Gigabyte GA-6VX7-1394 Manual

Mar. 30, 2000

Signature:

Date:

ERIC LU

Eri c Lu

Representative Person's Name:

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including that may cause undesired operation.

Model Number:

GA-6VX7-1394

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC.

Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744

Phone/Fax No: [phone]/ [phone]

hereby declares that the product

Product Name: Mother Board

FCC Compliance Statement:

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected

-Consult the dealer or an experienced radio/television technician for additional suggestions

You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-6VX7-1394

is in conformity with

(reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive

EN 55011	Limits and methods of measurement	EN 61000-3-2*	Disturbances in supply systems caused
	of radio disturbance characteristics of	EN60555-2	by household appliances and similar
	industrial, scientific and medical (ISM		electrical equipment “Harmonics”
	high frequency equipment
EN55013	Limits and methods of measurement	EN61000-3-3*	Disturbances in supply systems caused
	of radio disturbance characteristics of	EN60555-3	by household appliances and similar
	broadcast receivers and associated		electrical equipment “Voltage fluctuations”
	equipment
EN 55014	Limits and methods of measurement	EN 50081-1	Generic emission standard Part 1:
	of radio disturbance characteristics of		Residual, commercial and light industry
	household electrical appliances,
	portable tools and similar electrical	EN 50082-1	Generic immunity standard Part 1:
	apparatus		Residual, commercial and light industry
EN 55015	Limits and methods of measurement	EN 55081-2	Generic emission standard Part 2:
	of radio disturbance characteristics of		Industrial environment
	fluorescent lamps and luminaries
EN 55020	Immunity from radio interference of	EN 55082-2	Generic immunity standard Part 2:
	broadcast receivers and associated		Industrial environment
	equipment
EN 55022	Limits and methods of measurement	ENV 55104	Immunity requirements for household
	of radio disturbance characteristics of		appliances tools and similar apparatus
	information technology equipment
DIN VDE 0855	Cabled distribution systems; Equipment	EN 50091- 2	EMC requirements for uninterruptible
part 10	for receiving and/or distribution from		power systems (UPS)
part 12	sound and television signals
CE marking		(EC conformity marking)

The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065	Safety requirements for mains operated	EN 60950
	electronic and related apparatus for
	household and similar general use
EN 60335	Safety of household and similar	EN 50091-1
	electrical appliances

Manufacturer/Importer

Safety for information technology equipment including electrical business equipment

General and Safety requirements for uninterruptible power systems (UPS)

Signature : Rex Lin

(Stamp)

Date: Mar.30, 2000

Name

:

Rex

Lin

6VX7-1394

Socket 370 Processor Motherboard

USER'S MANUAL

Socket 370 Processor Motherboard

REV. 3.1 First Edition

R-31-01-000711

How This Manual Is Organized

This manual is divided into the following sections:

1)	Revision History	Manual revision information
2)	Item Checklist	Product item list
3) Features		Product information & specification
4)	Hardware Setup	Instructions on setting up the motherboard
5)	Performance & Block Diagram	Product performance & block diagram
6) Suspend to RAM		Instructions STR installation
7)	BIOS Setup	Instructions on setting up the BIOS
		software
8)	Appendix	General reference

Table Of Content

Revision History	P.1
Item Checklist	P.2
Summary of Features	P.3
6VX7-1394 Motherboard Layout	P.5
Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition	P.6
Performance List	P.32
Block Diagram	P.33
Suspend to RAM Installation	P.34
Memory Installation	P.40
Page Index for BIOS Setup	P.41
Appendix	P.69

6VX7-1394 Motherboard

Revision History

Revision	Revision Note	Date
3.1	Initial release of the 6VX7-1394 motherboard user’s	Jul.2000
	manual.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.

Jul. 11, 2000 Taipei, Taiwan, R.O.C

1

Item Checklist

Item Checklist

þThe 6VX7-1394 motherboard

þCable for IDE / floppy device

þDiskettes or CD (TUCD) for motherboard driver & utility oInternal COM B Cable (Optional)

