Direct Steam Kettle model FT
Description
Kettle shall be Groen Model FT (specify 40, 60, 80, 100, 125 or 150-gallon) stainless steel, 2/3 jacketed unit operating from direct steam.
Construction
Kettle shall be of type 316 stainless steel, solid one-piece welded construction. Unit shall be provided with a heavy, durable bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. Unit provided with faucet bracket as standard.
Finish
Interior of kettle shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.
ASME Code
Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI.
Sanitation
Unit shall be designed and constructed to meet NSF and known health department and sanitation codes, and be NSF listed.
Drawoff
Unit shall have a 2” sanitary tangent drawoff which is a 316 stainless steel compression disc drain valve, for easy disassembly without tools. Larger 3” drawoffs available. The drain outlet shall be equipped with a removable 1/4” perforated stainless steel strainer.
Cover
Cover shall be one piece stainless steel dome shaped cover, hinged and counterbalanced, with Model 51 spring assisted cover actuator.
Steam Pressure
Kettle shall operate dependably at any steam pressure between 5 and 25 PSI. Higher working pressure available.
Mounting
Unit shall be mounted on an all stainless steel, tubular legs, continuously welded to kettle, with stainless steel adjustable floor flanges.
Installation
Remote steam source required. Steam trap assembly is required and not provided unless ordered as an option. See dimension L on other side for steam inlet size and number.
Model FT shown
Options/Accessories
Basket inserts (TRI-BC)
Water fill faucets
Higher working pressure
3” tangent drawoff
Cold water cooling
Steam trap assemblies
Kettle brush kit
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Steam regulators
Contour measuring strip
Gallon etch marks
Origin of Manufacture
Kettle shall be designed and manufactured in the United States.
Stainless Steel
2/3 Steam Jacketed Kettle
Floor Mounted Stationary Direct Steam 40 to 150-Gallon Capacities
Short Form
Groen Model FT (Specify gallons) stainless steel, 2/3 jacketed, direct steam stationary kettle. Solid one piece welded construction, with heavy duty reinforced bar rim. 2” sanitary tangent drawoff standard. Standard units fitted with faucet bracket and one piece dome cover with spring assisted cover actuator. NSF listed, ASME code constructed for 25 PSI. Unit to be mounted on stainless steel tubular legs, continuously welded to kettle, with stainless steel adjustable floor flanges. Made in USA.
Applications
Wet roasting meats
Soups
Stews
Stocks
Poultry
Sauces
Pie Fillings
Vegetables
Pasta
Rice
Gravies
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most updated product information and specifications.
Groen Direct Steam Kettle, Page 2
160169C
Revised 07/10
<![endif]>net.unifiedbrands 7636,-994-888 39272, MS Jackson, Drive, Davis Mendell 1055 of subsidiary owned-wholly a is Brands Unified .Reserved Rights All .Brands Unified 2009 © .Corporation Dover
ASME APPROVED
SAFETY VALVE
|
(3) 7/16 DIA. |
90° |
CONDENSATE |
HOLES TYP. |
|
|
|
|
OUTLET |
|
|
STEAM INLET
P
B
30°
OPTIONAL
FAUCET
FRONT OF KETTLE
PLAN VIEW OF LEGS
C
TOP VIEW
NOTE : COVER NOT SHOWN IN THIS VIEW
A
KETTLE I.D.
