a digital audio/video signal
Video signal: digital video; resolution: standard 576p; HDTV 720p, 1080i. Audio signal: digital audio (stereo, multi-channel compression, uncompressed). Channel position »HDMI«.
1 Connect the »HDMI« socket on the television and the corre-
sponding HDMI socket on the external device using a standard HDMI cable (digital video and audio signal).
D O
HDMI
PC-
PC-INDVI-D
AUDI
ENGLISH
23
With a digital audio/video signal
Video signal: digital video; resolution: standard 576p; HDTV 720p, 1080i. Audio signal: stereo, analogue. Channel position »DVI«.
1 Connect the »DVI-D« socket on the television and the corre-
sponding DVI socket on the external device using a standard DVI cable (digital video and audio signal).
2 Connect the »PC-DVI AUDIO-IN« socket (3.5 mm jack) on
the television to the corresponding sockets on the external device with cinch cables (audio signal).
With an analogue video signal (progressive)
Video signal: YUV; resolution: standard 576p; HDTV 720p, 1080i. Audio signal: stereo, analogue. Channel position »YPBPR«.
1 Connect the »COMPONENT VIDEO INPUT Y Pb Pr«
sockets on the television and the corresponding sockets on the external device using cinch cables (video signal).
2 Connect the »COMPONENT VIDEO INPUT L AUDIO R«
sockets on the television to the corresponding sockets on the external device using cinch cables (audio signal).
Using the Euro/AV socket
Video signal: FBAS/RGB (AV-1), FBAS (AV-2). Audio signal: stereo, analogue. Channel position »AV1« or »AV2«.
1 Connect the »AV 1« or »AV 2« socket on the television and
the corresponding socket on the external device using a EURO­AV cable (video and audio signal).
Note:
You can copy recordings via the television from one external device to another by connecting the playback device to the »AV 1« socket and the recording device to the »AV 2« socket, then selecting the »AV1« channel. However, you will not be able to watch a television channel.
Using the EURO/AV socket (S-Video signal)
Video signal: FBAS Y/C. Audio signal: stereo, analogue. Preset »AV2S«.
1 Connect the »AV 2« socket on the television and the
corresponding socket on the external device using a EURO-AV cable (video and audio signal).
USING EXTERNAL DEVICES ________
MI
Pb Pr
ANT IN
DVI-D
PC-DVI
PC-IN
AUDIO-IN
AUDIO
LR
COMPONENT VIDEO INPUT
HDMI
YPbPr
AV 2
AV 1
AV 2
AV 1
24
With S-Video signal
Video signal: Y/C. Audio signal: stereo, analogue. Channel position »SVHS«.
1 Connect the »S-VHS« socket on the television and the corre-
sponding socket on the external device using an S-Video cable (video signal).
2 Connect the »LR« sockets on the television to the correspond-
ing sockets on the external device using cinch cables (audio sig­nal).
With an analog TV signal
Video signal: FBAS. Audio signal: stereo, analogue. Channel position »AV3«.
1 Connect the »Video« cinch socket on the television and the
corresponding socket on the external device using cinch cables (video signal).
2 Connect the »LR« sockets on the television to the correspond-
ing sockets on the external device using cinch cables (audio sig­nal).
Using a video recorder, DVD player or set-top box
1 Switch on the video recorder, DVD player or set-top box and
select the function you wish to use.
2 Press »AV«, select the input signal channel with »P+« or »P-«
(»AV1«, »AV2«, »AV3«, »SVHS«, »HDMI«, »DVI« or »YPBPR«) and press »OK« to confirm.
Switching VCR mode on and off
On certain video recorders, you can improve the picture stability of the playback using this mode.
1 Press »AV«, select the channel with the connected VCR with
»P+« or »P-« and press »OK« to confirm.
2 Call up the »MAIN MENU« menu with »
i«.
– The »MAIN MENU« menu appears.
3 Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
4 Select »VCR mode« with »P+« or »P-« and select »On« with
»
Ǹ
« or »Ƿ«.
5 Press »
i« to conclude the setting.
USING EXTERNAL DEVICES
_______________
S-VHS
Features
Select Back
and edit Exit
VCR mode On
AV2 output TV
Menu Language
AV output TV Sleep timer
0
Auto Blackline Detect
Off
Parental lock
Off
S-VHS
R
L
R
Video
L
Video
ENGLISH
25
USING EXTERNAL DEVICES
_______________
Selecting the signal for the AV output
With this setting you can select which signal is output at the Euro-AV socket AV1 or at the AV OUT V L R cinch sockets.