oInternal USB Cable (Optional) oCable for SCSI device

þ6VX7-1394 user’s manual

2

6VX7-1394 Motherboard

Summary Of Features

Form Factor	Ÿ	30.4 cm x 20.3 cm ATX SIZE form factor, 4 layers PCB.
CPU	Ÿ	Socket 370 processor
		Intel Pentiumâ!!! 100/133MHz FSB, FC-PGA
		Intel CeleronTM 66MHz FSB, FC-PGA/PPGA
	Ÿ 2nd cache in CPU(Depend on CPU)
	MPCB Ver.3.1 No Support PPGA Processor
Chipset	Ÿ	VT82C694X (VIA Apollo Pro 133A)
	Ÿ	VT82C686A
Clock Generator	Ÿ	ICS 9248DF-39
	Ÿ 66/100/133 MHz system bus speeds (PCI 33MHz)
	Ÿ 112/124/140/150 MHz system bus speeds
		(PCI 44MHz) (reserved)
Memory	Ÿ	3 168-pin DIMM sockets.
	Ÿ Supports PC-100 / PC-133 SDRAM and VCM SDRAM
	Ÿ Supports up to 1.5GB(Max)
	Ÿ Supports only 3.3V SDRAM DIMM
	Ÿ Supports 72bit ECC type DRAM integrity mode.
I/O Control	Ÿ	VT82C686A
Slots	Ÿ	1 AGP Slot Supports 4X mode & AGP 2.0 compliant
	Ÿ 5 PCI Slot Supports 33MHz & PCI 2.2 compliant
	Ÿ	1 ISA Slot
	Ÿ 1 AMR(Audio Modem Riser)Slot
On-Board IDE	Ÿ	2 IDE bus master (DMA 33/ ATA 66) IDE ports for up
		to 4 ATAPI devices
	Ÿ Supports PIO mode 3, 4 (UDMA33/ATA66) IDE &
		ATAPI CD-ROM
On-Board	Ÿ	1 floppy port supports 2 FDD with 360K, 720K,1.2M,
Peripherals		1.44M and 2.88M bytes
	Ÿ 1 parallel ports supports SPP/EPP/ECP mode
	Ÿ 2 serial ports (COM A & COM B)
	Ÿ	4 USB ports
	Ÿ 3 IEEE 1394 port(Internal IEEE1394 port is optional)
	Ÿ 1 IrDA connector for IR
		To be continued…

3

	Summary of Features
Hardware Monitor	Ÿ CPU / System fan revolution detect
	Ÿ CPU / System temperature detect
	Ÿ System voltage detect (Vcore,+3V,+5V,+12V)
	Ÿ CPU overheat shutdown detect
PS/2 Connector	Ÿ PS/2 keyboard interface and PS/2 mouse interface
BIOS	Ÿ Licensed AMI BIOS, 2M bit flash ROM
Additional Features	Ÿ Supports Wake-on-LAN (WOL)
	Ÿ Supports Internal / External modem wake up
	Ÿ Includes 3 fan power connectors
	Ÿ Poly fuse for keyboard over-current protection

4

6VX7-1394 Motherboard

6VX7-1394 Motherboard Layout

PS/2	JP9
JP16
	JP19
USB
	PGA 370
	CPU
SW2
J13	VT82C694X
J14

J15

6VX7-1394

AMR

CN4

AGP

TSB4IL

V03 PCI1

JP30 JP15

JP5

LED1

SW1

J11

BAT1

JP23

JP1

USB2

PCI2 J1

VT82C686A

J3

PCI3

JP2

TSBI2

LV23

PCI4

BZ1

J4

BIOS

J12

PCI5

JP22

ISA

J2

5

		6VX7-1394 Motherboard Layout
$					Page
	Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition
	CPU Speed Setup				P.7
	Connectors				P.17
	J13/J14/J15: I EEE 1394 Connector				P.17
	COM A / COM B / LPT Port				P.17
	USB Connector				P.18
	PS/2 Keyboard & PS/2 Mouse Connector				P.18
	JP16 (CPU Fan)				P.19
	JP15 (Power Fan)				P.19
	JP2 (System Fan)				P.20
	ATX Power				P.20
	USB 2 Connector				P.21
	IR Connector				P.21
	Floppy Port				P.22
	IDE 1(Primary)/ IDE 2(Secondary) Port				P.22
	J3 (Ring Power On)				P.23
	J1 (Wake on LAN)				P.23
	JP5 (STR LED Connector) & LDE 1 (DIMM LED)				P.24
	Front USB Port [Optional]				P.24
	J11 (SM BUS)				P.25
	CN4 : I EEE 1394 Connect (Optional)				P.25
	Panel and Jumper Definition				P.26
	J2 (2x11 Pins Jumper)				P.26
	JP1 (Clear CMOS Function) [Optional]				P.27
	JP11 (STR Enable)				P.27
	JP19 (Cyrix CPU Turbo Function) [Optional]				P.28
	JP9 (USB Device Wake up Selection)				P.28
	JP23 (Case Open)				P.29
	JP22 (BIOS Flash Write Protection)				P.29
	JP30 (Over Voltage CPU Speed up) [Optional]				P.30
	J12 (Front Panel Jumper) [Optional]				P.30
	BAT1 (Battery)				P.31

6

6VX7-1394 Motherboard

CPU Speed Setup

The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 500MHz – 1GHz and faster processor.

