Greenlee Combination Drill Catalog Page

= NEw PrODUCT

= rEPLACEmENT PArT = ACCESSOry

Combination Drill/Tap Bits

B

= BArE TOOL

• Complete hole drilling, tapping and deburring/countersinking in one
operation with power drill saves labor and time.

• Back tapered beyond tap to prevent thread damage from over-drilling.

• Deburr/countersink also provided on bit beyond back taper.

• Made from hardened high-speed steel vs. carbon steel for longer life.

• High quality hex shank to ensure strong connection to drill chuck.

• Designed to tap up to 10-gauge metal.

• Quick change adaptor included in both metric and standard kits.

SPECIFICATIONS

Material thickness Up to 10 gauge
Material type Mild steel, copper, brass, aluminum

Shank 1/4" quick change hex
Drill Material High-speed steel
Drill point Split point with web thinning

CAT. N O . UPC NO. DESCRIPTION DTAPKIT DTAPKITM

DTAPKITM

DTAPKIT

12151
17620

M3-M10 6 Piece Drill/Tap Set

6-32 to 1/4-20 6-piece Drill

Tap Se t

DTAPKITM

DTAP6-32 176 11 6-32NC Drill/Tap Bit

DTAP8-32 17612 8-32NC Drill/Tap Bit
DTAP10 -24 17613 10-24NC Drill/Tap Bit
DTAP10 -32 17614 10-32NF Drill/Tap Bit
DTA P 12-2 4 17615 12-24NC Drill/Tap Bit
DTAP1/4-20 17616 1/4-20NC Drill/ Tap Bit
DTAP5 /16 -18 11627 5/16-18NC Drill/Tap Bit
DTAP3 /8-16 116 28 3/8-16NC Drill/Tap Bit
DTAPM3 C 12160 M3 X .50 Drill/Tap Bit
DTAPM4C 12161 M4 X .70 Drill/Tap Bit
DTAPM5C 12162 M5 X .80 Drill/Tap Bit
DTAPM6C 12163 M6 X 1.00 Drill/Tap Bit
DTAPM8C 1216 4 M8 X 1.25 Drill/Tap Bit
DTAPM10C 12165 M10 X 1.50 Drill/ Tap Bit

✓

✓
✓
✓
✓
✓

✓
✓
✓

✓

✓

✓

NOTE: TO EXTEND THE LIFE OF YOUR TOOL, SEE CUTTING/THREADING OIL ON PAGE 139.

PHONE [phone] PHONE [phone] PHONE [phone]

USA CANADA INT’L

FAX [phone] FAX [phone] FAX [phone]

www.greenlee.com

103