The television station or the video/audio signal from connected devices.
This enables you to transmit recordings from one external device (e.g. a DVD player) to another using the television. Connect the playback device to Euro-AV socket AV1 and the recording device to Euro-AV socket AV2 and select the setting you require in the »Special functions« menu.
– AV 2 output:
»TV« – the television channel that you are viewing or »AV3« – the audio/video signal from the cinch sockets (AV3).
– AV output:
»TV« – the television channel that you are viewing or »AV2« – the audio/video signal from the Euro-AV socket AV2.
1 Call up the »MAIN MENU« menu with »
i«.
2 Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
3 Select »AV2 output« or »AV output« with »P+« or »P-«. 4 Select the desired option with »
Ǹ
« or »Ƿ«.
5 Press »
i« to conclude the setting.
Headphones
Connecting headphones
1 Plug the headphone jack (3.5 mm jack plug) into the head-
phone socket on the left side of the television.
Selecting the sound settings for the headphones
1 Press »i« to open the »MAIN MENU«. 2 Select »Sound« with »P+« or »P-« and confirm with »OK«. 3 Select »Headphones« with »P+« or »P-« and confirm with
»OK«.
4 Select »Volume«, »Balance«, »Bass«, »Treble« or »Soundtype«
with »P+« or »P-« and set with »
Ǹ
« or »Ƿ«.
5 Press »
i« to finish the setting.
Headphones
Select Back
and edit Exit
OK
Volume 30
Balance Sound type Bass Treble
Stereo
L
Features
Select Back
and edit Exit
VCR mode
AV2 output TV
Off
Menu Language
AV output TV Sleep timer
0
Auto Blackline Detect
Off
Parental lock
Off
S-VHS
R
L
Video
26
USING EXTERNAL DEVICES
_______________
Decoder or satellite receiver
In order for the television to receive encoded programs from a privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
1 Connect the »AV 1« socket on the television set and the appro-
priate socket on the decoder using a EURO-AV cable.
Using a decoder or satellite receiver
1 Switch on the television and the decoder or the satellite receiver. 2 Press »AV«, select the channel »AV1« with »P+« or »P-« and
press »OK« to confirm.
Decoder
AV 2
AV 1
AUDIO
LR
YPbPr
LRV
ANT IN
AV OUT
COMPONENT VIDEO INPUT
PAY-TV
AV 2
AV 1
PC-DVI
PC-INDVI-D
HDMI
AUDIO-IN
AC IN
ENGLISH
27
USING EXTERNAL DEVICES
_______________
Camcorder
Connecting the camcorder
1 Connect the yellow socket »Video« on the television and the
corresponding socket on the camcorder (VHS, Video 8) with a cinch cable (picture signal);
or connect the »S-VHS« socket (picture signal) on the television
and the corresponding socket on the camcorder (S-VHS, Hi 8) with a S-Video cable.
2 Connect the white and red sockets »L R« on the television and
the corresponding sockets on the camcorder with a cinch cable (audio signal).
Note:
There must not be video signals at »Video« and »S-VHS« sockets at the same time. This could lead to picture disturbances.
Operating with a camcorder
1 Switch on the camcorder, insert a cassette and start playback. 2 Press »AV«, select the »AV3« or SVHS« channel with »P+« or
»P-« and press »OK« to confirm.
Hi-fi system/AV receiver
Connecting the hi-fi system/AV receiver
1 Connect the white and red sockets »AV OUT L R« on the tele-
vision and the corresponding sockets on the hi-fi system/ AV receiver with a cinch cable.
2 Connect the yellow »AV OUT V« socket on the television to the
corresponding socket on the AV receiver using a cinch cable (video signal).
A
S-VHS
S-VHS
R
S-VHS
R
L
Video
L
R
L
Video
Video
LRV
AV OUT
WT–A
ANT IN
L
AV 2
AV 1
AUDIO
LR
LRV
ANT IN
AV OUT
COMPONENT VIDEO INPUT
YPbPr
PC-DVI
PC-INDVI-D
HDMI
AUDIO-IN
AC IN
28
Connecting a PC
1 Connect the socket »PC-IN« or »DVI-D« on the television to
the corresponding socket on the PC using a VGA cable.
2 Connect the socket »PC-DVI AUDIO IN« on the television to
the corresponding socket on the PC using a cinch cable (audio signal).