SW1:							O : ON, X: OFF
CPU	PCI CLK	1	2	3	4	5		6
Auto	33.3	X	X	X	X	O		O
66	33.3	O	O	X	X	X		X
75	37.5	O	O	O	X	X		X
83	41.6	O	O	X	O	X		X
100	33.3	O	X	X	X	X		X
112	37.3	O	X	O	X	X		X
124	31	X	X	X	O	X		X
133	33.3	X	X	X	X	X		X
140	35	X	X	O	O	X		X
150	37.5	X	X	O	X	X		X

M The CPU speed must match with the frequency RATIO. It will cause system hanging up if the frequency RATIO is higher than that of CPU.

SW2:					O : ON, X: OFF
FREQ. RATIO			DIP SWITCH
	1	2		3	4
X 3	O	X		O	O
X 3.5	X	X		O	O
X 4	O	O		X	O
X 4.5	X	O		X	O
X 5	O	X		X	O
X 5.5	X	X		X	O
X 6	O	O		O	X
X 6.5	X	O		O	X
X 7	O	X		O	X
X 7.5	X	X		O	X
X 8	O	O		X	X
X 8.5	X	O		X	X
X 9	O	X		X	X
X 9.5	X	X		X	X
X 10	O	O		O	O
X 10.5	X	O		O	O
		7

CPU Speed Setup

FFor Auto Jumper setting:

ON

1

2

3

4

5

6

SW1

«Note:

1.If you use 66, 100, 133 MHz CPU, we recommend you to set up your system speed to “Auto” value.

2.We don’t recommend you to set up your system speed to 75,83,112, 124, 140,150 MHz because these frequencies are not the standard specifications for CPU, Chipset and most of the peripherals. Whether your system can run under 75,83,112, 124, 140,150 MHz properly will depend on your hardware configurations: CPU, SDRAM, Cards, etc.

8

	6VX7-1394 Motherboard
	1. CeleronTM 533 / 66MHz FSB
	ON	ON
	1	1
		2
	2
		3
	3
		4
	4
		5
	SW2
		6
		SW1

2.CeleronTM 566 / 66 MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

3.Celeron TM 600 / 66 MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

9

CPU Speed Setup

4.Celeron TM 633 / 66 MHz FSB

	ON				ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

5.Celeron TM 667 / 66 MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

6.Celeron TM 700 / 66 MHz FSB

					ON
1
			1
2
			2
3
			3
4
			4
SW2			5
			6
			SW1

10

6VX7-1394 Motherboard

7.Pentium® !!! 500 / 100MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

8.Pentium® !!! 550 / 100MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

9.Pentium® !!! 600 / 100MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

11

CPU Speed Setup

10. Pentium® !!! 650 / 100MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

11. Pentium® !!! 700 / 100MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

12. Pentium® !!! 750 / 100MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

12

6VX7-1394 Motherboard

13. Pentium® !!! 800 / 100MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

14. Pentium® !!! 850 / 100MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

15. Pentium® !!! 533 / 133MHz FSB

		ON			ON
	1			1
	2			2
				3
	3
	4			4
				5
	SW2
				6
				SW1

13

CPU Speed Setup

16. Pentium® !!! 600 / 133MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

17. Pentium® !!! 667 / 133MHz FSB

	ON			ON
			1
1			2
2			3
3			4
4			5
			6
SW2
			SW1

18. Pentium® !!! 733 / 133MHz FSB

	ON			ON
1			1
2			2
3			3
4			4
			5
SW2
			6
			SW1

14

6VX7-1394 Motherboard

19. Pentium® !!! 800 / 133MHz FSB

	ON			ON
1			1
2			2
3			3
4			4
			5
SW2
			6
			SW1

20. Pentium® !!! 866 / 133MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

21. Pentium® !!! 933 / 133MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

15

CPU Speed Setup

22. Pentium®!!! 1GHz / 133MHz FSB

		ON			ON
	1			1
	2			2
	3			3
	4			4
				5
	SW2
				6
				SW1

16

6VX7-1394 Motherboard

Connectors

J13/J14/J15 : I EEE 1394 Connector

																																								Pin No.	Definition
																																								1	VP
																																								2	VG
																																								3	TPB-
																																								4	TPB+
																																								5	TPA-
																																								6	TPA+

COM A / COM B / LPT Port

LPT Port

COM A

COM B

17