Gossen Mavolux 5032CB User Manual

Operating Instructions
MAVOLUX 5032C/B USB
Illuminance Meter 15458 1/03/12
Circular orifice
Light collector
Photometer head
USB Port
Display
Key pad
Back of display unit:
- battery door
- serial number
- calibration seal for DAkkS- or calibration certificate (if available)
Back of photometer head:
- serial number of display unit
- tripod socket ¼ “
Perspective view of MAVOLUX USB
Contents Page Page
1 Applications..............................................4 5 USB Port – Standard Software.. 12
2 Display..................................................... 5 6 Accessories...................................... 13
2.1 Description of Display Elements.............. 5 6.1 Standard Equipment.......................... 13
2.2 Key Pad................................................... 5 6.2 Optional Accessories......................... 13
6.3 Calibration Certificate........................ 14
3 Functioning of the MAVOLUX.............. 6 6.4 DAkkS Certificate………………… 14
3.1 Preparation............................................. 6
3.2 Duration of Display – 7 Service and Maintenance….……. 14
Continuous Operation................................6
4 MAVOLUX Operation............................. 7 8 Specifications................................. 14
4.1 Switch On – Make Measurement...... 7
4.2 Selecting the Measuring Unit –
lx or fc – cd/m2 or fL........................... 7 Declaration of Conformity............ 18
4.3 Overload Display – Zero Point Indication 7
4.4 Memory Functions.................................... 8
4.4.1 „HOLD“ Display Hold Function................. 8
4.4.2 „Mem“ – Save Measured Values
4.4.3 „Mem Edit“ – Overwrite a Saved
Measured Value................................ 10
4.4.4 „Mem Recall“ - Data Memory Recall... 11
4.4.5 „Mem Clear“ - Clear Memory...................12
GOSSEN Foto- und Lichtmesstechnik GmbH 3
in Memory........................................... 9
1 Applications
The MAVOLUX 5032 illuminance meters are handy, easy to use and high precision measuring instruments. They allow the accurate measurement of the illuminance in the unit lx or fc. Combined with the Luminance Attachment, available as optional accessory, the MAVOLUX 5032 can also be used for measuring luminance in the unit cd/m² or fL. The light sensor is color corrected, i.e. its relative spectral responsivity has been adapted to that of the human eye V(). All the important types of light can be measured with high precision, without the necessity to apply any additional correction factors. The accuracy of that V() adaptation is the main difference between the two types MAVOLUX 5032 C and MAVOLUX 5032 B. The quality classes for illuminance meters have been defined in the Standard Specifications DIN 5032, Part 7. Consequently, the MAVOLUX 5032 C complies with Class C, MAVOLUX 5032 B complies with Class B (DIN 5032, part 7 and 8). The light collector with circular orifice in the photometer head has integrated cosine correction, so that oblique incident light will be measured accurately. Both MAVOLUX types allow measuring very high intensity light (daylight, headlights) without additional accessories. Especially the MAVOLUX 5032 B having an initial sensitivity of 0.01 lx is ideally suited for measuring extremely low light intensities, such as emergency lighting. The instruments are provided with a measuring value memory with 100 data spaces, which can be read and processed directly by the keys and the display but also through the integrated USB Port and the Standard Software supplied with the meters.
lx = Lux 1 lx = 0.0929 fc fc = footcandle 1 fc = 10,76 lx cd/m² = Candela per square meter 1 cd/m2 = 0,2919 fL fL = footlambert 1 fL = 3,426 cd/m
2
2 Display
* MAVOLUX 5032 B USB with automatic backlight in HOLD function
2.1 Description of Display Elements 2.2 Key Pad
1 Display of measuring value and Memory 1 Switch On/Off 2 Measuring Unit 2 Range key – Memory/Measuring range 3 Display „HOLD„ indication / Buffer Storage 3 lx/fc – Select measuring unit 4 Multiplying factor for measuring value 4 HOLD – Function / Buffer Storage 5 Auto ranging – automatic range selection 5 Range key – Memory/Measuring range 6 Low Battery 6 MEM – Memory key
GOSSEN Foto- und Lichtmesstechnik GmbH 5
3 Functioning of the MAVOLUX
3.1 Preparation
First remove the snap-on cover of the battery compartment at the back of the meter. Insert the battery included in the delivery contents (1.5 V size AA, IEC LR6) in the battery compartment. Care should be taken to place the battery correctly according to the polarity indications “+“ and “-“ in the battery compartment. When the battery warning symbol ( ) appears in the display, the battery must be replaced. The values in the measuring data memory and also the preset individual values will be maintained, even when the battery is changed.
