Groen HY-5E User Manual

HYPERSTEAM PRESSURELESS STEAMER

PROJECT NAME:

LOCATION:

ITEM NO:

MODEL HY-5E/EF

Steamer shall be a Groen Model HY-5E stainless steel pressureless steamer with a self-contained atmospheric

15.5 KW electric steam generator, per Bulletin 140807, as follows.

CONSTRUCTION: Steamer cavity and cabinet

shall be all stainless steel construction, with removable
right and left-side panels, providing access to internal
components. Steamer door is all stainless steel with a
strong continuous hinge and is field-reversible for left
or right-swing, door shall be provided with a one-piece,
replaceable seal. Easy-open handle and latch shall
provide positive lock and seal when door is pushed or
slammed shut. Hidden magnetic door switch cuts power
to blower and cuts power to generator when the door is
opened. Pan support racks shall be polished stainless
steel and removable for easy cleaning. A stainless steel
condensate collection tray is positioned under cavity
door.

FINISH: Cabinet exterior, including door, shall be

finished to a #3 uniform finish. Cavity interiors are
polished stainless steel. Control panel face plates
shall be smudge-resistant polyester film, ensuring
maximum ease in cleaning and maintaining an attractive
appearance.

UL LISTING: Steamer shall be UL-listed and

Canadian UL-listed.

SANITATION: Unit shall be designed and

manufactured to meet NSF requirements and be
NSF-listed. Unit shall allow operator to delime steam
generator through access port on top without tools or
service call. Push button auto-delime feature is standard.

distribution throughout cavity and between loaded
pans. Steam generator delivers 3.1 KW power
input per 2 1/2” deep steam pan. Heat-up time to
READY shall be 8-10 minutes or less, under normal
conditions. Cavity is kept warm and ready for instant
steam between loads. No cavity warm up required,
after READY light comes on. DELIME indicator light
warns operator of need to delime steam generator.
Unit will shut off if water level is low. When power is
turned “off”, unit automatically blows down the steam
generator to reduce sediment build-up.

ATMOSPHERIC STEAM GENERATOR:

Unit shall have an electric-heated, rear-mounted
steam generator to provide atmospheric steam to the
chamber at a temperature of approximately 212°F.
Steam generator has an electric water sensor. Electric
heating elements are replaceable from the side.

PAN CAPACITY:

Pan Size/Type Number

12 x 20 x 1” 10

12 x 20 x 2 1/2” 5

12 x 20 x 4” 3

INSTALLATION: Unit requires 208, 240 or

480 Volt, single or three-phase electric service. Unit
requires dual 3/4” NH cold water supply lines and 2”
free venting drain.

QTY:

MODEL NO:

AIA NO:

SIS NO:

5-Pan capacity stainless steal pres­sureless steamer, table top, self­contained, electric-heated.
(model HY-5E shown)

OPTIONS/ACCESSORIES:

Groen PureSteem™ Water

Treatment System

Factory stacking kit
Stainless steel support stand
Pan racks for support stand
4” adjustable legs
Single water connection (cold

water)

CONTROLS: Steamer controls shall include an

ON-OFF power button; 60-minute electro-mechanical
timer, with continuous steam setting; and READY light
which indicates when cavity is ready for steaming. Auto­Delime button initiates deliming cycle.

PERFORMANCE FEATURES: Steamer cavity

shall have a powerful side-mounted blower, which
increases steam velocity and provides efficient steam

WATER SUPPLY REQUIREMENTS:

All steam systems are subject to contamination
and failure due to mineral content found in all
water supplies. To minimize service problems, a
Groen PureSteem™ Water Treatment System is
recommended.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

HyPerSteam

140807 RevC

Revised 04/11

74.5

64.61

38.2

1

44.0

3

3

AMPS

240

KW

MAX.

PHASE

VOLTAGE

208

480

3 19.1

––– –––

15.5

15.5

15.5

15.5
–––

15.5

ELECTRICAL REQUIREMENTS

8"

1 1/4"

TABLE TOP OR COUNTER
(CUSTOMER PROVIDED)

[203]

[32]

3"

21 11/16"

3"

15 19/32"

[76]

[551]

[76]

[397]

REAR OF TABLE

OR COUNTER

TABLE TOP OR COUNTER

OPTIONAL 4" LEGS

MOUNTING HOLES IN BASE
USE 3/8" 16 BOLTS WHICH
MUST NOT EXTEND INTO STEAMER
BY MORE THAN 3/8" [10]

30 13/16"

[783]

SERVICE CONNECTIONS & NOTES:

1 DRAIN CONNECTION: 2" [50.8] TUBE (DRAIN FREE VENTING).

2

3ONE ELECTRICAL CONNECTION: 1" [25.4] CONDUIT FITTING.

4 MINIMUM REAR AND SIDE CLEARANCE: REAR = 6" [152.4]

LEFT SIDE = 2" [50.8] RIGHT SIDE = 2" [50.8]

21 5/8"

[549]

22 1/2"

[571]

30 1/8"

[765]

23

4

2"

[51]

4

1

11/16"

[17]

6

[152]

15"

[381]

3

[520]

20 1/2"

2

FRONT VIEWSIDE VIEW

OPTIONAL SUPPORT STAND

21 9/16"

[548]

6"

[152]

1 1/2" [38] MINIMUM
2 5/8" [67] MAXIMUM

FINISHED FLOOR

33 3/8"

[772]

OPTIONAL RACKS TO
HOLD (6) STEAMER PANS

29 3/4"

[756] MIN

50 9/16"

[1284] MIN

1

UNTREATED
WATER
SUPPLY
CONNECTION

DETAIL VIEW

OF WATER CONNECTIONS

(IF 2nd CONNECTION ORDERED)

REAR OF STEAMER

DIMENSIONS IN BRACKETS [ ] ARE MM.5

1

1

1 1/4"

[32]

1

1 5/8"

[41]

UNIT FUSE

BOX

17 3/8"

[441]

4

[51]

2"

[1092]

43" MIN

[1232]

48 1/2"

3

2

[713] MIN

28 1/16"

COLD WATER SUPPLY AT 30 TO 60 PSIG WITH A FLOW RATE OF

0.75 - 1.50 GPM AND WITH A 3/4" NH CONNECTION.

TREATED
WATER
SUPPLY
CONNECTION

HY-5E/EF

P/N 125999 REV B

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.