J
COVER OPEN
R
FAUCET BRACKET (REMOVABLE)
STRAINER |
|
AND STAY |
S |
|
"N"-NPT |
2" DRAWOFF |
|
|
|
|
STEAM INLET |
(51) VALVE |
|
|
|
|
|
E |
|
|
|
|
K |
|
5 1/2 |
F |
H |
L |
|
G |
(140) |
|
ADJUSTABLE S.S. |
|
|
|
7 1/2 |
|
|
|
|
|
|
FLOOR FLANGES |
|
|
|
|
(191) OPEN |
|
|
|
|
|
|
|
|
|
|
|
|
|
FLOOR DRAIN - SEE NOTE 4 |
|
FRONT VIEW |
RIGHT SIDE VIEW |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TABLE OF DIMENSIONS
CAP. |
20 |
40 |
60 |
80 |
100 |
|
GAL. |
||||||
|
|
|
|
|
DIM. INCH MM INCH MM INCH MM INCH MM INCH MM
A |
20 |
508 |
26 |
660 |
30 |
762 |
32 |
813 |
36 |
914 |
|
|
|
|
|
|
|
|
|
|
|
B |
27 1/2 |
699 |
33 |
838 |
37 |
940 |
38 |
965 |
40 |
1016 |
|
|
|
|
|
|
|
|
|
|
|
C |
24 |
610 |
30 |
762 |
34 |
864 |
36 |
914 |
40 |
1016 |
|
|
|
|
|
|
|
|
|
|
|
D |
59 |
1499 |
65 |
1651 |
67 |
1702 |
73 |
1854 |
77 |
1956 |
|
|
|
|
|
|
|
|
|
|
|
E |
36 |
914 |
36 |
914 |
39 |
991 |
43 |
1092 |
44 |
1118 |
|
|
|
|
|
|
|
|
|
|
|
F |
12 |
305 |
14 1/2 |
368 |
15 |
381 |
15 |
381 |
15 |
381 |
|
|
|
|
|
|
|
|
|
|
|
G |
15 3/4 |
400 |
11 3/4 |
299 |
11 3/4 |
299 |
11 3/4 |
299 |
11 3/4 |
299 |
|
|
|
|
|
|
|
|
|
|
|
H |
5 1/2 |
140 |
7 |
178 |
8 |
203 |
8 |
203 |
8 |
203 |
|
|
|
|
|
|
|
|
|
|
|
J |
8 |
203 |
10 1/4 |
260 |
11 1/2 |
292 |
12 1/4 |
311 |
13 1/2 |
343 |
|
|
|
|
|
|
|
|
|
|
|
K |
18 7/8 |
479 |
15 3/4 |
400 |
16 1/4 |
413 |
16 1/2 |
419 |
17 1/2 |
445 |
|
|
|
|
|
|
|
|
|
|
|
L |
17 |
432 |
14 |
356 |
13 1/2 |
343 |
14 |
356 |
14 |
356 |
|
|
|
|
|
|
|
|
|
|
|
M |
1/2 |
- |
1/2 |
- |
1/2 |
- |
3/4 |
- |
3/4 |
- |
|
|
|
|
|
|
|
|
|
|
|
N |
1/2 |
- |
3/4 |
- |
3/4 |
- |
1 |
- |
1 |
- |
|
|
|
|
|
|
|
|
|
|
|
P |
9 1/4 |
235 |
11 3/4 |
299 |
13 1/2 |
343 |
14 1/4 |
362 |
15 7/8 |
403 |
|
|
|
|
|
|
|
|
|
|
|
R |
18 |
457 |
25 |
635 |
- |
- |
- |
- |
- |
- |
|
|
|
|
|
|
|
|
|
|
|
S |
18 1/2 |
470 |
22 |
559 |
25 |
635 |
29 |
734 |
30 |
762 |
|
|
|
|
|
|
|
|
|
|
|
T |
14 |
356 |
16 |
406 |
17 |
432 |
17 |
432 |
17 |
432 |
|
|
|
|
|
|
|
|
|
|
|
U |
14 3/4 |
375 |
10 3/4 |
273 |
10 3/4 |
273 |
10 3/4 |
273 |
10 3/4 |
273 |
NOTES:
1.KETTLE MUST BE SECURELY ANCHORED TO FLOOR.
FLOOR FLANGES ARE THREADED AND HEIGHT ADJUSTABLE.
2.SANITARY (1) PIECE DOME COVER SHOWN - FURNISHED
DON 20 & 40 GALLON SIZES.
3.MODEL # 51 COUNTER BALANCED COVER FURNISHED ON KETTLES 60 GALLONS AND OVER.
4.POSITION CENTER OF TANGENT DRAWOFF SPOUT 4"-5" OVER FLOOR DRAIN FOR PROPER DRAINAGE.
5.DIMENSIONS IN BRACKETS ( ) ARE MM.
"M"-NPT |
|
<![if ! IE]> <![endif]>123001 P/N |
|
|
|
|
|
CONDENSATE |
U |
T |
|
|
<![if ! IE]> <![endif]>Model |
||
OUTLET |
|
<![if ! IE]> <![endif]>REV123001P/NAREV. |
|
|
|
|
|
|
|
OPTIONAL 3" |
|
|
|
TANGENT DRAWOFF |
|
|
|
<![if ! IE]> <![endif]>A |
<![if ! IE]> <![endif]>FT |