3.2 Duration of Display Continuous Operation If for approx. 4 minutes none of the keys of the MAVOLUX is pressed down, the instrument will be turned off automatically. When the instrument is switched off, the values stored in the measuring data memory and also the preset individual values will be maintained. You can override the automatic switch-off, when you switch on the instrument and simultaneously keep the HOLD key pressed down. The measuring unit „lx / fc“ in the display will blink and indicate that the Continuous Operation Mode is on.
4 MAVOLUX Operation
4.1 Switch On – Make Measurement
Press down the on/off key and the MAVOLUX will start up in measuring mode and will immediately be measuring at 2 times per second. The instrument is in the function „AUTO“, i.e. the MAVOLUX will select the best suited measuring range for the existing light level. By pressing one of the range keys, one of the measuring ranges can be set. Scrolling up or down through additional measuring ranges is accomplished by briefly pressing one of the range keys. If both keys are pressed and held simultaneously, the instrument is returned to „AUTO RANGING“.
4.2 Selecting the Measurement Unit lx or fc – cd/m² or fL
Use the key lx/fc to select the required unit for the read-out – lux or footcandle. With the additional Luminance Attachment (please refer to 6.2 – Optional accessories), this key also selects the measurement unit for luminance cd/m² or fL – candela per square meter or footlambert.
4.3 Overload Display – Zero Point Indication
When exceeding one of the measuring ranges „OL“ (Overload) appears in the display.
The zero point indication may be achieved by putting the protective cap over the light collector of the photometer head.
GOSSEN Foto- und Lichtmesstechnik GmbH 7
4.4 Memory Functions
Hold
In addition to the display buffer storage, the MAVOLUX has also been provided with a memory space for up to 100 measured values. This function allows the user to make several measurements in the field and then to view them later. The data stored in the memory will be maintained, even if the meter is turned off or if the battery is changed.
4.4.1 „HOLD“ - Display Hold Function
The MAVOLUX has been equipped with a Display HOLD Function in order to enable you to make measurements in very low light conditions and to read them out later in brighter light conditions. The latest measurement will be buffer-stored in the display by striking the HOLD key. Then “HOLD” will appear in the display. Pressing down the HOLD key again will prompt the MAVOLUX to return to the measuring function.
The function HOLD is the basic function for all the memory functions.
4.4.2 „Mem“ – Save Measured Values in Memory
Hold
Mem
GOSSEN Foto- und Lichtmesstechnik GmbH 9
The measurement measured value which is to be saved will be maintained by the Hold key in the display and may be filed onto the next free memory space by pressing down key Mem. Then, for a few seconds, the display shows the saved measured value alternating with the number of the memory space. After that, the MAVOLUX returns into the measuring mode. If the memory space is filled with all 100 memory spaces, then the display will show “FLL”.
Hold
Mem
4.4.3 „Mem-Edit“ – Overwrite a Saved Measured Value
10 GOSSEN Foto- und Lichtmesstechnik GmbH
The MAVOLUX offers the function „Mem Edit“ for correcting a stored value in the memory. Measure again, press the Hold key and the new value is logged in. Then, by pressing one of the range keys, you can scroll through the memory.
At the memory space to be corrected press down the key Mem. Then the display shows the saved value for a few seconds alternating with the number of the memory space. Subsequently the MAVOLUX will return to measuring mode.
4.4.4 „Mem Recall“ – Data Memory Recall
Mem
GOSSEN Foto- und Lichtmesstechnik GmbH 11
Start in the function „Measuring“ and press down the key Mem. The last memory space filled will be displayed first.
Strike one of the Range keys to scroll through the data memory. The current memory space is displayed as 01-02..., alternating with the measured value saved in the memory.
To return to the measuring mode just press down any one of the other keys or if for about ten seconds no further memory data is recalled by the Range keys, the MAVOLUX will return to the measuring mode.
4.4.5 Mem-Clear“ – Clear Memory The MAVOLUX must be in function „HOLD“. Pressing down the Range keys simultaneously, will clear the complete measuring data memory. The cancelling is confirmed in the display by three dashes.
5 USB Port Standard Software The MAVOLUX is equipped with a USB Port which allows the meter to be connected to a PC by the USB cable (in the delivery contents). The CD Rom supplied with the MAVOLUX contains, among other information, a standard software which permits the immediate start of the operation by PC. More details about the PC operational functions are also available on that CD-Rom. With the standard software gLux the memory can be read and MAVOLUX can be controlled (automatic measurements from 2 times per second up to 1 time per day). The values can be presented as a chart or as graphics and be transferred to customer specific calculations.
