Groen DEE-4T-40 User Manual

COOKER/MIXERS

PROJECT NAME:

LOCATION:

ITEM NO:

FLOOR MOUNTED TWIN SHAFT AGITATOR ELECTRIC MODEL DEE

Cooker/Mixer shall be a Groen Model DEE/4T-40 or 60, TA/3 gallon (specify 40 or 60) stainless steel, self­contained, 2/3 steam jacketed unit operating from an electric heated steam source contained within unit and
complete with console mounted tilt out twin shaft scraper mixer.

AVAILABLE MODELS:

DEE/4T-40 TA/3 (40 GALLON)
DEE/4T-60 TA/3 (60 GALLON)

CONSTRUCTION: Kettle interior shall be of 316

stainless steel, solid one-piece welded construction.
The control console and kettle exterior shall be 304
stainless steel. The kettle body shall be mounted on a
heavy duty stainless steel, combination kettle support
tilt trunnion which is supported by the polished stainless
steel enclosed base. The kettle shall be furnished with
heavy duty reinforced rim with a butterfly shaped pouring
lip for maximum sanitation and ease of pouring. The
base shall be provided with stainless steel tubular legs
with adjustable flanged feet. The enclosed support
base shall contain a self-locking worm and gear tilt
mechanism, contactor, etc., and shall be of sanitary
drip-proof construction with interior readily accessible for
installation or maintenance. Unit includes 2” TDO and
10-gallon etch markings and double pantry faucet.

FINISH: Interior of kettle shall be polished to a 180

emery grit finish. Exterior of kettle shall be finished to
a bright semi-deluxe finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.

AGITATOR ASSEMBLY: Enclosed transfer case

to be cast aluminum with a 3-to-1 gear ratio. Gear
motor to be completely enclosed-type, cast iron housing,
right angle shaft down, helical bevel gearing, variable
speed motor driven through an electronic speed control.
See table on back for minimum and maximum agitator
speeds. Main agitator to be anchor-type, shaped to the
contour of the kettle and provided with removable nylon
finger scrapers. The secondary counter-rotating bar type
agitator shall be centrally-located between the center
shaft and the outside arms of the main agitator. Both
agitators are attached with bayonet connections for easy,
quick removal for cleaning or when kettle is to be used
without the mixing mechanism. Both agitators are 304
stainless steel and either can be used alone. Agitator

and motor drive assembly can be manually tilted to
the right side of kettle.

ASME CODE & UL LISTING: Unit shall be

ASME shop inspected, stamped and registered with
the National Board for operation up to a maximum
working pressure of 50 PSI. Kettle is UL listed.

SANITATION: Unit shall be designed and

constructed to meet NSF requirements, and be NSF
listed.

SELF CONTAINED STEAM SOURCE:

Kettle shall have an electrically heated self-contained
steam source to provide kettle temperatures of 150°F
to approximately 295°F. Unit shall be factory charged
with water and rust inhibitors to ensure long life and
minimum maintenance.

CONTROLS: Controls shall include a thermostat,

built in contactor, pressure gauge, water sight glass,
heat indicator lamp, tilt safety switch, agitator on-off
switch and double-pantry faucet with bracket.
Agitator to be electronic, variable speed control-type
capable of operation at any RPM between minimum
and maximum settings.

SAFETY FEATURES: Kettle shall have safety

cut-off (cuts off heat when tilted to 12°F and above),
pressure relief valve, high limit pressure switch and
low water cut off, 24V control system, and agitator
safety tilt cut off.

INSTALLATION REQUIREMENTS: Unit

requires two electrical connections, standard 208
volt, 3-phase for kettle; Standard 208 volt, 3-phase
for agitator motor.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

Stainless Steel 2/3 Steam Jacketed
Cooker/Mixer, Floor Mounted, Tilting,
Self-Contained, Electric Heated,
40 and 60-Gallon Capacities With
Twin Shaft Agitator. (Model DEE/4T­60,TA/3 shown).

OPTIONS/ACCESSORIES:

Disk strainers (not to be used

with agitator)

240, 480 Volt power supply

(specify for kettle or motor)

Kettle brush kit
Pan carrier
Wall mount with in-wall carrier
Gallon master
Basket insert
Lip strainers
Contour measuring strips

Cooker/Mixers

141048 RevC

Revised 04/12

P/N 140906 REV A

DEE

C

(737)

29

E

TANGENT DRAWOFF

(OPTIONAL)

CONTROL BOX MAY BE

MOUNTED REMOTELY TO

4

AN ADJACENT WALL

(BY CUSTOMER)

A ID

2"

3 1/2

(89)

4 1/2
(114)

2

6

(152)

11 5/8

B

3-1/2

(89)

(295)

1 1/4

(32)

36 7/8

(937)

40

GAL

60

GAL

G

CLERANCE INCLUDING

HANDLE & LATCH DEVICE

AGITATOR MOTOR DATA SPECIFICATIONS

MAXIMUM

MINIMUM

MAXIMUM

MINIMUM

KETTLE POWER ELECTRICAL TABLE

VOLTAGE PHASE

240 V

RPM MAIN

H.P.

1-1/2 150

LOAD

101 A

1 PH208 V

3 PH

59 A

1 PH

105 A

3 PH

61 A

3 PH

29 A480 V

RPM SECONDARY 240V 3PH

54

27

462 120

23

75

60

POWER

21 KW

24 KW

TABLE OF DIMENSIONS

MODEL

DIM.

INCH

29-1/2

B

42-1/4

C

40-3/8

D

15-1/4

E

21-1/2

F

G

63-1/2

H

57-1/2

J

29-1/2

K

14-1/4

L

12-1/2

M

ELEC. LOAD RATING

208V 3PH

5.3 A

3.1 A

6.9 A

4.0 A

ELECTRICAL
CONNECTION
FOR MIXERS
3/4" IPS

40 GAL.

26A

73

4.8 A

2.8 A

6.2 A

3.6 A

1025

1854

1613

1460

60 GAL.

MM

INCH

660

30MM762

749

31

787

44-1/8

879

387

546

749

362

318

44-1/8

13-1/4

23-1/2

81-1/2

68-3/4

61-1/2

31-1/2

12-3/8

16-1/2

927

1121

337

597

2070

1746

1562

800

314

419

480V 3PH

2.4 A

1.4 A

3.1 A

1.8 A

6 MIN
(152)

7-1/2" MAX.

(191)

3

H

F

2-3/16

(165)

26

(257)

6 (152)

M

MIN.
SIDE WALL
CLERANCE

KETTLE IN

TILTED POSITION

ADJUSTABLE FEET

L

1

K

MIN. POUR PATH

J

MAX. POUR PATH

D

1

ELECTRICAL CONNECTION

FOR KETTLE 1" IPS

47

(1194)

6-1/2
(165)

13 1/16

(332)

WALL

2

9-1/4
(235)

140906 REV. A

6 MIN (152)
REAR WALL
CLERANCE

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.