Grandstream Networks GWN7630 User Manual
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
GWN7630
Enterprise 802.11ac Wave-2 4x4:4
Wi-Fi Access Point
For Warranty and RMA information, please visit www.grandstream.com
Quick Installation Guide
OVERVIEW
EN
The GWN7630 is a high-performance 802.11ac wireless access point
for small to medium sized businesses, multiple floor offices, commercial
loca-tions and branch offices. It offers dual-band 4x4:4 MU-MIMO
technology(beamforming is not supported) and a sophisticated antenna
design for maximum network throughput and expanded Wi-Fi coverage
range. To ensure easy installation and management, GWN7630
uses a controllerless distributed network management design where
the controller is embedded within the product’s web user interface. For
the sake of large-scale deployment, GWN7630 supports to be
managed by GWN Cloud system. With support for fast
roaming, advanced QoS, low-latency real-time applications, 200+
client devices per AP and dual Gigabit network ports with PoE/PoE+,
combin-ing with the features of Mesh, Captive Portal and seamless
connection with Grandstream WP8XX series Wi-Fi phone, the
GWN7630 is an ideal wireless access point for large and small
wireless network deployments.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this
60 °C for storage and 0 °C to 40 °C for operating.
• Do not expose the device to environments outside of the following
humidity range: 10-90% RH (non-condensing).
• Do not use the device in outdoor environment.
• Do not power cycle your device during system boot up or firmware
upgrade. You may corrupt firmware images and cause the unit to
malfunction.
device to temperatures outside range of -10 °C to
PACKAGE CONTENTS
3x M3 NUT
GWN7630 POR
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps)
NET Ethernet RJ45 port (10/100/1000Mbps)
RESET Factory reset button.
1 x Quick Installation Guide
1 x GPL Statement
TS
supporting PoE/PoE+.
to your router or another GWN76xx.
Press for
fault settings.
7 seconds to reset factory de-
POWERING AND CONNECTING THE GWN7630
GWN7630 can be powered on using PoE/PoE+ switch using following
steps:
1x GWN7630
Access Point
3x Screw
(PM 3 x 50)
1x Mounting
Bracket
3x Screw
(PA 3.5 x 20)
~1~
1x Ceiling
Mounting Bracket
3x Plastic Expansion
Bolt
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7630.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch
~2~
Loading...