Groen EE-100 User Manual

FLOOR KETTLES

PROJECT NAME:

LOCATION:

ITEM NO:

STATIONARY ELECTRIC MODEL EE

Kettle shall be a Groen Model EE (Specify 20, 40, 60, 80 or 100 gallon) stainless steel, self-contained, steam
jacketed unit operating from an electric heated steam source contained within unit.

AVAILABLE MODELS:

EE-20 (20 GALLON)
EE-40 (40 GALLON)
EE-60 (60 GALLON)
EE-80 (80 GALLON)
EE-100 (100 GALLON)

CONSTRUCTION: Kettle proper shall be of type

316 stainless steel, solid one-piece welded construction.
All exposed surfaces shall be stainless steel. All controls
shall be contained within the cabinet. Kettle body is
sheathed in stainless steel and air gap insulated. Faucet
mounting bracket is standard.

FINISH: Interior of kettle shall be polished to a 180

emery grit finish. Exterior of kettle shall be finished to
a #3 finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.

COVER: Cover shall be a one-piece, hinged design

dome cover on units up to 40 gallons. 60-100-gallon
units shall have a one-piece domed cover with No.
51 counter balanced spring-assisted actuator.

CONTROLS: All controls shall be contained in

a stainless steel enclosure within easy reach of the
operator. Controls include a thermostat, pilot light,
pressure/vacuum gauge, contactor, water level sight
glass, safety valve and low water cut-off.

SELF-CONTAINED STEAM SOURCE:

Kettle shall have an electric, self-contained steam
source to provide kettle temperatures from 150 to
approximately 270˚F. Unit shall be factory charged
with chemically-pure water and rust inhibitors to
ensure long life and minimum maintenance.

QTY:

MODEL NO:

AIA NO:

SIS NO:

Stainless Steel Steam Jacketed
Kettle, Floor Mounted, Stationary,
Self-Contained, Electric Heated,
20,40,60,80 or 100- Gallon Capacity.
Model EE-40 shown.

ASME CODE AND UL LISTING: Unit shall be

ASME shop inspected, stamped and registered with the
National Board for operation up to a maximum working
pressure of 30 PSI. Unit shall be UL listed for sale in
USA and Canada. Unit shall be registered in Canada
with a CRN number.

SANITATION: Unit shall be designed and

constructed to meet NSF and known health department
and sanitation codes, and be NSF listed.

DRAWOFF: Unit shall have a 2” sanitary tangent

drawoff with a 316 stainless steel compression disk
drain valve for easy disassembly without tools. Larger
3” drawoff available. The drain outlet shall be equipped
with a removable 1/4” perforated stainless steel strainer.

PERFORMANCE: Unit to be thermostatically

controlled to shut off automatically when desired
temperature is reached and turn on when product
temperature falls below desired setting. Outer
sheathing and air insulating gap retains heat and
keeps kettle exterior cooler to the touch.

INSTALLATION: Unit requires single electrical

connection. Specify 208, 240, or 480 Volt, three
phase, 50 or 60 HZ. 20 and 40 gallon models
available in single phase.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

OPTIONS/ACCESSORIES:

3” tangent drawoff valve with1/4”

perforated disk strainer
1/8” perforated disk strainer
1/4” perforated disk strainer
Sold disk strainer
Basket inserts (TRI-BC)
Swing faucets
Automatic water filler
Kettle brush kit
Contour measuring strip
Gallon etch marks
Single Phase Terminal Block Kit

Floor Kettles

147499 RevG

Revised 10/13

P/N 121500 REV H

EE

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.