Groen FT-80 User Manual

DIRECT STEAM KETTLE

PROJECT NAME:

LOCATION:

ITEM NO:

MODEL FT

Kettle shall be a Groen Model FT (Specify 20, 40, 60, 80, 100, 125 or 150-gallon)
stainless steel, 2/3 steam jacketed unit operating from direct steam.

CONSTRUCTION: Kettle shall be of type 316

stainless steel, with solid one-piece welded construction.
Unit shall be provided with a heavy, durable bar rim
with a continuous seal weld on the underside to ensure
maximum durability and sanitation. Unit provided with
faucet bracket as standard.

FINISH: Interior of kettle shall be polished to a 180

emery grit finish. Exterior of kettle shall be finished to
a bright high buff finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.

ASME CODE: Unit shall be ASME shop-inspected,

stamped and registered with the National Board for
operation up to a maximum working pressure of 25 PSI.

MOUNTING: Unit shall be mounted on an all

stainless steel, tubular legs, continuously welded to
kettle, with stainless steel adjustable floor flanges.
Floor flanges and mounting bolts shall be provided
with sanitary covers.

INSTALLATION: Remote steam source required.

Steam trap assembly is required and not provided
unless ordered as an option. See dimension L on
other side for steam inlet size and number.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

SHORT FORM: Stainless Steel

2/3 Steam Jacketed Kettle, Floor
Mounted, Stationary, Direct Steam,
20 to 150-gallon capacities.
(model FT shown)

SANITATION: Unit shall be designed and

constructed to be NSF-listed, meeting NSF and all known
health department and sanitation codes.

DRAWOFF: Unit shall have a 2” sanitary tangent

drawoff which is a 316 stainless steel compression disc
drain valve, for easy disassembly without tools. Larger
3” drawoff available. The drain outlet shall be equipped
with a removable 1/4” perforated stainless steel strainer.

COVER: Cover shall be one piece stainless steel

dome shaped and hinged. Counterbalanced #51 spring
assisted cover for 60, 80, 100, 125 and 150 gallon
units.

STEAM PRESSURE: Kettle shall operate

dependably at any steam pressure between 5 and 25
PSI. Higher working pressures available.

OPTIONS/ACCESSORIES:

Basket inserts (TRI-BC)
Water fill faucets
Higher working pressure
3” tangent drawoff
Cold water cooling
Steam trap assemblies
Kettle brush kit
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Steam regulators
Contour measuring strip
Gallon etch marks

Steam Kettles

160169F Revised 04/12

Stainless Steel 2/3 Steam Jacketed Kettle, Floor Mounted, Stationary,

P/N 146528 REV E

Direct Steam, 20 to 150-gallon capacities. (model PT-40 shown)

MODEL FT

P/N 123001 REV B

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2011 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.