Note:
Adjust your PC to the monitor (for example, picture resolution 1024x768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« or »DVI« channel with »P+« or
»P-« and press »OK« to confirm.
Settings for the PC
1 Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2 Select »Picture« with »P+« or »P-« and press »OK« to
confirm. – The »Picture« menu appears.
3 Select »Brightness« with »P+« or »P-« and press »P+« again.
– The second page of the picture menu appears.
4 Press »P+« or »P-« to select the function or setting.
– Options:
»H Position« – adjust the horizontal picture position »V Position« – adjust the vertical picture position »Phase« – removes horizontal flicker, blurring and horizontal
lines
»Auto position« – for automatic adjustment to the PC
5 Press »OK« to activate the function and »
Ǹ
« or »Ƿ« to adjust.
6 Press »
i« to finish the setting.
PC MONITOR MODE
__________________________
Picture
Select Back and edit Exit
OK
H Position
V Position Phase Auto position Zoom
To Page 1
I-D
I-D
PC-IN
HDMI PC-IN
HDMI
PC-DVI
PC-DVI
AUDIO-IN
AUDIO-IN
AV 2
AV 1
AUDIO LR
LRV
ANT IN
AV OUT
COMPONENT VIDEO INPUT
YPbPr
PC-DVI
PC-INDVI-D
HDMI
AUDIO-IN
AC IN
ENGLISH
29
Setting television channels
This setting is only necessary if a new channel comes on air and you do not want to change the order of your channels. The television channel can be set directly or using the search.
Setting channels using the search
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
3 Select »Installation« with »P+« or »P-« and confirm with
»OK«.
4 Select »Program no« with »P+« or »P-« and set the preset
channel with »
Ǹ
« or »Ƿ«.
5 Select »Search« with »P+« or »P-« and start the search with
»
Ǹ
« or »Ƿ«.
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel you want appears on the screen.
Note:
The current system is automatically displayed in the »System« line. Select »System« with »P+« or »P-« if the colour or sound are incorrect. Select the setting required with »
Ǹ
« or »Ƿ«.
6 Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Note:
To set other television stations, repeat steps 3 to 6.
7 Press »
i« to finish the setting.
SPECIAL SETTINGS
______________________________
Setup
Select Back and open Exit
OK
ATS
Installation
Program table
Installation
Select Back and edit Exit
System
Program no
Channel Band
Search
Fine tuning
C
6
B/G
1
Store
Installation
Select Back and edit Exit
Program no System Channel Band Search Fine tuning
C
6
B/G
1
Store
OK
30
Fine tuning television channels
The television automatically tunes itself to the best possible recepti­on. You may need to carry out manual fine tuning in areas where there is poor reception.
1 Press »
i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
3 Select »Installation« with »P+« or »P-« and confirm with
»OK«.
4 Select »Fine tuning« with »P+« or »P-« and set it with »
Ǹ
«
or »Ƿ«.
5 Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
6 Press »
i« to finish the setting.
Setting the television channels by entering the channel numbers
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
3 Select »Installation« with »P+« or »P-« and confirm with
»OK«.
4 Select »Program no« with »P+« or »P-« and set the preset
channel with »
Ǹ
« or »Ƿ«.
5 Select »Band« with »P+« or »P-«. 6 Press »
Ǹ
« or »Ƿ« to choose between »S« (special channel)
and »C« (channel).
7 Select »Channel« with »P+« or »P-«. 8 Press »
Ǹ
« or »Ƿ« to switch up and down channels or use
»1…0« to enter the channel number directly.
Note:
The current system is automatically displayed in the »System« line. Select »System« with »P+« or »P-« if the colour or sound are incorrect. Select the setting required with »
Ǹ
« or »Ƿ«.
9 Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Note:
To set the other television stations, repeat steps 3 to 9.
10 Press »
i« to finish the setting.
SPECIAL SETTINGS
______________________________
Installation
Select Back and edit Exit
Program no System Channel Band Search
Fine tuning
C
6
B/G
1
Store
Installation
Select Back and edit Exit
Program no System
Channel
Band Search Fine tuning
C
B/G
1
Store
ǵ
Setup
Select Back and open Exit
OK
ATS
Installation
Program table
6
Installation
Select Back and edit Exit
Program no System Channel Band Search Fine tuning
C
6
B/G
1
Store
OK
ENGLISH
31
Re-tuning all television channels
You can re-tune all the television stations, for example if you move to another town.
