6EMMP
|
TABLE OF CONTENTS |
|
1. |
INTRODUCTION |
|
|
1.1. PREFACE.......................................................................................................... |
1-1 |
|
1.2. KEY FEATURES ............................................................................................... |
1-1 |
|
1.3. PERFORMANCE LIST...................................................................................... |
1-2 |
|
1.4. BLOCK DIAGRAM ............................................................................................ |
1-3 |
|
1.5. INTRODUCE THE Pentiumâ II Processor ...................................................... |
1-4 |
|
1.6. What is AGP? .................................................................................................... |
1-6 |
2. |
SPECIFICATION |
|
|
2.1. HARDWARE ..................................................................................................... |
2-1 |
|
2.2. SOFTWARE...................................................................................................... |
2-2 |
|
2.3. ENVIRONMENT................................................................................................ |
2-2 |
3. |
HARDWARE INSTALLATION |
|
|
3.1. UNPACKING ..................................................................................................... |
3-1 |
|
3.2. MAINBOARD LAYOUT ..................................................................................... |
3-2 |
|
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS ............................. |
3-1 |
|
3.4. DRAM INSTALLATION..................................................................................... |
3-6 |
|
3.5. CPU SPEED SETUP ........................................................................................ |
3-6 |
|
3.6. CMOS RTC & ISA CFG CMOS SRAM............................................................. |
3-7 |
|
3.7. SPEAKER CONNECTOR INSTALLATION ..................................................... |
3-7 |
|
3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION.................... |
3-7 |
|
3.9. POWER LED CONNECTOR INSTALLATION ................................................ |
3-7 |
|
|
|
|
1 |
|
|
Table Of Contents |
3.10. IDE & ATAPI DEVICE INSTALLATION.......................................................... |
3-8 |
3.11. PERIPHERAL DEVICE INSTALLATION........................................................ |
3-8 |
3.12. KEYBOARD & PS/2 MOUSE INSTALLATION............................................... |
3-8 |
4. BIOS CONFIGURATION |
|
4.1. ENTERING SETUP .......................................................................................... |
4-1 |
4.2. CONTROL KEYS .............................................................................................. |
4-1 |
4.3. GETTING HELP................................................................................................ |
4-2 |
4.4. THE MAIN MENU.............................................................................................. |
4-2 |
4.5. STANDARD CMOS SETUP MENU ................................................................. |
4-5 |
4.6. BIOS FEATURES SETUP ................................................................................ |
4-9 |
4.7. CHIPSET FEATURES SETUP......................................................................... |
4-13 |
4.8. POWER MANAGEMENT SETUP .................................................................... |
4-16 |
4.9. PNP/PCI CONFIGURATION ............................................................................ |
4-21 |
4.10. LOAD BIOS DEFAULTS................................................................................. |
4-23 |
4.11. LOAD PERFORMANCE DEFAULTS ............................................................. |
4-22 |
4.12. INTEGRATED PERIPHERALS ...................................................................... |
4-23 |
4.13. SUPERVISOR/USER PASSWORD............................................................... |
4-30 |
4.14. IDE HDD AUTO DETECTION ........................................................................ |
4-31 |
4.15. SAVE & EXIT SETUP ..................................................................................... |
4-32 |
4.16. EXIT WITHOUT SAVING ............................................................................... |
4-33 |
APPENDIX A: On-Board Display Driver Installation |
|
A.1. ATi RAGE PRO DISPLAY DRIVER INSTALLATION ...................................... |
A-1 |
A.2. YAMAHA SOUND DRIVER INSTALLATION................................................... |
A-6 |
|
|
2 |
|
6EMMP
21
6EMMP
1.INTRODUCTION
1.1. PREFACE
Welcome to use the 6EMMP motherboard. It is a Pentiumâ II Processor based PC / AT compatible system with AGP/ PCI / ISA Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and how to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
qIntel Pentiumâ II Processor based PC / AT compatible mainboard.
qSlot 1 supports Pentiumâ II processor running at 233-633 MHz.
qIntel 440EX chipset, Supports SDRAM / Ultra DMA/33 IDE.
qBuilt-in ATi RAGE PRO 3D graphics acceleration chip.
qBuilt-in PCI YAMAHA audio chip.
qSupports external Modem Ring-On on COM A&B and internal Modem Ring-On.
qSupports Wake-up on LAN (JP7).
qSupports 2xDIMMs using 3.3V EDO or SDRAM DIMM module.
qSupports 8 MB - 256 MB EDO / 256MB SDRAM memory on board.
q2xPCI Bus slots, 2xISA Bus slots.
qSupports 2 channels Ultra DMA/33 IDE ports for 4 IDE Devices.
qSupports 2xCOM (16550), 1xLPT (EPP / ECP), 1x Floppy port.
qSupports 2xUSB ports, 1xPS/2 Mouse, 1xPS/2 Keyboard.
qLicensed AWARD BIOS, 2Mbits FLASH RAM.
q24.3 cm x 20 cm Micro-ATX form factor, 4 layers PCB.
1-1
Introduction
1.3. PERFORMANCE LIST
The following performance data list is the testing results of some popular benchmark testing programs.
These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.)
∙ CPU |
Pentiumâ II processor |
∙ DRAM |
(128 x 1) MB SDRAM (SEC KM48S8030BT-GH) |
∙ CACHE SIZE |
512 KB included in CPU |
∙ DISPLAY |
Onboard ATi AGP 3D graphics acceleration chip |
|
(4MB SGRAM) |
∙ STORAGE |
Onboard IDE (IBM DHEA-38451) |
∙ O.S. |
Windows NT 4.0 |
∙ DRIVER |
Display Driver at 1024 x 768 x 64K colors x 75Hz. |
|
INTEL Bus Master IDE Driver 3.01 |
|
Processor |
Intel Pentiumâ II |
|
|
266MHz(66x4) |
333MHz(66x5) |
|
|
|
||
|
|
|
|
|
Winbench98 |
|
|
|
|
|
|
|
CPU mark32 |
721 |
865 |
|
|
|
|
|
FPU Winmark |
1380 |
1720 |
|
|
|
|
|
Business Disk |
1800 |
1870 |
|
|
|
|
|
Hi-End Disk |
4500 |
4710 |
|
|
|
|
|
Business Graphics |
156 |
176 |
|
|
|
|
|
Hi-End Graphics |
174 |
198 |
|
|
|
|
|
Winstone98 |
|
|
|
Business |
27.2 |
32.4 |
|
Hi-End |
32.2 |
36.1 |
|
|
|
|
|
|
|
|
|
|
1-2 |
|
Loading...