
Charge:65mA x 16hrs at 20°C
: Rechargeable Nickel Metal
Hydride Cylindrical Cell
Model No.: GP65AAAHCE
Rechargeable Nickel Metal Hydride
content
Battery Made with Minimum 10%
Recycled materials
Φ= 10.5mm
(with Sleeve)
H = 44.5mm
Recommended discharge current
65 to 1950mA
: 1.2V
Rated: 650mAh
Typical: 670mAh
When discharged at 130mA to
1.0V at 20℃
: 65mA for 16 hrs at 20℃
70% of rated capacity after cell storage
at 20 for 12 months, ℃
at 130mA to 1.0V at 20℃
325mA to 650mA (0.5 to 1C)
charge termination control
recommended control parameters:
-△V
: 0-5mV
DT/dt : 0.8℃/min (0.5 to 0.9C)
Overcharge
Range
0.8 - 1℃/min (1C)
TCO : 45 - 50℃
Timer : 105% nominal input
(for ref. only)
: > 1000 cycles (IEC standard)
: 65mA maximum current for 1 year.
No conspicuous deformation and/or
leakage
: 12.5g
Average 45mΩ upon fully charged
(Max. 65mΩ) at 1000Hz
: 1.5V at 65mA charging
: Standard Charge : 0 to 45℃
Fast Charging : 10 to 45℃
Low Rate Discharge
1.5
1.4
1.3
1.2
1.1
1
Voltage (V)
0.9
0.8
0.7
325mA
0 2 4 6 8 10 12 14
Discharge : -20 to 50℃
Storage : -20 to 35℃
Fast Charge (Charge Control Required)
1.7
1.6
1.5
1.4
1.3
Voltage (V)
1.2
1.1
650mA
(1C)
325mA
(0.5C)
0 20 40 60 80 100 120 140 160
Capacity Input %
High Rate Discharge
1.5
1.4
1.3
1.2
1.1
1
Voltage (V)
0.9
0.8
0.7
The information (subject to change without prior notice) contained in this
document is for reference only and should not be used as a basis for product
guarantee or warranty. For applications other than those described here, please
consult your nearest GP Sales and Marketing Office or Distributors.
1950mA
(3C)
0 10 20 30 40 50 60 70
Discharge Time (Mins)
www.gpbatteries.com
Manufacturer reserves the right to alter or amend the design, model and specification without prior notice.
Copyright@GPI International Ltd. – All rights reserved
130mA
Discharge Time (Hrs)
1300mA
(2C)
650mA
65mA
(1C)
TRS1136 rev.00