12 GOSSEN Foto- und Lichtmesstechnik GmbH
6 Accessories
6.1 Standard Equipment
- Aluminium Case
- Battery
- Protective cover cap
- Standard Software on CD-ROM
- USB cable
- Instruction Manual
6.2 Optional Accessories
- Luminance Attachment cd/m² and fL (Order Code M516G) Measures the reflected light, i.e. the luminance of a surface with a measuring angle
 1/
approx. 15°. By a micro switch the MAVOLUX automatically detects the luminance
10
attachment screwed onto the light measuring probe. The measured luminance value is displayed correctly in value and unit. Please keep in mind that the luminance attachment is adapted to the light collector of 10 mm , older luminance attachments can not be used! The luminance attachment can not be used for classified luminance measurements!
- Adapter disc for Luminance attachment (Order Code M499G) The adapter disk may easily be plugged onto the luminance attachment.
* For all kinds of screens the light of the room will be shielded. The measuring results
will be more precise if you use the adapter disc.
* On sensitive surfaces the contact pressure is reduced by the big surface of the adapter disc. Therefore, the risk of damage during the measurement will be reduced considerably.
GOSSEN Foto- und Lichtmesstechnik GmbH 13
6.2 Calibration Certificate (Optional)
The traceability of the measuring results is guranteed by our calibration reference: Scientific Standard Lamps, type Wi 41G of the PTB (Physikalisch Technische Bundesanstalt Braunschweig – National Standard Institute of Germany). Depending on how the instrument is being used we recommend a recalibration interval between 12 and 24 month. For this purpose please contact our Calibration Service Department (telephone +49 911 8602 172).
6.4 DAkks Certificate (Optional)
With our calibration laboratory accredited according to ISO/IEC/EN 17025 for illuminance (registration number D-K-15080-01-00) of DAkkS we can offer you the highest industrial level for the performance and traceability of calibrations for light metering.
7 Service and Maintenance
No special maintenance is required, if the MAVOLUX is being handled correctly. Keep the outside surfaces clean. Use a slightly dampened cloth for cleaning. Do not use cleansers, abrasives or solvents. Should the instrument nevertheless not work to your satisfaction or if you will require repeated calibration with calibration or DAkkS certificate, please send the MAVOLUX to:
GOSSEN Foto- und Lichtmesstechnik GmbH Lina-Ammon-Str.22 D – 90471 Nürnberg
14 GOSSEN Foto- und Lichtmesstechnik GmbH
8 Specifications Light Sensor Silicon photo diode with V () filter Classification MAVOLUX 5032 USB – Class C according to DIN 5032, Part 7 (CIE 69)
MAVOLUX 5032 USB – Class B according to DIN 5032, Part 7 (CIE 69)
Measuring Rate 2 measurements per second LCD display 50 mm x 25 mm, (MAVOLUX 5032 B USB: back lighted display)
Read-out 7 segments, 31/2 digits, 13 mm Overload signal „OL“ in the display
Memory 100 memory space (measured values), display indication „FLL“ = memory full Interface USB 1.1 Port Power Supply
Battery one 1.5 V AA alkaline manganese cell Size AA (IEC LR 6) or suitable rechargeable battery Battery life approx. 45 hour continuous operation with alkaline manganese battery Battery test Automatic display of „ „ symbol, when battery voltage drops below 1.0 Volt External When the MAVOLUX is connected to a PC, power will be supplied by the PC via the USB cable.
GOSSEN Foto- und Lichtmesstechnik GmbH 15
Weights and Dimensions
Housing Plastics Dimensions Display Unit: 65 x 120 x 19 mm
Photometer Head: 31 x 105 x 30 mm
1.22 x 4.13 x 1.18” tripod socket ¼ “ on bottom side
Weight Display unit and photometer head approx. 200 g without battery Light sensor Light sensitive surface of the diffuser: approx. 10 mm with circular orifice.
Location of the reference plane is on the surface of the light collector.
Cable length Approx. 1.5 m. Available on special order available 3 m, 5 m and 10 m.
