GP Batteries WM2A User guide

PD Charger

WM2A

Instruction Manual

Read the instruction manual thoroughly before use.
Keep the manual for future reference.

Using your product

1. Attach the appropriate power plug to the charger by sliding
the plug onto the pins until you hear a “click” sound.
(See gures below)

* Ensure to slide the top pin of the UK plug into its extended

position before plugging the charger into a power outlet.

2. Plug the charger into a power outlet.

3. Connect your devices to the USB ports with the certied cable.
The charger can charge up to 2 devices at the same time.

USB-C

USB-A

Specifications

Input : AC 100-240V, 50/60Hz, 0.5A Max.
Output : Single port charging
USB-C – DC 5V/3A, 9V/2.22A, 12V/1.5A, 20W Max.
USB-A – DC 5V/3A, 9V/2A, 12V/1.5A, 18W Max.
Simultaneous charging
USB-C+USB-A – DC 5V/3.1A, 15.5W Max.
Total Output : 20W Max.
Dimensions* : 44 (L) x 42 (W) x 31 (H) mm
Weight* : 50g

*Excluding plugs

Safety information

Please read below safety notes carefully before use to avoid any
personal injury and property damage caused by improper use of the
product. Any warranty claims or returns caused by misuses will not
be accepted.

• Keep the product away from children and inrm persons.

• Keep the product away from heat sources, combustible gas,
humidity and liquids.

• Do not operate a wet or otherwise damaged product.

• Operating temperature should be between 0°C to 30°C.

• Be careful not to crash the product while it is plugged in to avoid
damage.

• Do not attempt to repair, disassemble or destroy the product in
any way.

• Keep the product away from metallic or conductive objects to
avoid short-circuit.

• Dispose the product as per local law and regulations.