Grizzly G0871 Instructions Manual

MODEL G0871

ROLLER STAND FOR G0869

BENCHTOP TABLE SAW

INSTRUCTIONS

For questions or help with this product contact Tech Support at [phone] or [e-mail]

Introduction

Model G0871 Roller Stand allows you to quickly
and easily mount your Model G0869 Benchtop
Table Saw onto a stable, yet portable work sur­face. To mount Model G0869 to this stand, follow
the instructions below.

Note: This Roller Stand is designed only for use
with the Model G0869 Benchtop Table Saw or as
a replacement for the stand that comes with Model
G0870 Portable Table Saw. Do not attempt to use
Model G0871 as a stand for any other machine.

Inventory (Figure 1)

Description Qty

A. Roller Stand (Not Shown) ........................... 1

B. Left & Right Handles (Not Shown) .......1 Ea.

C. Carriage Bolts M8-1.25 x 40 ....................... 4

D. Button Head Cap Screws M8-1.25 x 16 ..... 2

E. Hex Wrench 5mm ....................................... 1

F. Flat Wrench 10mm/13mm .......................... 1

G. Wheels ....................................................... 2

H. Lock Nuts M8-1.25 ................................... 10

I. Button Head Cap Screws M8-1.25 x 40 ..... 4

J. Flat Washers 8mm ..................................... 6

Assembly

1. Attach each wheel to axle with (1) 8mm

flat washer and (1) M8-1.25 lock nut (see

Figure 2).

2. Attach left handle to stand body with (2)

M8-1.25 x 16 button head cap screws (see

Figure 2).

3. Attach right handle to stand body with (4)

M8-1.25 x 40 button head cap screws and
(4) M8-1.25 lock nuts (see Figure 2).

Left Handle Right Handle

x 2

C

I J

H

Figure 1. Model G0871 inventory.

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

D

COPYRIGHT © FEBRUARY, 2019 BY GRIZZLY INDUSTRIAL, INC.

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

(FOR MODELS MFD. SINCE 01/19) #WK20229 PRINTED IN TAIWAN

E

x 4

Figure 2. Model G0871 assembly.

F

G

V1.0 2 .19

Mounting Table Saw to Stand

1. Push leg lock buttons in and unfold legs until

lock buttons click into place in holes shown in
Figure 3.

Leg Lock Button

(1 of 4)

Leg (1 of 4)

Figure 3. Location of stand legs, leg lock

buttons, and leg lock holes.

Hole

(1 of 4)

2. Place table saw unit on stand. Secure with
(4) M8-1.25 x 40 carriage bolts, (4) 8mm
flat washers, and (4) M8-1.25 lock nuts (see
Figure 4).

Note: Table saw mounts to stand facing

either direction—with stand wheels oriented
to the left or to the right.

x 4

Figure 4. Model G0869 mounted on Model

G0871 Roller Stand.