Electromagnetic Compatibility EMC
The MAVOLUX meets the German specifications 89/336/EWG 01.01.1996
16 GOSSEN Foto- und Lichtmesstechnik GmbH
2.56 x 4.73 x 0.75“ (without carrying case)
Characteristics MAVOLUX 5032 B USB
Measuring Quantity
Measuring Range
Measuring Range
Resolution
Resolution
in Lux (lx)
in footcandle (fc)
in lx
in fc
Illumination I 0.01... 19.99
0.001... 1 999
0.01
0.001
II
0.1... 199.9
0.01... 19.99
0.1
0.01
III
1... 1 999
0.1... 199.9
1
0.1
IV
10... 19 900
1... 1 999
10
1
V
100... 199 000
10... 19 990
100
10
in Candela/m² (cd/m²)
in footlambert (fL)
in cd/m²
in fL
Luminance I 0.1... 199.9
0.01... 19.99
0.1
0.01
with luminance
II
1... 1 999
0.1... 199.9
1
0.1
attachment
III
10... 19 990
1... 1 999
10
1
for cd/m² or fL
IV
100... 199 900
10... 19 990
100
10
V
1000... 1 999 000
100... 199 900
1000
100
Characteristics
Admissible Error according to
DIN 5032 Class B
Typical Error
MAVOLUX 5032 B USB
V()-Adaptation (f1)
6%
3.0%
True Cosine Evaluation (f2)
3%
2.0%
Linearity (f3)
2%
1.0%
Adjustment Error (f11)
1%
0.8%
Overall Error (f
ges
)
10%
~ 8.0%
Most Important Error Limits MAVOLUX 5032 B USB
GOSSEN Foto- und Lichtmesstechnik GmbH 17
V()-Adaptation (f1´ ) MAVOLUX 5032B USB
f
1
´ < 3 %
18 GOSSEN Foto- und Lichtmesstechnik GmbH
EG – KONFORMITÄTSERKLÄRUNG
Nr. / No.
Richtlinie
Directive
73/23/EWG 73/23/EEC
Elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen
- Niederspannungsrichtlinie –Anbringung der CE-Kennzeichnung : 2003
Electrical equipment for use within certain voltage limits
- Low Voltage Directive ­Attachment of CE mark : 2003
EN/Norm/Standard
IEC/Deutsche Norm
VDE-Klassifikation/Classification
EN 61010-1 : 1993 EN 61557-3 : 1997
IEC 61010-1 : 1992 IEC 61557-3 : 1997
VDE 0411-1 : 1994 VDE 0413-3 : 1997
Nr. / No.
Richtlinie
Directive
89/336/EWG 89/336/EEC
Elektromagnetische Verträglichkeit
- EMV - Richtlinie
Electromagnetic compatibility
-EMC directive
DECLARATION OF CONFORMITY
Dokument-Nr./ Document.No.: 102/2004
Hersteller/ Manufacturer: GOSSEN Foto- und Lichtmesstechnik GmbH Anschrift / Address: Thomas-Mann-Str.16-20
90471 Nürnberg Produktbezeichnung/ Product name: Beleuchtungsstärkemessgerät / Luxmeter / Footcandle meter
Typ / Type: MAVOLUX 5032 B USB Bestell-Nr / Order No: M503G
Das bezeichnete Produkt stimmt mit den Vorschriften folgender Europäischer Richtlinien überein, nachgewiesen durch die vollständige Einhaltung folgender Normen: The above mentioned product has been manufactured according to the regulations of the following European directives proven through complete compliance with the following standards:
Fachgrundform / Generic Standard: EN 61326 : 2002
Nürnberg, den 24. Juni 2004 ___________________________________________________ _____________________________________ Ort, Datum / Place, date: Vorsitzender der Geschäftsführung
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, This declaration certifies compliance with the above mentioned beinhaltet jedoch keine Zusicherung von Eigenschaften. Die Sicherheitshinweise directives but does not include a property assurance. The safety der mitgelieferten Produktdokumentationen sind zu beachten. notes given in the product documentations which are part of the supply, must be observed.
GOSSEN Foto- und Lichtmesstechnik GmbH 19
Measuring Quantity
Measuring Range
Measuring Range
Resolution
Resolution
in Lux (lx)
in footcandle (fc)
in lx
in fc
Illumination I 0.1... 199.9
0.01... 19.99
0.1
0.01
II
1... 1 999
0.1... 199.9
1
0.1
III
10... 19 900
1... 1 999
10
1
IV
100... 199 000
10... 19 990
100
10
in Candela/m² (cd/m²)
in footlambert (fL)
in cd/m²
in fL
Luminance I 1... 1 999
0.1... 199.9
1
0.1
with luminance
II
10... 19 990
1... 1 999
10
1
attachment
III
100... 199 900
10... 19 990
100
10
for cd/m² or fL
IV
1000... 1 999 000
100... 199 900
1000
100
Characteristics
Admissible Error according to
DIN 5032 Klasse C
Typical Error
MAVOLUX 5032 C USB
V()-Adaptation (f1)
9%
7.5%
True Cosine Evaluation (f2)
6%
2.0%
Linearity (f3)
5%
1.5%
Adjustment Error (f11)
2%
1.0%
Overall Error (f
ges
)
20%
~ 15.0%
Characteristics MAVOLUX 5032 C USB
Most Important Error Limits MAVOLUX 5032 C USB
20 GOSSEN Foto- und Lichtmesstechnik GmbH
V()-Adaptation (f1´ ) MAVOLUX 5032C USB
f
1
´ < 7,5 %
GOSSEN Foto- und Lichtmesstechnik GmbH 21
EG - KONFORMITÄTSERKLÄRUNG
Nr. / No.
