Giles RT-5-HC Service Manual

Operations and Service Manual
FOODSERVICE EQUIPMENT
Giles Enterprises, Inc.
P.O. Box 210247 • 2750 Gunter Park Drive West • Montgomery, AL 36121-0247 USA (334) 272-1457 • Service Hotline 1-800-554-4537 (USA & Canada Only) • FAX (334) 272-3561
Form No. 65969 (1/98)
Models RT-5-HC
RT -5-HC
GHC-5
b
Safety Precautions
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance!
Warning!!
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
POST IN A PROMINENT LOCATION
!
!
Table of Contents
I Introduction...................................................................................................................... 2
1 Installation Instructions
1 - 1 Installation Instructions...................................................................................................... 3
1 - 2 Uncrating the Holding Cabinet.......................................................................................... 4
1 - 3 Electrical Requirements..................................................................................................... 4
2 Operating
2 - 1 Operating Procedure ......................................................................................................... 5
3 Holding Cabinet
3 - 1 Holding Cabinet Components and Their Function ............................................................ 6
3 - 2 Holding Cabinet Figure 1................................................................................................... 7
4 Shelf Assembly
4 - 1 Shelf Assembly Illustration................................................................................................ 9
5 Parts
5 - 1 Parts List............................................................................................................................ 10
5 - 2 Parts Ordering and Services Information..........................................................................11
6 Wiring
6 - 1 Wiring List.......................................................................................................................... 12
6 - 2 Wiring Diagram..................................................................................................................13
2
Introduction
Congratulations on the purchase of your new Giles Holding Cabinet. This unit is available as a free standing unit or for use with the Giles RT5 Rotisserie. With proper care and maintenance this unit could provide you with years of trouble-free service.
To help protect your investment in this cooking equipment, we recommend you take a few moments to familiarize yourself with the installation and maintenance procedures contained in this manual. Adherence to these recommended procedures minimizes the potential for costly “Down-Time” and equipment repairs.
Installation Instructions
3
1 - 1 Installation Instructions
This section provides a summary of the procedures necessary for proper installation of your Giles Holding Cabinet. To prevent personal injury or equipment damage, please ensure the following steps are taken:
For your safety DO NOT store or use gasoline or other flammable vapors and liquids in the vicin­ity of this or any other appliance!
1. When used with a rotisserie, keep the appliance 6" (15.2cm) from combustible materials on the front and 1" (2.54cm) from combustible materials on the sides.
2. When installed without a rotisserie, there is a zero clearance to combustibles.
3. Please note the wiring diagrams for this appliance are located at the rear of the Manual, Section 6.
4. Please ensure this appliance is electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI./NFPA. 70-1984.
5. Please provide adequate room for servicing and proper operation of this appliance. Also provide adequate ventilation in the operating area where necessary.
6. Always consult with an electrician or other qualified individuals prior to installation.
7 Ensure voltage and amperage supplied to the unit are as specified on the rating plate.
8. The power cord plug must be accessible after the appliance is installed.
9. If the cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, in order to avoid a hazard.
IMPORTANT NOTE
The only rotisserie approved for use with your RT-5-HC Holding Cabinet is the Giles RT5 Rotisserie.
DO NOT Modify, Alter or Add Attachments to This Equipment!
10.If wired for rotisserie, route wiring through 1 1/4" diameter tubing, on the top of the cabinet, to the junction box on the bottom of the cabinet. (wiring not included)
11.Attach power supply line to junction box.
12.Please retain this manual for future use.
The above steps should help to ensure safe and proper installation of your RT-5-HC/GHC-5 Holding Cabinet. If you have any questions concerning these procedures, contact your local Giles representa­tive or other qualified service person.
!
!
Loading...
+ 9 hidden pages