1 Press »
i« to open the »MAIN MENU«.
2 Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
3 Select »ATS« with »P+« or »P-« and confirm with »OK«.
– The »ATS« menu appears.
4 Press »
Ǹ
« or »Ƿ« to select the country.
5 Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«. – A warning message appears.
6 Press »
Ȅ« (green) to start the search.
– The search begins. It may last a few minutes, depending on
the number of television stations found.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »OK«.
SPECIAL SETTINGS
______________________________
ǵ
ATS
Select Back and edit Exit
Country
Autoprogram
ǵ
Setup
Select Back and open Exit
OK
ATS
Installation
Program table
United Kingdom
32
Technical data
Operating voltage: 230 V, 50/60 Hz Power consumption: in operation 120 W
in standby approx. 2 W (Lenaro 27) in operation 165 W in standby approx. 2 W (Lenaro 32)
Sound output: 2 x 14 watts music (2 x 7 sine wave)
(Lenaro 27) 2 x 20 watts music (2 x 10 sine wave)
(Lenaro 32) Reception range: C01 … C80, special channels S01 … S41 Preset channels: 99 and 8 AV Screen size: 70 cm/27“ (Lenaro 27)
81 cm/32“ (Lenaro 32) Max. resolution: WXGA 1366 x 768 Weight (WEEE): approx. 14,21 kg (Lenaro 27)
approx. 20,91 kg (Lenaro 32)
Service information for dealers
The television set may only be operated with the mains adapter sup­plied. The product complies with the following EU directives: 73/23/EEC directive for electrical equipment to be used within defined voltage ranges. 89/336/EEC directive on electromagnetic compatibility. The device complies with the following standards: EN 60065, EN 55013, EN 55020.
Environmental note
This product has been made from high-quality parts and materials which can be re-used and recycled.
Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. Help protect the environment by recycling used products.
INFORMATION
_____________________________________
Subject to alteration and correction!
ENGLISH
33
INFORMATION
_____________________________________
Fault
Screen lit (snow), but no station
Poor picture contrast
Interference to picture and/or sound
Ghosts, reflection
No colour
Picture but no sound
Teletext missing or faulty
Remote control does not work
Picture is dark in PC mode
Possible cause
Antenna cable
No television station pro­grammed
Picture settings incorrectly set
Problem at station
Interference from other devices
Channel setting
Antenna
Colour intensity at minimum TV standard setting (if
setting option is available) Problem at station Volume set to minimum
Problem at station Television station (has no
teletext) or antenna system Station signal too weak No optical connection
Remote control batteries
Operating condition unde­fined
Incorrect setting for picure resolution and picture fre­quency on the PC
Remedy
Is the antenna cable connected?
Start the station search
Adjust the brightness, contrast or colour setting
Test with another channel
Change the position of the device
Automatic or manual chan­nel setting/fine tuning
Have antenna cable or system checked
Turn up the colour Select the correct colour
standard Test with another channel Turn up or switch on the
volume Test with another channel Test another channel for
fine tuning and ghosts Check the antenna system Point the remote control at
the television set Check the batteries, change
if necessary Switch off the television
with the main power button for approximately 2 minutes
Change the setting on the PC (for example, picture resolution 1024x768, pic­ture frequency 60Hz)
Troubleshooting
If the remedies given below do not work, please consult an authori­sed GRUNDIG dealer. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel­lite receivers.
34
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European coun­tries. However, the mains plug and socket system for the UK differs from many European countries. This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. This converter plug is fitted with a 5A rated fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only, which is unsuitable for UK operation, this must be cut off and immediately disposed of. An approved 13A, 3-pin UK plug should then be fitted by a qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any other type of plug is used it must be protected by a 5A fuse either in the plug, or at the distribution board. If this type of plug becomes defective, ensure that the fuse is removed before disposal, to eliminate potential shock hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct type and rating (5A ASTA or BSI approved BS1362) must be used and the fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and plug must not be used until a replacement is obtained. Replacement fuse covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo­wing code:
BLUE – NEUTRAL BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor­respond with the coloured marking identifying terminals in your plug, pro­ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N” or coloured black. Connect the BROWN coloured wire to the plug terminal marked with the let­ter “L” or coloured red. In no circumstance must any of the wires be connected to the terminal mar­ked with the letter “E”, earth symbol “
z”, coloured green, or green & yel-
low.
INFORMATION
_____________________________________
Grundig Multimedia B.V. • Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com
Loading...