Grundig LXW 68-9620, LXW 82-9620 User Manual
COLOR
TELEVISION
VISION II 26
LXW 68-9620 DOLBY
VISION II 32
LXW 82-9620 DOLBY
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
TÜRKÇE
POLSKI
ǵ
CONTENTS
____________________________________________
3-4 Set-up and safety
5-6 Connection/Preparation
5 Connecting the antenna and the mains cable
6 Inserting batteries in the remote control
7-9 Overview
7 Connections on the television
8 The remote control (TV mode)
9 The remote control (teletext mode)
9 Operating controls on the television
10 Settings
10 Setting television channels automatically
10 Picture and sound settings
11 Easy Dialog System
11 The »Easy Dialog System« interactive operating instructions
12-13 Television operation
12 Basic functions
13 Zap function
13 Alphanumeric channel selection
14 Teletext mode
14 TOP text or FLOF text mode
14 Normal text mode
14 Additional functions
14 Double window function
15-18 Information
15 Technical data
15 Service information for dealers
15 Environmental note
16-17 Troubleshooting
18 Additional Information for units sold in the UK
2
SET-UP AND SAFETY
! SERVICE !! SERVICE !
___________________________
10
cm
20
cm
! SERVICE !
20 cm
Krieg am Golf
10
cm
Please note the following information when setting up your television set.
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar items
beneath it.
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
Ensure that the mains cable and the mains adapter are not damaged.
The television set may only be operated with the mains cable/adapter
supplied.
TV R
Thunderstorms are a danger to all electrical devices. Even if the television set is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always disconnect the mains and antenna
plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.
ENGLISH
3
SET-UP AND SAFETY
Please note when deciding where to put the device that furniture
surfaces are covered by various types of lacquer and plastic, most
of which contain chemical additives. These may cause corrosion to
the feet of the device, thus resulting in stains on the surface of the
furniture which can be difficult or impossible to remove.
The screen of your LCD television meets the highest quality
standards and has been checked for pixel faults.
Despite the great care taken in manufacturing, technological
reasons make it impossible to completely discount the possibility that
some pixels may be faulty.
Provided they are within the thresholds specified by the DIN norm,
pixel faults of this kind cannot be regarded as a defect as defined
by the warranty.
___________________________
4
CONNECTION/PREPARATION
Connecting the antenna and the mains cable
__________
3
2 1
TV R
1 Plug the antenna cable of the rooftop antenna into the »É«
antenna socket on the television.
2 Plug the mains cable supplied into the mains socket of the televi-
sion.
3 Plug the mains cable into the wall socket.
Notes:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
The connected devices have to be set in the »Installation« menu
at the »Devices« point.
Detailed notes can be found in the »Easy Dialog System« interactive operating instructions.
Consult page 11 and the following pages to see how to use the
Easy Dialog System.
ENGLISH
5
CONNECTION/PREPARATION
High definition – HD ready
Your television can receive high-definition television signals (HDTV).
You can connect the input sources (HDTV set-top box or HDTV DVD
player) to either the »
»
Y Pb Pr
This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High-Definition Copy Protection).
« socket (analogue HDTV signal).
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert the batteries (Mignon type, for example UM-3 or AA,
2x1,5V). Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to remove
used batteries.
The manufacturer accepts no liability for damage resulting from
used batteries.
Environmental note
Batteries, including those which contain no heavy metal, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
DVI
« socket (digital HDTV signal) or the
__________
6
Loading...