Groen BPP-30G User Manual

ECLIPSE BRAISING PANS

PROJECT NAME:

LOCATION:

ITEM NO:

POWER TILT GAS MODEL BPP-30G/40G

Braising pan shall be a Groen Eclipse™ Ergonomic Tilting Braising Pan Model BPP-30G or BPP-40G, gas
heated, power tilting 10” deep pan with 3” radiused corners, 5/8” thick stainless steel clad cooking surface on
open tubular leg stand. Specify 30 gallon model BPP-30G or 40 gallon model BPP-40G.

AVAILABLE MODELS:

BPP-30G (30 GALLON)
BPP-40G (40 GALLON)

CONSTRUCTION: The pan body shall be of type

304 stainless steel, solid one-piece welded heavy-duty
construction, with 10” pan depth. All exposed surfaces
shall be of stainless steel. The cooking surface is a
heavy 5/8” thick stainless steel clad plate with specially
designed welded heat transfer fins, heated by the gas
burner/combustion chamber. This combination delivers
more uniform heat transfer over the entire cooking
surface. The heavy plate prevents warping or distortion.
(See operator’s manual for proper warm up settings).
Controls and tilt mechanism are mounted in stainless
steel housings, on the pan body sides. Braising pan shall
come standard with a mounting bracket for either right-

side, left-side or rear faucet mounting. Etch marks in
both gallons and liters shall be included.

FINISH: Interior of braising pan shall be polished to

a 100 emery grit finish. Exterior of braising pan shall
be finished to a #3 finish, ensuring maximum ease in
cleaning and maintaining appearance.

C.S.A. DESIGN CERTIFICATION: Braising Pan

shall be design-certified by CSA International (formerly
AGA) for use with Natural Gas or LP Gas.

SANITATION AND NSF LISTING: Braising

pan shall be designed and constructed to be NSF- listed,
meeting all known health department and sanitation
codes. True round leg tubular stand design and 3” radius
pan interiors make cleaning easier.

POWER TILT: The braising pan shall have a

smooth-action quick-tilting body with motorized crank
tilt mechanism, which provides precise control during
pouring of pan contents for easy operation. A powerful
reversing DC motor is activated by a 3-position control

switch. Unit shall have an easy access, manual
override capability to tilt the pan in case of power
failure. Pan body shall tilt past vertical to assist in
cleaning.

VENTED COVER: A heavy-gauge fully

adjustable one-piece cover is standard with torsion
bar type counterbalance designed to maintain the
selected cover position. A vent is provided in the
cover top to regulate condensate buildup and a rear
condensate drip shield is located under the cover
to prevent condensate from dripping on floor when
cover is opened.

CONTROLS: Operating controls include console-

mounted ON power switch, ON power indicator light,
HEAT indicator light, temperature control and motor
tilt switch.

PERFORMANCE FEATURES: Braising pan

shall be equipped with controls that allow operation
at 7 degree angle to facilitate griddling. Braising pan
shall be thermostatically-controlled for automatic
shut- off when desired temperature is reached and
automatic power ON when temperature falls below
desired setting. Model BPP-30G has a firing rate of
104,000 BTU/hr. Model BPP-40G has a firing rate of
144,000 BTU/hr. Electronic intermittent pilot ignition
system is standard. Braising pans have a high limit
thermostat as a safety feature.

INSTALLATION: Unit requires 1/2” NPT gas

connection. Requires one 115 Volt, single-phase, 60
HZ, 5 AMP supply.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

QTY:

MODEL NO:

AIA NO:

SIS NO:

Narrow width, stainless steel, power
tilting, braising pan, round leg, gas­heated, 30- and 40-gallon capacity.
(Model BPP-40G shown)

OPTIONS/ACCESSORIES:

Single pantry water fill faucet
Double pantry water fill faucet
Steamer pan carrier
2” tangent drawoff valve

(option: must be ordered with

unit)
Gas quick disconnect
Flanged feet
Strainer for tangent draw-off

valve
Pouring lip strainer
Steamer pan inserts
Single or double pantry faucet

with spray hose assembly (48”

or 60”)
Casters

Braising Pans

146765 RevK

Revised 06/15

P/N 146527 REV F

BPP-30G/40G

888-994-7636, unifiedbrands.net

© 2015 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.