Richtlinie
Directive
73/23/EWG 73/23/EEC
Elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen
- Niederspannungsrichtlinie –Anbringung der CE-Kennzeichnung : 2003
Electrical equipment for use within certain voltage limits
- Low Voltage Directive ­Attachment of CE mark : 2003
EN/Norm/Standard
IEC/Deutsche Norm
VDE-Klassifikation/Classification
EN 61010-1 : 1993 EN 61557-3 : 1997
IEC 61010-1 : 1992 IEC 61557-3 : 1997
VDE 0411-1 : 1994 VDE 0413-3 : 1997
Nr. / No.
Richtlinie
Directive
89/336/EWG 89/336/EEC
Elektromagnetische Verträglichkeit
- EMV - Richtlinie
Electromagnetic compatibility
-EMC directive
DECLARATION OF CONFORMITY
Dokument-Nr./ Document.No.: 101/2004
Hersteller/ Manufacturer: GOSSEN Foto- und Lichtmesstechnik GmbH Anschrift / Address: Thomas-Mann-Str.16-20
90471 Nürnberg Produktbezeichnung/ Product name: Beleuchtungsstärkemessgerät / Luxmeter / Footcandle meter
Typ / Type: MAVOLUX 5032 C USB Bestell-Nr / Order No: M502G
Das bezeichnete Produkt stimmt mit den Vorschriften folgender Europäischer Richtlinien überein, nachgewiesen durch die vollständige Einhaltung folgender Normen: The above mentioned product has been manufactured according to the regulations of the following European directives proven through complete compliance with the following standards:
Fachgrundform / Generic Standard: EN 61326 : 2002
Nürnberg, den 24. Juni 2004 ___________________________________________________ _____________________________________ Ort, Datum / Place, date: Vorsitzender der Geschäftsführung
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten Richtlinien, This declaration certifies compliance with the above mentioned beinhaltet jedoch keine Zusicherung von Eigenschaften. Die Sicherheitshinweise directives but does not include a property assurance. The safety der mitgelieferten Produktdokumentationen sind zu beachten. notes given in the product documentations which are part of the supply,
22 GOSSEN Foto- und Lichtmesstechnik GmbH
must be observed.
GOSSEN Foto- und Lichtmesstechnik GmbH is also a leading provider of further interesting light measuring instruments:
- MAVO-MONITOR USB: High quality and precision instrument for measuring luminance, classified according to the Standard Specifications DIN 5032, Part 7, Class B and CIE 69. The measuring sensor to be placed directly on the luminous or back lighted surface may be used for contact measurement such as i.e. monitors, TV screens, light boxes, light panels, illuminated advertising boards, traffic sign etc.
- MAVO-SPOT 2 USB: For precision spot metering of the luminance with a measuring angle of 1 degree under consideration of the ambient light. The sensitive light sensor is colour corrected, i.e. its spectral sensitivity is adapted to the spectral brightness sensitivity of the human eye V() according to DIN 5032, Part 7, Class B. The MAVO- SPOT 2 USB is especially suited for inspecting and constancy testing of viewing monitors in medical applications according to DIN 6868/57. Other applications are projection screens, street surfaces and street lightings, illumination of tunnels and sport areas.
- MAVO-MAX: For monitoring the ambient light in the surroundings of monitors according to IEC 61223-2-5 (QS-RL dt. 20/11/2003). The use of the MAVO-MAX permits the prolongation of the required repeat test intervals of the “veil luminance“ and the “maximum contrast“ at medical imaging displays to six months.
GOSSEN Foto- und Lichtmesstechnik GmbH 23
Printed in Germany – Subject to change without notice
GOSSEN Foto- und Lichtmesstechnik GmbH Lina-Ammon-Str.22 90471 Nürnberg Germany Phone +49 911 8602-181 Fax +49 911 8602-142 E-Mail info@gossen-photo.de www.gossen-photo.de
24 GOSSEN Foto- und Lichtmesstechnik GmbH
Loading...