Getac V100 QSG Owner's Manual
G
e
ta
c
S
ecr
et
C
onfide
nti
a
l
D
ocu
m
e
nt
Quick Start Guide
Congratulations and thank you for purchasing the computer.
This guide provides step-by-step instructions for a quick setup of your computer.
Install the battery pack
1
Install the battery pack if it has not been
installed in your computer.
Locate the battery compartment on the right
side of the computer. Open the compartment
cover by pressing on both sides of the release
latch using your thumb and index fingers.
Slide the battery pack all the way into the
slot. Make sure to observe the correct
orientation (the ribbon strip must face
outward for future battery back removal).
Connect AC power
2
The first time you use your computer, use the
AC adapter. This will allow the battery pack to
fully charge.
Plug the DC cord of the AC adapter to the
power connector on the computer.
Plug the female end of the AC power cord to
the AC adapter and the male end to an
electrical outlet.
The Battery Charge Indicator（ ）on the
computer glows yellow to indicate that
charging is in progress.
Power up
3
Open the top cover by pulling up on latch A
and releasing latch B (n) and lifting up the
cover (o). You can tilt the cover forward or
backward for optimal viewing clarity.
Latch B
Latch A
Press the power button ( ) to power up. The
operating system such as Windows should
start.
Find more information
4
For complete information, please refer to the
User’s Manual (in PDF format) supplied on the
driver disc.
Connect a DVD drive (option) to your
computer. Press the eject button of the DVD
drive. Fit the driver disc in the tray with its
label facing up. Then, press the eject button
or manually slide the tray back into place.
When the main screen appears, click Adobe
Reader to install the software for opening the
PDF manual file. Then, click User Guide to
view.
Close the compartment cover to secure the
battery pack.
P/N: 561512500011
November 2007
G
e
ta
c
S
ecr
et
C
onfide
nti
a
l
D
ocu
m
e
nt
r
r
r
r
r
Lig
r
r
Powe
Connecto
USB Ports
Modem (RJ-11)
Connecto
PCMCIA Slots
SD Card
Reader Slot
Network (RJ-45)
Connector
Device Indicators
Audio Output Connecto
Microphone Connecto
WLAN Antenna
WWAN 3G Antenna
(option)
LCD Screen
ht Senso
Keyboard
Touchpad
Kensington
Lock
VGA or Serial Connector
CMOS Camera or GPS Module (option)
Serial Connector
WLAN Antenna
WWAN 3G Antenna
(option)
Bluetooth Antenna
(option)
Touchscreen
Pen (option)
Battery Pack
Compartment
Hard Disk Drive
Compartment
Hand Strap Holde
LCD Brightness Buttons
Security Button
LCD Rotate Button
Software Keyboard Button
Cover Latch
Power Button
Hand Strap Holder
Loading...